Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Ondrej Jirman <megous@megous.com>
To:     linux-sunxi@googlegroups.com,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Maxime Ripard <mripard@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>
Cc:     Ondrej Jirman <megous@megous.com>, Luca Weiss <luca@z3ntu.xyz>,
        Tomas Novotny <tomas@novotny.cz>, linux-input@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] Add support for vibrator motor for TBS A711 Tablet
Date:   Wed, 13 May 2020 00:22:01 +0200
Message-Id: <20200512222205.1456300-1-megous@megous.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The tablet has a vibrator motor. This patch series exposes it via
input subsystem (EV_FF).

I'd like to ask input maintainers to take the patches 1 and 2.
Patches 3 and 4 should go via the sunxi tree.

The change to the vibrator driver is meant to enable toggling the
vibrator motor just via a power supply itself. There's not additional
gpio driven switch on this tablet between the power supply for the
motor and the motor.

Please take a look.

Changes in v2:
- Added DT ack tag
- Add more information to the commit log (re use of LDO for the power)


thank you and regards,
  Ondrej Jirman

Ondrej Jirman (4):
  dt-bindings: input: gpio-vibrator: Don't require enable-gpios
  input: gpio-vibra: Allow to use vcc-supply alone to control the
    vibrator
  ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor
  ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator

 .../devicetree/bindings/input/gpio-vibrator.yaml         | 1 -
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts                | 9 +++++++--
 drivers/input/misc/gpio-vibra.c                          | 3 ++-
 3 files changed, 9 insertions(+), 4 deletions(-)

-- 
2.26.2