Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: IVL8krBBDz81XPmoOdwSYh9RzqAyRcD2Px0PIbyLT0H2aSnf8ESqnWmyhVw5ts7LwgPUuYqB09
 3M4vXPKBbX7A==
IronPort-SDR: MXVJw72vgrOW7KmiCR4GlxZRP7+Lcw0fbtQaYoW4Apmijz5BPzS2woGUqdVDBshoNSx+OQcplo
 2YANBUKlnsXA==
From:   "Ooi, Joyce" <joyce.ooi@intel.com>
To:     Rob Herring <robh@kernel.org>
CC:     Thor Thayer <thor.thayer@linux.intel.com>,
        "David S . Miller" <davem@davemloft.net>,
        "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "Westergreen, Dalon" <dalon.westergreen@intel.com>,
        "Tan, Ley Foon" <ley.foon.tan@intel.com>,
        "See, Chin Liang" <chin.liang.see@intel.com>,
        "Nguyen, Dinh" <dinh.nguyen@intel.com>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        "Ooi, Joyce" <joyce.ooi@intel.com>
Subject: RE: [PATCHv2 10/10] net: eth: altera: update devicetree bindings
 documentation
Thread-Topic: [PATCHv2 10/10] net: eth: altera: update devicetree bindings
 documentation
Thread-Index: AQHWIe4nG3hE5Qb3KkWLunzlIQwQeKilHDcAgADbixA=
Date:   Wed, 13 May 2020 12:00:51 +0000
Message-ID: <BL0PR11MB3057066ACAE065DC9426FAE3F2BF0@BL0PR11MB3057.namprd11.prod.outlook.com>
References: <20200504082558.112627-1-joyce.ooi@intel.com>
 <20200504082558.112627-11-joyce.ooi@intel.com> <20200512225240.GA18344@bogus>
In-Reply-To: <20200512225240.GA18344@bogus>
Accept-Language: en-US
Content-Language: en-US
dlp-product: dlpe-windows
dlp-reaction: no-action
dlp-version: 11.2.0.6
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-MS-Exchange-CrossTenant-Network-Message-Id: 8dec8d24-3d81-4737-6254-08d7f7354855
X-MS-Exchange-CrossTenant-originalarrivaltime: 13 May 2020 12:00:51.2678
 (UTC)
X-MS-Exchange-CrossTenant-fromentityheader: Hosted
X-MS-Exchange-CrossTenant-id: 46c98d88-e344-4ed4-8496-4ed7712e255d
X-MS-Exchange-CrossTenant-mailboxtype: HOSTED
X-MS-Exchange-CrossTenant-userprincipalname: IBHiKq2veFR3I6E4S6m30+e3uTtSi5tGzByiGHA5p255YG8pn2GLIQDYwlUvWQQ+pMbivnQ6Q4lfubifXo+6lA==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BL0SPR01MB0023
X-OriginatorOrg: intel.com
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: Wednesday, May 13, 2020 6:53 AM
> To: Ooi, Joyce <joyce.ooi@intel.com>
> Cc: Thor Thayer <thor.thayer@linux.intel.com>; David S . Miller
> <davem@davemloft.net>; netdev@vger.kernel.org; linux-
> kernel@vger.kernel.org; Westergreen, Dalon
> <dalon.westergreen@intel.com>; Tan, Ley Foon <ley.foon.tan@intel.com>;
> See, Chin Liang <chin.liang.see@intel.com>; Nguyen, Dinh
> <dinh.nguyen@intel.com>; devicetree@vger.kernel.org
> Subject: Re: [PATCHv2 10/10] net: eth: altera: update devicetree bindings
> documentation
>=20
> On Mon, May 04, 2020 at 04:25:58PM +0800, Joyce Ooi wrote:
> > From: Dalon Westergreen <dalon.westergreen@intel.com>
> >
> > Update devicetree bindings documentation to include msgdma prefetcher
> > and ptp bindings.
> >
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: devicetree@vger.kernel.org
> > Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
> > Signed-off-by: Joyce Ooi <joyce.ooi@intel.com>
> > ---
> > v2: no change
> > ---
> >  .../devicetree/bindings/net/altera_tse.txt         | 103
> +++++++++++++++++----
> >  1 file changed, 84 insertions(+), 19 deletions(-)
>=20
> Reviewed-by: Rob Herring <robh@kernel.org>
>=20
> One nit below.
>=20
> >
> > diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt
> > b/Documentation/devicetree/bindings/net/altera_tse.txt
> > index 0b7d4d3758ea..2f2d12603907 100644
> > --- a/Documentation/devicetree/bindings/net/altera_tse.txt
> > +++ b/Documentation/devicetree/bindings/net/altera_tse.txt
> > @@ -2,53 +2,86 @@
> >
> >  Required properties:
> >  - compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and
> should
> > -		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based
> TSE.
> > +		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based
> TSE,
> > +		and "altr,tse-msgdma-2.0" for MSGDMA with prefetcher
> based
> > +		implementations.
> >  		ALTR is supported for legacy device trees, but is deprecated.
> >  		altr should be used for all new designs.
> >  - reg: Address and length of the register set for the device. It conta=
ins
> >    the information of registers in the same order as described by
> > reg-names
> >  - reg-names: Should contain the reg names
> > -  "control_port": MAC configuration space region
> > -  "tx_csr":       xDMA Tx dispatcher control and status space region
> > -  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
> > -  "rx_csr" :      xDMA Rx dispatcher control and status space region
> > -  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
> > -  "rx_resp":      MSGDMA Rx dispatcher response space region
> > -  "s1":		  SGDMA descriptor memory
> >  - interrupts: Should contain the TSE interrupts and it's mode.
> >  - interrupt-names: Should contain the interrupt names
> > -  "rx_irq":       xDMA Rx dispatcher interrupt
> > -  "tx_irq":       xDMA Tx dispatcher interrupt
> > +  "rx_irq":       DMA Rx dispatcher interrupt
> > +  "tx_irq":       DMA Tx dispatcher interrupt
> >  - rx-fifo-depth: MAC receive FIFO buffer depth in bytes
> >  - tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
> >  - phy-mode: See ethernet.txt in the same directory.
> >  - phy-handle: See ethernet.txt in the same directory.
> >  - phy-addr: See ethernet.txt in the same directory. A configuration sh=
ould
> >  		include phy-handle or phy-addr.
> > -- altr,has-supplementary-unicast:
> > -		If present, TSE supports additional unicast addresses.
> > -		Otherwise additional unicast addresses are not supported.
> > -- altr,has-hash-multicast-filter:
> > -		If present, TSE supports a hash based multicast filter.
> > -		Otherwise, hash-based multicast filtering is not supported.
> > -
> >  - mdio device tree subnode: When the TSE has a phy connected to its lo=
cal
> >  		mdio, there must be device tree subnode with the following
> >  		required properties:
> > -
> >  	- compatible: Must be "altr,tse-mdio".
> >  	- #address-cells: Must be <1>.
> >  	- #size-cells: Must be <0>.
> >
> >  	For each phy on the mdio bus, there must be a node with the
> following
> >  	fields:
> > -
> >  	- reg: phy id used to communicate to phy.
> >  	- device_type: Must be "ethernet-phy".
> >
> >  The MAC address will be determined using the optional properties
> > defined in  ethernet.txt.
> >
> > +- altr,has-supplementary-unicast:
> > +		If present, TSE supports additional unicast addresses.
> > +		Otherwise additional unicast addresses are not supported.
> > +- altr,has-hash-multicast-filter:
> > +		If present, TSE supports a hash based multicast filter.
> > +		Otherwise, hash-based multicast filtering is not supported.
> > +- altr,has-ptp:
> > +		If present, TSE supports 1588 timestamping.  Currently only
> > +		supported with the msgdma prefetcher.
> > +- altr,tx-poll-cnt:
> > +		Optional cycle count for Tx prefetcher to poll descriptor
> > +		list.  If not present, defaults to 128, which at 125MHz is
> > +		roughly 1usec. Only for "altr,tse-msgdma-2.0".
> > +- altr,rx-poll-cnt:
> > +		Optional cycle count for Tx prefetcher to poll descriptor
> > +		list.  If not present, defaults to 128, which at 125MHz is
> > +		roughly 1usec. Only for "altr,tse-msgdma-2.0".
> > +
> > +Required registers by compatibility string:
> > + - "altr,tse-1.0"
> > +	"control_port": MAC configuration space region
> > +	"tx_csr":       DMA Tx dispatcher control and status space region
> > +	"rx_csr" :      DMA Rx dispatcher control and status space region
> > +	"s1":		DMA descriptor memory
> > +
> > + - "altr,tse-msgdma-1.0"
> > +	"control_port": MAC configuration space region
> > +	"tx_csr":       DMA Tx dispatcher control and status space region
> > +	"tx_desc":      DMA Tx dispatcher descriptor space region
> > +	"rx_csr" :      DMA Rx dispatcher control and status space region
> > +	"rx_desc":      DMA Rx dispatcher descriptor space region
> > +	"rx_resp":      DMA Rx dispatcher response space region
> > +
> > + - "altr,tse-msgdma-2.0"
> > +	"control_port": MAC configuration space region
> > +	"tx_csr":       DMA Tx dispatcher control and status space region
> > +	"tx_pref":      DMA Tx prefetcher configuration space region
> > +	"rx_csr" :      DMA Rx dispatcher control and status space region
> > +	"rx_pref":      DMA Rx prefetcher configuration space region
> > +	"tod_ctrl":     Time of Day Control register only required when
> > +			timestamping support is enabled.  Timestamping is
> > +			only supported with the msgdma-2.0
> implementation.
> > +
> > +Optional properties:
> > +- local-mac-address: See ethernet.txt in the same directory.
> > +- max-frame-size: See ethernet.txt in the same directory.
> > +
> >  Example:
> >
> >  	tse_sub_0_eth_tse_0: ethernet@1,00000000 { @@ -86,6 +119,11
> @@
> > Example:
> >  				device_type =3D "ethernet-phy";
> >  			};
> >
> > +			phy2: ethernet-phy@2 {
> > +				reg =3D <0x2>;
> > +				device_type =3D "ethernet-phy";
> > +			};
> > +
> >  		};
> >  	};
> >
> > @@ -111,3 +149,30 @@ Example:
> >  		altr,has-hash-multicast-filter;
> >  		phy-handle =3D <&phy1>;
> >  	};
> > +
> > +
> > +	tse_sub_2_eth_tse_0: ethernet@1,00002000 {
>=20
> What bus is this on? Usually a ',' like this is for a chip select number.=
 If just a
> 64-bit address, then no comma.

It's a 64-bit address. I'll remove the comma for this and the one above.
>=20
> > +		compatible =3D "altr,tse-msgdma-2.0";
> > +		reg =3D 	<0x00000001 0x00002000 0x00000400>,
> > +			<0x00000001 0x00002400 0x00000020>,
> > +			<0x00000001 0x00002420 0x00000020>,
> > +			<0x00000001 0x00002440 0x00000020>,
> > +			<0x00000001 0x00002460 0x00000020>,
> > +			<0x00000001 0x00002480 0x00000040>;
> > +		reg-names =3D "control_port", "rx_csr", "rx_pref","tx_csr",
> "tx_pref", "tod_ctrl";
> > +		interrupt-parent =3D <&hps_0_arm_gic_0>;
> > +		interrupts =3D <0 45 4>, <0 44 4>;
> > +		interrupt-names =3D "rx_irq", "tx_irq";
> > +		rx-fifo-depth =3D <2048>;
> > +		tx-fifo-depth =3D <2048>;
> > +		address-bits =3D <48>;
> > +		max-frame-size =3D <1500>;
> > +		local-mac-address =3D [ 00 00 00 00 00 00 ];
> > +		phy-mode =3D "sgmii";
> > +		altr,has-supplementary-unicast;
> > +		altr,has-hash-multicast-filter;
> > +		altr,has-ptp;
> > +		altr,tx-poll-cnt =3D <128>;
> > +		altr,rx-poll-cnt =3D <32>;
> > +		phy-handle =3D <&phy2>;
> > +	};
> > --
> > 2.13.0
> >