Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 7 May 2020 17:34:39 +0200
From:   Greg KH <gregkh@linuxfoundation.org>
To:     Manivannan Sadhasivam <mani@kernel.org>
Cc:     linux-serial@vger.kernel.org, devicetree@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        fabrice.gasnier@st.com, andy.shevchenko@gmail.com,
        robh+dt@kernel.org, mcoquelin.stm32@gmail.com,
        alexandre.torgue@st.com
Subject: Re: [PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART
Message-ID: <20200507153439.GA1919950@kroah.com>
References: <20200420170204.24541-1-mani@kernel.org>
 <20200507140750.GA2019@Mani-XPS-13-9360>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200507140750.GA2019@Mani-XPS-13-9360>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, May 07, 2020 at 07:37:50PM +0530, Manivannan Sadhasivam wrote:
> Hi Greg,
> 
> On Mon, Apr 20, 2020 at 10:32:02PM +0530, mani@kernel.org wrote:
> > From: Manivannan Sadhasivam <mani@kernel.org>
> > 
> > Hello,
> > 
> > This patchset adds CTS/RTS gpio support to STM32 UART controller.
> > Eventhough the UART controller supports using dedicated CTS/RTS gpios,
> > sometimes we need to use different set of gpios for flow control.
> > 
> > This is necessary for the upcoming STM32MP1 based board called Stinger96
> > IoT-Box. On that board, a bluetooth chip is connected to one of the UART
> > controller but the CTS/RTS lines got swapped mistakenly. So this patchset
> > serves as a workaround for that hardware bug and also supports the
> > usecase of using any gpio for CTS/RTS functionality. As per the sugggestion
> > provided by Andy for v1, I've now switched to mctrl_gpio driver.
> > 
> > This patchset has been validated with Stinger96 IoT-Box connected to Murata
> > WiFi-BT combo chip.
> > 
> 
> Are you planning to take this series for 5.8?

I had to wait for the DT protion to be reviewed before I could do
anything.  Give me some time, if it looks ok, it will go into 5.8.

thanks,

greg k-h