Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: XltXjzs+GU6yt//0omU6PmdLk2jQP5ZYtU64eC6H8VCmkAjLS49NYR8MzOiI46Jnogrfof4qVt
 ehDiHryI2RxBu5y7pXRfpiQPWJBnFDpYRG92vcKXEM5JWrOcnvnC6Z4oDH+2GVYHUXcrSsiJs7
 6ECz0+hv5J7AG9MVaAUeKLhbYxDbJp7uAhFfwWiWt97uVdFLfVxnTVQmSrNqj/F76fDcOfVVI4
 mPlaJXJY/asv87Ot5dBe+1VwcJPoQn1+vYOmGxAyMTh98NkWYB14wTJ+AmSy78BM1BNP8Y6fBm
 ERY=
From:   <cristian.birsan@microchip.com>
To:     <balbi@kernel.org>, <gregkh@linuxfoundation.org>,
        <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
        <ludovic.desroches@microchip.com>, <robh+dt@kernel.org>,
        <mark.rutland@arm.com>, <linux-arm-kernel@lists.infradead.org>,
        <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
CC:     Cristian Birsan <cristian.birsan@microchip.com>
Subject: [PATCH v2 7/7] ARM: dts: at91: sam9x60ek: enable usb device
Date:   Fri, 15 May 2020 14:16:31 +0300
Message-ID: <20200515111631.31210-8-cristian.birsan@microchip.com>
In-Reply-To: <20200515111631.31210-1-cristian.birsan@microchip.com>
References: <20200515111631.31210-1-cristian.birsan@microchip.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Cristian Birsan <cristian.birsan@microchip.com>

Enable usb device for sam9x60ek board.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
---
 arch/arm/boot/dts/at91-sam9x60ek.dts | 13 +++++
 arch/arm/boot/dts/sam9x60.dtsi       | 74 ++++++++++++++++++++++++++++
 2 files changed, 87 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index b484745bf2d4..325d0fc8674f 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -547,6 +547,12 @@
 			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 		};
 	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
 }; /* pinctrl */
 
 &pmc {
@@ -634,6 +640,13 @@
 	};
 };
 
+&usb0 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
 &usb1 {
 	num-ports = <3>;
 	atmel,vbus-gpio = <0
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 6763423d64b8..5cd2b9054762 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -69,6 +69,80 @@
 		#size-cells = <1>;
 		ranges;
 
+		usb0: gadget@500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sam9x60-udc";
+			reg = <0x00500000 0x100000
+				0xf803c000 0x400>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+
+			ep@0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep@1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep@2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+			};
+
+			ep@3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep@7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+		};
+
 		usb1: ohci@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
-- 
2.17.1