Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Bharat Bhushan <bbhushan2@marvell.com>
To:     "Michael S. Tsirkin" <mst@redhat.com>
CC:     "jean-philippe@linaro.org" <jean-philippe@linaro.org>,
        "joro@8bytes.org" <joro@8bytes.org>,
        "jasowang@redhat.com" <jasowang@redhat.com>,
        "virtualization@lists.linux-foundation.org" 
        <virtualization@lists.linux-foundation.org>,
        "iommu@lists.linux-foundation.org" <iommu@lists.linux-foundation.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "eric.auger.pro@gmail.com" <eric.auger.pro@gmail.com>,
        "eric.auger@redhat.com" <eric.auger@redhat.com>
Subject: RE: [EXT] Re: [PATCH v5] iommu/virtio: Use page size bitmap supported
 by endpoint
Thread-Topic: [EXT] Re: [PATCH v5] iommu/virtio: Use page size bitmap
 supported by endpoint
Thread-Index: AQHWIr/tb/HaX8dazk+c9DNGI+wgB6iaM2OAgAuUpfA=
Date:   Wed, 13 May 2020 09:15:22 +0000
Message-ID: <MWHPR1801MB1966A23A0298654CA6965FB9E3BF0@MWHPR1801MB1966.namprd18.prod.outlook.com>
References: <20200505093004.1935-1-bbhushan2@marvell.com>
 <20200505200659-mutt-send-email-mst@kernel.org>
In-Reply-To: <20200505200659-mutt-send-email-mst@kernel.org>
Accept-Language: en-IN, en-US
Content-Language: en-US
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-MS-Exchange-CrossTenant-Network-Message-Id: d10298e7-bbb5-4f6d-7ce3-08d7f71e2a3c
X-MS-Exchange-CrossTenant-originalarrivaltime: 13 May 2020 09:15:22.4631
 (UTC)
X-MS-Exchange-CrossTenant-fromentityheader: Hosted
X-MS-Exchange-CrossTenant-id: 70e1fb47-1155-421d-87fc-2e58f638b6e0
X-MS-Exchange-CrossTenant-mailboxtype: HOSTED
X-MS-Exchange-CrossTenant-userprincipalname: Y/mRBvUehN3ulxx/QFJiQWF1pVMfZtUwqwdoNDTX+KYdXeOILh6pvsli/SWJ7NSn6Zpl01uRULd4DGxnhPhVrA==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: MWHPR1801MB1966
X-OriginatorOrg: marvell.com
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.216,18.0.676
 definitions=2020-05-13_03:2020-05-11,2020-05-13 signatures=0
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Hi Jean,

> -----Original Message-----
> From: Michael S. Tsirkin <mst@redhat.com>
> Sent: Wednesday, May 6, 2020 5:53 AM
> To: Bharat Bhushan <bbhushan2@marvell.com>
> Cc: jean-philippe@linaro.org; joro@8bytes.org; jasowang@redhat.com;
> virtualization@lists.linux-foundation.org; iommu@lists.linux-foundation.o=
rg;
> linux-kernel@vger.kernel.org; eric.auger.pro@gmail.com; eric.auger@redhat=
.com
> Subject: [EXT] Re: [PATCH v5] iommu/virtio: Use page size bitmap supporte=
d by
> endpoint
>=20
> External Email
>=20
> ----------------------------------------------------------------------
> On Tue, May 05, 2020 at 03:00:04PM +0530, Bharat Bhushan wrote:
> > Different endpoint can support different page size, probe endpoint if
> > it supports specific page size otherwise use global page sizes.
> >
> > Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
> > ---
> > v4->v5:
> >  - Rebase to Linux v5.7-rc4
> >
> > v3->v4:
> >  - Fix whitespace error
> >
> > v2->v3:
> >  - Fixed error return for incompatible endpoint
> >  - __u64 changed to __le64 in header file
> >
> >  drivers/iommu/virtio-iommu.c      | 48 ++++++++++++++++++++++++++++---
> >  include/uapi/linux/virtio_iommu.h |  7 +++++
> >  2 files changed, 51 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iommu/virtio-iommu.c
> > b/drivers/iommu/virtio-iommu.c index d5cac4f46ca5..9513d2ab819e 100644
> > --- a/drivers/iommu/virtio-iommu.c
> > +++ b/drivers/iommu/virtio-iommu.c
> > @@ -78,6 +78,7 @@ struct viommu_endpoint {
> >  	struct viommu_dev		*viommu;
> >  	struct viommu_domain		*vdomain;
> >  	struct list_head		resv_regions;
> > +	u64				pgsize_bitmap;
> >  };
> >
> >  struct viommu_request {
> > @@ -415,6 +416,19 @@ static int viommu_replay_mappings(struct
> viommu_domain *vdomain)
> >  	return ret;
> >  }
> >
> > +static int viommu_set_pgsize_bitmap(struct viommu_endpoint *vdev,
> > +				    struct virtio_iommu_probe_pgsize_mask *mask,
> > +				    size_t len)
> > +{
> > +	u64 pgsize_bitmap =3D le64_to_cpu(mask->pgsize_bitmap);
> > +
> > +	if (len < sizeof(*mask))
>=20
> This is too late to validate length, you have dereferenced it already.
> do it before the read pls.
>=20
> > +		return -EINVAL;
>=20
> OK but note that guest will then just proceed to ignore the property. Is =
that really
> OK? Wouldn't host want to know?
>=20
>=20
> > +
> > +	vdev->pgsize_bitmap =3D pgsize_bitmap;
>=20
> what if bitmap is 0? Is that a valid size? I see a bunch of BUG_ON with t=
hat value ...
>=20
> I also see a bunch of code like e.g. this:
>=20
>         pg_size =3D 1UL << __ffs(pgsize_bitmap);
>=20
> which probably won't DTRT on a 32 bit guest if the bitmap has bits set in=
 the high
> word.
>=20
>=20
>=20
> > +	return 0;
> > +}
> > +
> >  static int viommu_add_resv_mem(struct viommu_endpoint *vdev,
> >  			       struct virtio_iommu_probe_resv_mem *mem,
> >  			       size_t len)
> > @@ -499,6 +513,9 @@ static int viommu_probe_endpoint(struct viommu_dev
> *viommu, struct device *dev)
> >  		case VIRTIO_IOMMU_PROBE_T_RESV_MEM:
> >  			ret =3D viommu_add_resv_mem(vdev, (void *)prop, len);
> >  			break;
> > +		case VIRTIO_IOMMU_PROBE_T_PAGE_SIZE_MASK:
> > +			ret =3D viommu_set_pgsize_bitmap(vdev, (void *)prop, len);
> > +			break;
> >  		default:
> >  			dev_err(dev, "unknown viommu prop 0x%x\n", type);
> >  		}
> > @@ -630,7 +647,7 @@ static int viommu_domain_finalise(struct
> > viommu_endpoint *vdev,
> >
> >  	vdomain->id		=3D (unsigned int)ret;
> >
> > -	domain->pgsize_bitmap	=3D viommu->pgsize_bitmap;
> > +	domain->pgsize_bitmap	=3D vdev->pgsize_bitmap;
> >  	domain->geometry	=3D viommu->geometry;
> >
> >  	vdomain->map_flags	=3D viommu->map_flags;
> > @@ -654,6 +671,29 @@ static void viommu_domain_free(struct iommu_domain
> *domain)
> >  	kfree(vdomain);
> >  }
> >
> > +/*
> > + * Check whether the endpoint's capabilities are compatible with
> > +other
> > + * endpoints in the domain. Report any inconsistency.
> > + */
> > +static bool viommu_endpoint_is_compatible(struct viommu_endpoint *vdev=
,
> > +					  struct viommu_domain *vdomain) {
> > +	struct device *dev =3D vdev->dev;
> > +
> > +	if (vdomain->viommu !=3D vdev->viommu) {
> > +		dev_err(dev, "cannot attach to foreign vIOMMU\n");
> > +		return false;
> > +	}
> > +
> > +	if (vdomain->domain.pgsize_bitmap !=3D vdev->pgsize_bitmap) {
> > +		dev_err(dev, "incompatible domain bitmap 0x%lx !=3D 0x%llx\n",
> > +			vdomain->domain.pgsize_bitmap, vdev->pgsize_bitmap);
> > +		return false;
> > +	}
>=20
> I'm confused by this. So let's assume host supports pages sizes of 4k, 2M=
, 1G. It
> signals this in the properties. Nice.
> Now domain supports 4k, 2M and that's all. Why is that a problem?
> Just don't use 1G ...
>=20
>=20
> > +
> > +	return true;
> > +}
> > +
> >  static int viommu_attach_dev(struct iommu_domain *domain, struct
> > device *dev)  {
> >  	int i;
> > @@ -670,9 +710,8 @@ static int viommu_attach_dev(struct iommu_domain
> *domain, struct device *dev)
> >  		 * owns it.
> >  		 */
> >  		ret =3D viommu_domain_finalise(vdev, domain);
> > -	} else if (vdomain->viommu !=3D vdev->viommu) {
> > -		dev_err(dev, "cannot attach to foreign vIOMMU\n");
> > -		ret =3D -EXDEV;
> > +	} else if (!viommu_endpoint_is_compatible(vdev, vdomain)) {
> > +		ret =3D -EINVAL;
> >  	}
> >  	mutex_unlock(&vdomain->mutex);
> >
> > @@ -886,6 +925,7 @@ static int viommu_add_device(struct device *dev)
> >
> >  	vdev->dev =3D dev;
> >  	vdev->viommu =3D viommu;
> > +	vdev->pgsize_bitmap =3D viommu->pgsize_bitmap;
> >  	INIT_LIST_HEAD(&vdev->resv_regions);
> >  	dev_iommu_priv_set(dev, vdev);
> >
> > diff --git a/include/uapi/linux/virtio_iommu.h
> > b/include/uapi/linux/virtio_iommu.h
> > index 48e3c29223b5..2cced7accc99 100644
> > --- a/include/uapi/linux/virtio_iommu.h
> > +++ b/include/uapi/linux/virtio_iommu.h
>=20
> As any virtio UAPI change, you need to copy virtio TC at some point befor=
e this is
> merged ...
>=20
> > @@ -111,6 +111,7 @@ struct virtio_iommu_req_unmap {
> >
> >  #define VIRTIO_IOMMU_PROBE_T_NONE		0
> >  #define VIRTIO_IOMMU_PROBE_T_RESV_MEM		1
> > +#define VIRTIO_IOMMU_PROBE_T_PAGE_SIZE_MASK	2
> >
> >  #define VIRTIO_IOMMU_PROBE_T_MASK		0xfff
> >
>=20
> Does host need to know that guest will ignore the page size mask?
> Maybe we need a feature bit.
>=20
> > @@ -119,6 +120,12 @@ struct virtio_iommu_probe_property {
> >  	__le16					length;
> >  };
> >
> > +struct virtio_iommu_probe_pgsize_mask {
> > +	struct virtio_iommu_probe_property	head;
> > +	__u8					reserved[4];
> > +	__le64					pgsize_bitmap;
> > +};
> > +
>=20
> This is UAPI. Document the format of pgsize_bitmap please.

I do not see uapi documentation in "Documentation" folder of other data str=
uct in this file, am I missing something?

Thanks
-Bharat

>=20
>=20
> >  #define VIRTIO_IOMMU_RESV_MEM_T_RESERVED	0
> >  #define VIRTIO_IOMMU_RESV_MEM_T_MSI		1
> >
> > --
> > 2.17.1