Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752118AbWCJU3r (ORCPT ); Fri, 10 Mar 2006 15:29:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752103AbWCJU3q (ORCPT ); Fri, 10 Mar 2006 15:29:46 -0500 Received: from smtp-vbr2.xs4all.nl ([194.109.24.22]:24582 "EHLO smtp-vbr2.xs4all.nl") by vger.kernel.org with ESMTP id S1752109AbWCJU3q (ORCPT ); Fri, 10 Mar 2006 15:29:46 -0500 Date: Fri, 10 Mar 2006 21:29:29 +0100 From: jurriaan To: linux-kernel@vger.kernel.org Cc: shemminger@osdl.org Subject: skge/sk98lin slowdown with 4 Gb memory compared to 2 Gb memory Message-ID: <20060310202929.GA7308@amd64.of.nowhere> Reply-To: Jurriaan MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.11+cvs20060126 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35632 Lines: 789 I've just increased the memory on my A8N-SLI Deluxe from 2 Gb to 4 Gb. Since then, network connections on my second network card have gone so slow as to be almost unusable. Two pc's, each connected over a gigabit switch, each get pings at 2 ms each packet, where booting with mem=2G immediately fixes that to pings at 0.2 or 0.1 second each. This happens in kernel 2.6.16-rc5-mm2, with both the sk98lin and the skge driver. Is this a known phenomenon? I can't be the first A8N-SLI user that increases memory to 4 Gb I hope! Below is the dmesg output when booting with mem=2G. I'd love to know how I can fix this, or how I can help others debug this. thanks, Jurriaan Bootdata ok (command line is root=/dev/md2 mem=2G video=nvidiafb:1600x1200-32@85 atkbd.softrepeat=1) Linux version 2.6.16-rc5-mm2 (jurriaan@middle) (gcc version 4.0.3 20060304 (prerelease) (Debian 4.0.2-10)) #3 Fri Mar 10 20:55:28 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 (usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7d30 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff30c0 ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x00000000bfff9900 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9a00 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9840 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 515247 DMA zone: 2167 pages, LIFO batch:0 DMA32 zone: 513080 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:7 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) Checking aperture... CPU 0: aperture @ 8000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/md2 mem=2G video=nvidiafb:1600x1200-32@85 atkbd.softrepeat=1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2750.021 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2057664k/2097152k available (3808k kernel code, 39012k reserved, 2307k data, 224k init) Calibrating delay using timer specific routine.. 5503.34 BogoMIPS (lpj=11006697) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3700+ stepping 01 Using local APIC timer interrupts. result 15625121 Detected 15.625 MHz APIC timer. testing NMI watchdog ... OK. DMI 2.3 present. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20060210 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Generic PHY: Registered new driver SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report initcall at 0xffffffff807b1d10: late_hpet_init+0x0/0xe0(): returned with error code -1 PCI-DMA: Disabling IOMMU. initcall at 0xffffffff807baaf0: pci_iommu_init+0x0/0x5a0(): returned with error code -1 PCI: Bridge: 0000:00:09.0 IO window: 6000-afff MEM window: d8000000-d9ffffff PREFETCH window: da100000-da1fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: d0000000-d7ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 ACPI (acpi_bus-0216): Device 'XVR3' is not power manageable [20060210] PCI: Setting latency timer of device 0000:00:0b.0 to 64 ACPI (acpi_bus-0216): Device 'XVR2' is not power manageable [20060210] PCI: Setting latency timer of device 0000:00:0c.0 to 64 ACPI (acpi_bus-0216): Device 'XVR1' is not power manageable [20060210] PCI: Setting latency timer of device 0000:00:0d.0 to 64 ACPI (acpi_bus-0216): Device 'XVR0' is not power manageable [20060210] PCI: Setting latency timer of device 0000:00:0e.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.26 [Flags: R/O]. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 GSI 16 sharing vector 0xD9 and IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 217 nvidiafb: PCI id - 10de0141 nvidiafb: Actual id - 10de0141 nvidiafb: nVidia device/chipset 10DE0141 nvidiafb: CRTC0 analog found nvidiafb: CRTC1 analog found nvidiafb: EDID found from BUS2 nvidiafb: CRTC 0 appears to have a CRT attached nvidiafb: Using CRT on CRTC 0 nvidiafb: MTRR set to ON Console: switching to colour frame buffer device 160x66 nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0xC0000000) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] Using specific hotkey driver initcall at 0xffffffff807c4735: hotkey_init+0x0/0x21d(): returned with error code -19 lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 initcall at 0xffffffff807c6390: rng_init+0x0/0xc0(): returned with error code -19 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A isa bounce pool size: 16 pages Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 6.3.9-k4 Copyright (c) 1999-2005 Intel Corporation. ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 17 sharing vector 0xE1 and IRQ 17 ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 225 skge 1.3 addr 0xd9008000 irq 225 chip Yukon-Lite rev 9 skge eth0: addr 00:15:f2:20:e6:69 Marvell 88E1101: Registered new driver Davicom DM9161E: Registered new driver Davicom DM9131: Registered new driver Cicada Cis8204: Registered new driver LXT970: Registered new driver LXT971: Registered new driver QS6612: Registered new driver forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.52. ACPI (acpi_bus-0216): Device 'MMAC' is not power manageable [20060210] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 ACPI (acpi_bus-0216): Device 'IDE0' is not power manageable [20060210] NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: WDC WD2000JB-32EVA0, ATA DISK drive hdb: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD2000JB-00FUA0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hdc: max request size: 512KiB hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 > hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. sata_sil 0000:05:0a.0: version 0.9 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 19 sharing vector 0x32 and IRQ 19 ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 50 sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix ata1: SATA max UDMA/100 cmd 0xFFFFC20000004080 ctl 0xFFFFC2000000408A bmdma 0xFFFFC20000004000 irq 50 ata2: SATA max UDMA/100 cmd 0xFFFFC200000040C0 ctl 0xFFFFC200000040CA bmdma 0xFFFFC20000004008 irq 50 ata3: SATA max UDMA/100 cmd 0xFFFFC20000004280 ctl 0xFFFFC2000000428A bmdma 0xFFFFC20000004200 irq 50 ata4: SATA max UDMA/100 cmd 0xFFFFC200000042C0 ctl 0xFFFFC200000042CA bmdma 0xFFFFC20000004208 irq 50 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: SATA link up 1.5 Gbps (SStatus 113) ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata2: dev 0 configured for UDMA/100 scsi1 : sata_sil ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f ata3: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata3: dev 0 configured for UDMA/100 scsi2 : sata_sil ata4: SATA link up 1.5 Gbps (SStatus 113) ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f ata4: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata4: dev 0 configured for UDMA/100 scsi3 : sata_sil Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3250823AS Rev: 3.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 sata_nv 0000:00:07.0: version 0.8 ACPI (acpi_bus-0216): Device 'SAT1' is not power manageable [20060210] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 GSI 20 sharing vector 0x3A and IRQ 20 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata5: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 58 ata6: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 58 ata5: SATA link up 3.0 Gbps (SStatus 123) ata5: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata5: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata5: dev 0 configured for UDMA/133 scsi4 : sata_nv ata6: SATA link up 1.5 Gbps (SStatus 113) ata6: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata6: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata6: dev 0 configured for UDMA/133 scsi5 : sata_nv Vendor: ATA Model: ST3300622AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 ACPI (acpi_bus-0216): Device 'SAT2' is not power manageable [20060210] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 GSI 21 sharing vector 0x42 and IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata7: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 66 ata8: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 66 ata7: SATA link up 3.0 Gbps (SStatus 123) ata7: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata7: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata7: dev 0 configured for UDMA/133 scsi6 : sata_nv ata8: SATA link up 1.5 Gbps (SStatus 113) ata8: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata8: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata8: dev 0 configured for UDMA/133 scsi7 : sata_nv Vendor: ATA Model: ST3300622AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc1 sd 2:0:0:0: Attached scsi disk sdc SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back sdd: sdd1 sd 3:0:0:0: Attached scsi disk sdd SCSI device sde: 586072368 512-byte hdwr sectors (300069 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: drive cache: write back SCSI device sde: 586072368 512-byte hdwr sectors (300069 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: drive cache: write back sde: sde1 sde2 sd 4:0:0:0: Attached scsi disk sde SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: drive cache: write back SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: drive cache: write back sdf: sdf1 sd 5:0:0:0: Attached scsi disk sdf SCSI device sdg: 586072368 512-byte hdwr sectors (300069 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: drive cache: write back SCSI device sdg: 586072368 512-byte hdwr sectors (300069 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: drive cache: write back sdg: sdg1 sdg2 sd 6:0:0:0: Attached scsi disk sdg SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: drive cache: write back SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: drive cache: write back sdh: sdh1 sd 7:0:0:0: Attached scsi disk sdh sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:0: Attached scsi generic sg4 type 0 sd 5:0:0:0: Attached scsi generic sg5 type 0 sd 6:0:0:0: Attached scsi generic sg6 type 0 sd 7:0:0:0: Attached scsi generic sg7 type 0 ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:05:08.2[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 50 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50] MMIO=[d900d000-d900d7ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 22 sharing vector 0x4A and IRQ 22 ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 74 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[74] MMIO=[d900c000-d900c7ff] Max Packet=[2048] IR/IT contexts=[4/8] video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance usbmon: debugfs is not available initcall at 0xffffffff807caf70: mon_init+0x0/0x20(): returned with error code -19 ACPI (acpi_bus-0216): Device 'USB2' is not power manageable [20060210] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 GSI 23 sharing vector 0x52 and IRQ 23 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 82, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16-rc5-mm2 ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI (acpi_bus-0216): Device 'USB0' is not power manageable [20060210] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 233, io mem 0xda004000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16-rc5-mm2 ohci_hcd usb usb2: SerialNumber: 0000:00:02.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 i2c /dev entries driver md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 8828.000 MB/sec raid5: using function: generic_sse (8828.000 MB/sec) raid6: int64x1 2174 MB/s raid6: int64x2 2911 MB/s raid6: int64x4 3188 MB/s raid6: int64x8 2314 MB/s raid6: sse2x1 2712 MB/s raid6: sse2x2 4141 MB/s raid6: sse2x4 4496 MB/s raid6: using algorithm sse2x4 (4496 MB/s) md: raid6 personality registered for level 6 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 8 NET: Registered protocol family 20 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: BIOS error - no PSB or ACPI _PSS objects initcall at 0xffffffff807ba030: powernowk8_init+0x0/0x40(): returned with error code -19 ACPI: wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 ACPI: (supports S0 S1 S3 S4 S5) drivers/rtc/hctosys.c: unable to open rtc device (rtc0) initcall at 0xffffffff807cb470: rtc_hctosys+0x0/0x180(): returned with error code -19 md: Autodetecting RAID arrays. logips2pp: Detected unknown logitech mouse model 1 md: autorun ... md: considering sdh1 ... md: adding sdh1 ... md: adding sdg1 ... md: adding sdf1 ... md: adding sde1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: hdc9 has different UUID to sdh1 md: hdc8 has different UUID to sdh1 md: hdc7 has different UUID to sdh1 md: hdc6 has different UUID to sdh1 md: hdc5 has different UUID to sdh1 md: hda9 has different UUID to sdh1 md: hda8 has different UUID to sdh1 md: hda7 has different UUID to sdh1 md: hda6 has different UUID to sdh1 md: hda5 has different UUID to sdh1 md: created md0 md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: running: raid6: device sdh1 operational as raid disk 1 raid6: device sdg1 operational as raid disk 4 raid6: device sdf1 operational as raid disk 5 raid6: device sde1 operational as raid disk 6 raid6: device sdd1 operational as raid disk 2 raid6: device sdc1 operational as raid disk 0 raid6: device sdb1 operational as raid disk 7 raid6: device sda1 operational as raid disk 3 raid6: allocated 8460kB for md0 raid6: raid level 6 set md0 active with 8 out of 8 devices, algorithm 2 RAID6 conf printout: --- rd:8 wd:8 fd:0 disk 0, o:1, dev:sdc1 disk 1, o:1, dev:sdh1 disk 2, o:1, dev:sdd1 disk 3, o:1, dev:sda1 disk 4, o:1, dev:sdg1 disk 5, o:1, dev:sdf1 disk 6, o:1, dev:sde1 disk 7, o:1, dev:sdb1 md0: bitmap initialized from disk: read 15/15 pages, set 1 bits, status: 0 created bitmap (233 pages) for device md0 md: considering hdc9 ... md: adding hdc9 ... md: hdc8 has different UUID to hdc9 md: hdc7 has different UUID to hdc9 md: hdc6 has different UUID to hdc9 md: hdc5 has different UUID to hdc9 md: adding hda9 ... md: hda8 has different UUID to hdc9 md: hda7 has different UUID to hdc9 md: hda6 has different UUID to hdc9 md: hda5 has different UUID to hdc9 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md4: bitmap initialized from disk: read 10/10 pages, set 5 bits, status: 0 created bitmap (156 pages) for device md4 md: considering hdc8 ... md: adding hdc8 ... md: hdc7 has different UUID to hdc8 md: hdc6 has different UUID to hdc8 md: hdc5 has different UUID to hdc8 md: adding hda8 ... md: hda7 has different UUID to hdc8 md: hda6 has different UUID to hdc8 md: hda5 has different UUID to hdc8 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d80000738f5d] md3: bitmap initialized from disk: read 8/8 pages, set 4 bits, status: 0 created bitmap (123 pages) for device md3 md: considering hdc7 ... md: adding hdc7 ... md: hdc6 has different UUID to hdc7 md: hdc5 has different UUID to hdc7 md: adding hda7 ... md: hda6 has different UUID to hdc7 md: hda5 has different UUID to hdc7 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md2: bitmap initialized from disk: read 8/8 pages, set 88 bits, status: 0 created bitmap (123 pages) for device md2 md: considering hdc6 ... md: adding hdc6 ... md: hdc5 has different UUID to hdc6 md: adding hda6 ... md: hda5 has different UUID to hdc6 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md1: bitmap initialized from disk: read 12/12 pages, set 66 bits, status: 0 created bitmap (184 pages) for device md1 md: considering hdc5 ... md: adding hdc5 ... md: adding hda5 ... md: created md5 md: bind md: bind md: running: raid1: raid set md5 active with 2 out of 2 mirrors md5: bitmap initialized from disk: read 9/9 pages, set 0 bits, status: 0 created bitmap (129 pages) for device md5 md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 ieee1394: Host added: ID:BUS[0-01:1023] GUID[00023c014100f4bf] i2c_adapter i2c-3: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-4: nForce2 SMBus adapter at 0x4c40 HPT374: IDE controller at PCI slot 0000:05:06.0 ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 74 HPT374: chipset revision 7 HPT374: 100% native mode on irq 74 HPT37X: using 33MHz PCI clock ide2: BM-DMA at 0x7000-0x7007, BIOS settings: hde:DMA, hdf:pio HPT37X: using 33MHz PCI clock ide3: BM-DMA at 0x7008-0x700f, BIOS settings: hdg:pio, hdh:pio ACPI: PCI Interrupt 0000:05:06.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 74 HPT37X: using 33MHz PCI clock ide4: BM-DMA at 0x8400-0x8407, BIOS settings: hdi:DMA, hdj:pio HPT37X: using 33MHz PCI clock ide5: BM-DMA at 0x8408-0x840f, BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide2... hde: WDC WD2500JB-00FUA0, ATA DISK drive ide2 at 0x6000-0x6007,0x6402 on irq 74 hde: max request size: 512KiB hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100) hde: cache flushes supported hde: hde1 Probing IDE interface ide3... Probing IDE interface ide4... hdi: ST3300831A, ATA DISK drive ide4 at 0x7400-0x7407,0x7802 on irq 74 hdi: max request size: 512KiB hdi: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100) hdi: cache flushes supported hdi: hdi1 Probing IDE interface ide5... ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 217 Installing spdif_bug patch: Audigy 2 ZS [2001] hdb: Speed warnings UDMA 3/4/5 is not functional. Adding 4200888k swap on /dev/md5. Priority:-1 extents:1 across:4200888k EXT3 FS on md2, internal journal it87: Found IT8712F chip at 0x290, revision 7 kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on md1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md3, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: md4: found reiserfs format "3.6" with standard journal ReiserFS: md4: using ordered data mode ReiserFS: md4: journal params: device md4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md4: checking transaction log (md4) ReiserFS: md4: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hde1: found reiserfs format "3.6" with standard journal ReiserFS: hde1: using ordered data mode ReiserFS: hde1: journal params: device hde1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hde1: checking transaction log (hde1) ReiserFS: hde1: Using r5 hash to sort names ReiserFS: sde2: found reiserfs format "3.6" with standard journal ReiserFS: sde2: using ordered data mode ReiserFS: sde2: journal params: device sde2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sde2: checking transaction log (sde2) ReiserFS: sde2: Using r5 hash to sort names ReiserFS: sdg2: found reiserfs format "3.6" with standard journal ReiserFS: sdg2: using ordered data mode ReiserFS: sdg2: journal params: device sdg2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdg2: checking transaction log (sdg2) ReiserFS: sdg2: Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hdi1, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge switch: enabling interface ADDRCONF(NETDEV_UP): switch: link is not ready ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack skge switch: Link is up at 1000 Mbps, full duplex, flow control tx and rx ADDRCONF(NETDEV_CHANGE): switch: link becomes ready adsl: no IPv6 routers present switch: no IPv6 routers present -- I've seen those who try to make a life without kin for ever So I've taken my place uncertain at your shoulder The last few prayers, the whistle blow, And into the fray once more we go My people right or wrong New Model Army - My People Debian (Unstable) GNU/Linux 2.6.16-rc5-mm2 5503 bogomips load 4.52 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/