Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20200503222805.2668941-1-martin.blumenstingl@googlemail.com> <CAPDyKFrY0ApUCNL4gVHRc2FRcYaS0PKr_P4a18RUZHxcVceVWg@mail.gmail.com>
In-Reply-To: <CAPDyKFrY0ApUCNL4gVHRc2FRcYaS0PKr_P4a18RUZHxcVceVWg@mail.gmail.com>
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Thu, 7 May 2020 23:14:46 +0200
Message-ID: <CAFBinCAhLiunUvw+BAHnv3XVmmU=Wxs1i=WLAAFL5=Hn0RPOvQ@mail.gmail.com>
Subject: Re: [PATCH] mmc: meson-mx-sdio: trigger a soft reset after a timeout
 or CRC error
To:     Ulf Hansson <ulf.hansson@linaro.org>
Cc:     "open list:ARM/Amlogic Meson..." <linux-amlogic@lists.infradead.org>,
        "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
        Linux ARM <linux-arm-kernel@lists.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Tobias Baumann <017623705678@o2online.de>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Ulf,

On Thu, May 7, 2020 at 11:29 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Mon, 4 May 2020 at 00:28, Martin Blumenstingl
> <martin.blumenstingl@googlemail.com> wrote:
> >
> > The vendor driver (from the 3.10 kernel) triggers a soft reset every
> > time before starting a new command. While this fixes a problem where
> > SDIO cards are not detected at all (because all commands simply
> > timed out) this hurts SD card read performance a bit (in my tests
> > between 10% to 20%).
> >
> > Trigger a soft reset after we got a CRC error or if the previous command
> > timed out (just like the vendor driver from the same 3.10 kernel for the
> > newer SDHC controller IP does). This fixes detection of SDIO cards and
> > doesn't hurt SD card read performance at the same time.
> >
> > With this patch the initialization of an RTL8723BS SDIO card looks like
> > this:
> >   req done (CMD52): -110: 00000000 00000000 00000000 00000000
> >   clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0
> >   starting CMD0 arg 00000000 flags 000000c0
> >   req done (CMD0): 0: 00000000 00000000 00000000 00000000
> >   clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0
> >   starting CMD8 arg 000001aa flags 000002f5
> >   req done (CMD8): -110: 00000000 00000000 00000000 00000000
> >   starting CMD5 arg 00000000 flags 000002e1
> >   req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
> >   starting CMD5 arg 00200000 flags 000002e1
> >   req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
> >   starting CMD3 arg 00000000 flags 00000075
> >   req done (CMD3): 0: 00010000 00000000 00000000 00000000
> >   starting CMD7 arg 00010000 flags 00000015
> >   req done (CMD7): 0: 00001e00 00000000 00000000 00000000
> >   starting CMD52 arg 00000000 flags 00000195
> >   req done (CMD52): 0: 00001032 00000000 00000000 00000000
> >   [... more CMD52 omitted ...]
> >   clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
> >   clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
> >   starting CMD52 arg 00000e00 flags 00000195
> >   req done (CMD52): 0: 00001000 00000000 00000000 00000000
> >   starting CMD52 arg 80000e02 flags 00000195
> >   req done (CMD52): 0: 00001002 00000000 00000000 00000000
> >   clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2
> >   starting CMD52 arg 00020000 flags 00000195
> >   req done (CMD52): 0: 00001007 00000000 00000000 00000000
> >   [... more CMD52 omitted ...]
> >   new high speed SDIO card at address 0001
> >
> > Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > ---
> > Ulf, I consider this non-critical because as long as the meson-mx-sdhc
> > driver is not merged we only have one MMC driver for these platforms.
> > I don't know anybody to prefer SDIO wifi over SD card access, so this
> > can go into -next (in my option at least).
> >
>
> Alright, applied for next, thanks!
thank you for taking this patch!

I received a confirmation (off-list) saying that this patch works as it should.
Tobias was not Cc'ed on the original mail so he gave me to permission
(again, off-list - he's Cc'ed now) to add his:
Tested-by: Tobias Baumann <017623705678@o2online.de>


Martin