Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <8d29eba045ef18c5489e122b3668afc20431f15d.1588043236.git.baolin.wang7@gmail.com>
 <4b224e7bb703e15469e5cd79a54f7bc00a790fc5.1588043236.git.baolin.wang7@gmail.com>
 <CADBw62pDp4NByqNJ+ryUdBUi7GsW3tD8_vSN7iRGekThw0Xo+Q@mail.gmail.com>
 <CABb+yY2Pph4EeQtg9xSaCWHqcXr0mVNkrrFYm-E3x3f5xaxygg@mail.gmail.com>
 <CADBw62rrQ=Po76qpJoUj1za9Hg=T+=eEJf=Yv3UmLFLtRZvwsg@mail.gmail.com> <CADBw62oFTV3MPuFQSL0MWyYQWy9MuhL70w5HGHPPV1EXBd3KEQ@mail.gmail.com>
In-Reply-To: <CADBw62oFTV3MPuFQSL0MWyYQWy9MuhL70w5HGHPPV1EXBd3KEQ@mail.gmail.com>
From:   Jassi Brar <jassisinghbrar@gmail.com>
Date:   Wed, 13 May 2020 01:05:08 -0500
Message-ID: <CABb+yY1gXxpU=q9xKf14uZtJz51kLJ-k2EeWsjnFRyBzR5bmgA@mail.gmail.com>
Subject: Re: [PATCH v4 2/2] mailbox: sprd: Add Spreadtrum mailbox driver
To:     Baolin Wang <baolin.wang7@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>, Orson Zhai <orsonzhai@gmail.com>,
        Chunyan Zhang <zhang.lyra@gmail.com>,
        Devicetree List <devicetree@vger.kernel.org>,
        LKML <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, May 12, 2020 at 11:14 PM Baolin Wang <baolin.wang7@gmail.com> wrote:
>
> Hi Jassi,
>
> On Thu, May 7, 2020 at 11:23 AM Baolin Wang <baolin.wang7@gmail.com> wrote:
> >
> > Hi Jassi,
> >
> > On Thu, May 7, 2020 at 7:25 AM Jassi Brar <jassisinghbrar@gmail.com> wrote:
> > >
> > > On Wed, May 6, 2020 at 8:29 AM Baolin Wang <baolin.wang7@gmail.com> wrote:
> > > >
> > > > Hi Jassi,
> > > >
> > > > On Tue, Apr 28, 2020 at 11:10 AM Baolin Wang <baolin.wang7@gmail.com> wrote:
> > > > >
> > > > > From: Baolin Wang <baolin.wang@unisoc.com>
> > > > >
> > > > > The Spreadtrum mailbox controller supports 8 channels to communicate
> > > > > with MCUs, and it contains 2 different parts: inbox and outbox, which
> > > > > are used to send and receive messages by IRQ mode.
> > > > >
> > > > > Signed-off-by: Baolin Wang <baolin.wang@unisoc.com>
> > > > > Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
> > > > > ---
> > > > > Changes from v3:
> > > > >  - Save the id in mbox_chan.con_priv and remove the 'sprd_mbox_chan'
> > > > >
> > > > > Changes from v2:
> > > > >  - None.
> > > > >
> > > > > Changes from v1:
> > > > >  - None
> > > >
> > > > Gentle ping, do you have any other comments? Thanks.
> > > >
> > > Yea, I am still not sure about the error returned in send_data().  It
> > > will either never hit or there will be no easy recovery from it. The
> > > api expects the driver to tell it the last-tx was done only when it
> > > can send the next message. (There may be case like sending depend on
> > > remote, which can't be ensured before hand).
> >
> > Actually this is an unusual case, suppose the remote target did not
> > fetch the message as soon as possile, which will cause the FIFO
> > overflow, so in this case we  can not send messages to the remote
> > target any more, otherwise messages will be lost. Thus we can return
> > errors to users to indicate that something wrong with the remote
> > target need to be checked.
> >
> > So this validation in send_data() is mostly for debugging for this
> > abnormal case and we will not trigger this issue if the remote target
> > works well. So I think it is useful to keep this validation in
> > send_data(). Thanks.
>
> Any comments? Thanks.
>
Same as my last post.

thnx