Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jerome Brunet <jbrunet@baylibre.com>
To:     Kevin Hilman <khilman@baylibre.com>
Cc:     Jerome Brunet <jbrunet@baylibre.com>,
        linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH 2/7] arm64: dts: meson: p230-q200: add internal DAC support
Date:   Thu,  7 May 2020 00:16:51 +0200
Message-Id: <20200506221656.477379-3-jbrunet@baylibre.com>
In-Reply-To: <20200506221656.477379-1-jbrunet@baylibre.com>
References: <20200506221656.477379-1-jbrunet@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add the necessary bits to support the internal audio DAC the p230/q200
reference design derivated boards. The output of this DAC is provided
on the 3.5mm jack connector

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 .../boot/dts/amlogic/meson-gx-p23x-q20x.dtsi  | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index acb05a756aca..6b57e15aade3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -16,6 +16,13 @@ aliases {
 		ethernet0 = &ethmac;
 	};
 
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
@@ -115,6 +122,14 @@ hdmi_connector_in: endpoint {
 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "GX-P230-Q200";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLP",
+				"AU2 INR", "ACODEC LORP",
+				"AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -140,6 +155,10 @@ dai-link-2 {
 			codec-0 {
 				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
 			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
 		};
 
 		dai-link-3 {
@@ -157,9 +176,22 @@ codec-0 {
 				sound-dai = <&hdmi_tx>;
 			};
 		};
+
+		dai-link-5 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
 	};
 };
 
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
 &aiu {
 	status = "okay";
 	pinctrl-0 = <&spdif_out_h_pins>;
-- 
2.25.4