Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 13 May 2020 14:28:19 +0200
From:   Jacopo Mondi <jacopo@jmondi.org>
To:     Rob Herring <robh@kernel.org>
Cc:     Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
        linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Kieran Bingham <kieran.bingham@ideasonboard.com>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Niklas =?utf-8?Q?S=C3=B6derlund?= <niklas.soderlund@ragnatech.se>,
        sakari.ailus@iki.fi, Hans Verkuil <hverkuil@xs4all.nl>,
        Hyun Kwon <hyunk@xilinx.com>,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
        Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
        Jacopo Mondi <jacopo+renesas@jmondi.org>,
        Niklas =?utf-8?Q?S=C3=B6derlund?= 
        <niklas.soderlund+renesas@ragnatech.se>
Subject: Re: [PATCH v9 1/4] dt-bindings: media: i2c: Add bindings for Maxim
 Integrated MAX9286
Message-ID: <20200513122819.olmg6bqhek6bmjgq@uno.localdomain>
References: <20200512155105.1068064-1-kieran.bingham+renesas@ideasonboard.com>
 <20200512155105.1068064-2-kieran.bingham+renesas@ideasonboard.com>
 <20200512223610.GB23701@bogus>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20200512223610.GB23701@bogus>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Rob,

On Tue, May 12, 2020 at 05:36:10PM -0500, Rob Herring wrote:
> On Tue, May 12, 2020 at 04:51:02PM +0100, Kieran Bingham wrote:
> > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> >
> > The MAX9286 deserializes video data received on up to 4 Gigabit
> > Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up
> > to 4 data lanes.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> >
> > ---
> >
> > v7:
> >  - Collect Rob's RB tag
> >  - Remove redundant maxItems from remote-endpoints
> >  - Fix SPDX licence tag
> >
> >  .../bindings/media/i2c/maxim,max9286.yaml     | 287 ++++++++++++++++++
> >  1 file changed, 287 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > new file mode 100644
> > index 000000000000..f9d3e5712c59
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > @@ -0,0 +1,287 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (C) 2019 Renesas Electronics Corp.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Maxim Integrated Quad GMSL Deserializer
> > +
> > +maintainers:
> > +  - Jacopo Mondi <jacopo+renesas@jmondi.org>
> > +  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > +  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > +  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > +
> > +description: |
> > +  The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia
> > +  Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data
> > +  lanes.
> > +
> > +  In addition to video data, the GMSL links carry a bidirectional control
> > +  channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic
> > +  not addressed to itself to the other side of the links, where a GMSL
> > +  serializer will output it on a local I2C bus. In the other direction all I2C
> > +  traffic received over GMSL by the MAX9286 is output on the local I2C bus.
> > +
> > +properties:
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0
> > +
> > +  compatible:
> > +    const: maxim,max9286
> > +
> > +  reg:
> > +    description: I2C device address
> > +    maxItems: 1
> > +
> > +  poc-supply:
> > +    description: Regulator providing Power over Coax to the cameras
> > +    maxItems: 1
> > +
> > +  enable-gpios:
> > +    description: GPIO connected to the \#PWDN pin with inverted polarity
> > +    maxItems: 1
> > +
> > +  ports:
> > +    type: object
> > +    description: |
> > +      The connections to the MAX9286 GMSL and its endpoint nodes are modelled
> > +      using the OF graph bindings in accordance with the video interface
> > +      bindings defined in
> > +      Documentation/devicetree/bindings/media/video-interfaces.txt.
> > +
> > +      The following table lists the port number corresponding to each device
> > +      port.
> > +
> > +        Port            Description
> > +        ----------------------------------------
> > +        Port 0          GMSL Input 0
> > +        Port 1          GMSL Input 1
> > +        Port 2          GMSL Input 2
> > +        Port 3          GMSL Input 3
> > +        Port 4          CSI-2 Output
> > +
> > +    properties:
> > +      '#address-cells':
> > +        const: 1
> > +
> > +      '#size-cells':
> > +        const: 0
> > +
> > +      port@[0-3]:
> > +        type: object
> > +        properties:
> > +          reg:
> > +            enum: [ 0, 1, 2, 3 ]
> > +
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              remote-endpoint:
> > +                description: |
> > +                 phandle to the remote GMSL source endpoint subnode in the
> > +                 remote node port.
> > +
> > +            required:
> > +              - remote-endpoint
> > +
> > +        required:
> > +          - reg
> > +          - endpoint
> > +
> > +        additionalProperties: false
> > +
> > +      port@4:
> > +        type: object
> > +        properties:
> > +          reg:
> > +            const: 4
> > +
> > +          endpoint:
> > +            type: object
> > +
> > +            properties:
> > +              remote-endpoint:
> > +                description: phandle to the remote CSI-2 sink endpoint.
> > +
> > +              data-lanes:
> > +                description: array of physical CSI-2 data lane indexes.
> > +
> > +            required:
> > +              - remote-endpoint
> > +              - data-lanes
> > +
> > +        required:
> > +          - reg
> > +          - endpoint
> > +
> > +        additionalProperties: false
> > +
> > +    required:
> > +      - port@4
> > +
> > +  i2c-mux:
> > +    type: object
> > +    description: |
> > +      Each GMSL link is modelled as a child bus of an i2c bus
> > +      multiplexer/switch, in accordance with bindings described in
> > +      Documentation/devicetree/bindings/i2c/i2c-mux.txt. The serializer
> > +      device on the remote end of the GMSL link shall be modelled as a child
> > +      node of the corresponding I2C bus.
> > +
> > +    properties:
> > +      '#address-cells':
> > +        const: 1
> > +
> > +      '#size-cells':
> > +        const: 0
> > +
> > +  additionalProperties: false
>
> Wrong indentation. Should be 2 more or this is a DT property.
>

Thanks, updating the dt tools helped spotting the error locally as
well.

This fixes the error reported in the previous email, now I get a
Documentation/devicetree/bindings/media/i2c/maxim,max9286.example.dt.yaml:
gmsl-deserializer@2c: i2c-mux: 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' do not match any of the regexes: 'pinctrl-[0-9]+'

which makes me think the i2c-mux child nodes are under-specified in
this bindings.

I have expanded them and will reply with a fixup to be applied on top
of this patch to ease review and eventually include in v10.

Thanks
  j

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - ports
> > +  - i2c-mux
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    i2c@e66d8000 {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      reg = <0 0xe66d8000 0 0x40>;
> > +
> > +      gmsl-deserializer@2c {
> > +        compatible = "maxim,max9286";
> > +        reg = <0x2c>;
> > +        poc-supply = <&camera_poc_12v>;
> > +        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
> > +
> > +        ports {
> > +          #address-cells = <1>;
> > +          #size-cells = <0>;
> > +
> > +          port@0 {
> > +            reg = <0>;
> > +
> > +            max9286_in0: endpoint {
> > +              remote-endpoint = <&rdacm20_out0>;
> > +            };
> > +          };
> > +
> > +          port@1 {
> > +            reg = <1>;
> > +
> > +            max9286_in1: endpoint {
> > +              remote-endpoint = <&rdacm20_out1>;
> > +            };
> > +          };
> > +
> > +          port@2 {
> > +            reg = <2>;
> > +
> > +            max9286_in2: endpoint {
> > +              remote-endpoint = <&rdacm20_out2>;
> > +            };
> > +          };
> > +
> > +          port@3 {
> > +            reg = <3>;
> > +
> > +            max9286_in3: endpoint {
> > +              remote-endpoint = <&rdacm20_out3>;
> > +            };
> > +          };
> > +
> > +          port@4 {
> > +            reg = <4>;
> > +
> > +            max9286_out: endpoint {
> > +              data-lanes = <1 2 3 4>;
> > +              remote-endpoint = <&csi40_in>;
> > +            };
> > +          };
> > +        };
> > +
> > +        i2c-mux {
> > +          #address-cells = <1>;
> > +          #size-cells = <0>;
> > +
> > +          i2c@0 {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            reg = <0>;
> > +
> > +            camera@51 {
> > +              reg = <0x51>;
> > +
> > +              port {
> > +                rdacm20_out0: endpoint {
> > +                  remote-endpoint = <&max9286_in0>;
> > +                };
> > +              };
> > +
> > +            };
> > +          };
> > +
> > +          i2c@1 {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +            reg = <1>;
> > +
> > +            camera@52 {
> > +              reg = <0x52>;
> > +
> > +              port {
> > +                rdacm20_out1: endpoint {
> > +                  remote-endpoint = <&max9286_in1>;
> > +                };
> > +              };
> > +            };
> > +          };
> > +
> > +          i2c@2 {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +            reg = <2>;
> > +
> > +            camera@53 {
> > +              reg = <0x53>;
> > +
> > +              port {
> > +                rdacm20_out2: endpoint {
> > +                  remote-endpoint = <&max9286_in2>;
> > +                };
> > +              };
> > +            };
> > +          };
> > +
> > +          i2c@3 {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +            reg = <3>;
> > +
> > +            camera@54 {
> > +              reg = <0x54>;
> > +
> > +              port {
> > +                rdacm20_out3: endpoint {
> > +                  remote-endpoint = <&max9286_in3>;
> > +                };
> > +              };
> > +            };
> > +          };
> > +        };
> > +      };
> > +    };
> > --
> > 2.25.1
> >