Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ivan Mikhaylov <i.mikhaylov@yadro.com>
CC:     Ivan Mikhaylov <i.mikhaylov@yadro.com>,
        Jonathan Cameron <jic23@kernel.org>,
        Hartmut Knaack <knaack.h@gmx.de>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
        <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>, Mark Rutland <mark.rutland@arm.com>,
        Rob Herring <robh+dt@kernel.org>,
        Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: [PATCH v14 0/2] iio: proximity: driver for vcnl3020
Date:   Sun, 10 May 2020 21:45:35 +0300
Message-ID: <20200510184537.10335-1-i.mikhaylov@yadro.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
To:     unlisted-recipients:; (no To-header on input)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add proximity sensor driver for Vishay vcnl3020. Only on-demand
measurement is supported for now.

Changes from v13:
   1. description change for LED current.

Changes from v12:
   1. forgot to change path inside yaml.

Changes from v11:
   1. minor changes to yaml.

Changes from v10:
   1. add vcnl3020_property struct for optional properties.

Changes from v9:
   1. minor changes.
   2. pass microamps from dts, not register value.

Changes from v8:
   1. add vcnl3020 prefix into get_and_apply_property function.
   2. add bsd license into yaml.
   3. vishay,led-current-milliamp -> vishay,led-current-microamp.
   4. add default value into vishay,led-current-microamp and change
      register values into microamps.

Changes from v7:
   1. forgot to add Reviewed-by tag.

Changes from v6:
   1. minor changes
     1.1 remove VCNL_DRV_NAME
     1.2 add braces in get_and_apply_property

Changes from v5:
   1. add get_and_apply_property function for optional parameters.
   2. minor changes.

Changes from v4:
   1. add vdd-supply,vddio-supply,interrupts properties into yaml.
   2. led-current -> vishay,led-current-milliamp in yaml.
   3. add possible values enum list.
   4. add bulk_read for result hi/lo registers.
   5. add description of vcnl3020_data structure.
   6. vcnl3020 id table is removed.
   7. make "vishay,led-current-milliamp" optional in yaml and code.

Changes from v3:
   1. minor changes.
   2. add i2c block to fix dts section in yaml.

Changes from v2:
   1. using regmap_read_poll_timeout instead of do-while in measurement
      function.
   2. change struct i2client* in vcnl3020_data to struct dev*
   3. enable REGMAP_I2C in Kconfig

Changes from v1:
   1. using regmap interface instead of i2c_smbus_* calls.
   2. switch from probe to probe_new.
   3. s32/int32_t -> int

Ivan Mikhaylov (2):
  dt-bindings: proximity: provide vcnl3020 device tree binding document
  iio: proximity: Add driver support for vcnl3020 proximity sensor

 .../iio/proximity/vishay,vcnl3020.yaml        |  62 +++++
 drivers/iio/proximity/Kconfig                 |  11 +
 drivers/iio/proximity/Makefile                |   1 +
 drivers/iio/proximity/vcnl3020.c              | 258 ++++++++++++++++++
 4 files changed, 332 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
 create mode 100644 drivers/iio/proximity/vcnl3020.c

-- 
2.21.1