Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Anson Huang <Anson.Huang@nxp.com>
To:     robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
        kernel@pengutronix.de, festevam@gmail.com,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
Cc:     Linux-imx@nxp.com
Subject: [PATCH 1/2] ARM: dts: imx6qdl: Use nvmem interface to get fuse data
Date:   Thu, 14 May 2020 09:08:47 +0800
Message-Id: <1589418528-26410-1-git-send-email-Anson.Huang@nxp.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Although ocotp clock is always ON for i.MX6QDL, OCOTP can be
accessed directly, but since i.MX6QDL nvmem interface is supported,
and fsl,tempmon-data is deprecated, use it instead of getting fuse
data by reading ocotp directly, this makes all i.MX6 SoCs aligned.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 98da446..1763c2b 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -74,7 +74,8 @@
 		interrupt-parent = <&gpc>;
 		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,tempmon = <&anatop>;
-		fsl,tempmon-data = <&ocotp>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
 		clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 		#thermal-sensor-cells = <0>;
 	};
@@ -1171,6 +1172,14 @@
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
 			};
 
 			tzasc@21d0000 { /* TZASC1 */
-- 
2.7.4