Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 18 May 2020 15:42:34 -0700
From:   Bjorn Andersson <bjorn.andersson@linaro.org>
To:     Vinod Koul <vkoul@kernel.org>
Cc:     Anders Roxell <anders.roxell@linaro.org>,
        Arnd Bergmann <arnd@arndb.de>,
        Mathias Nyman <mathias.nyman@intel.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        linux-arm-msm@vger.kernel.org,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
        Christian Lamparter <chunkeey@googlemail.com>,
        John Stultz <john.stultz@linaro.org>,
        Alan Stern <stern@rowland.harvard.edu>,
        Andreas B?hler <dev@aboehler.at>, linux-usb@vger.kernel.org,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller
 with memory
Message-ID: <20200518224234.GK2165@builder.lan>
References: <20200506060025.1535960-1-vkoul@kernel.org>
 <20200506060025.1535960-4-vkoul@kernel.org>
 <CADYN=9JLeWHODRWDEcTE_6iZ3TX-E4yyx3OwqzK-H-ytLAmQUg@mail.gmail.com>
 <20200518195719.GG374218@vkoul-mobl.Dlink>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200518195719.GG374218@vkoul-mobl.Dlink>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon 18 May 12:57 PDT 2020, Vinod Koul wrote:

> Hi Anders,
> 
> On 18-05-20, 19:53, Anders Roxell wrote:
> > On Wed, 6 May 2020 at 08:01, Vinod Koul <vkoul@kernel.org> wrote:
> > >
> > > Some rensas controller like uPD720201 and uPD720202 need firmware to be
> > > loaded. Add these devices in pci table and invoke renesas firmware loader
> > > functions to check and load the firmware into device memory when
> > > required.
> > >
> > > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > 
> > Hi, I got a build error when I built an arm64 allmodconfig kernel.
> 
> Thanks for this. This is happening as we have default y for USB_XHCI_PCI
> and then we make USB_XHCI_PCI_RENESAS=m. That should be not allowed as
> we export as symbol so both can be inbuilt or modules but USB_XHCI_PCI=y
> and USB_XHCI_PCI_RENESAS=m cant. While it is valid that USB_XHCI_PCI=y|m
> and USB_XHCI_PCI_RENESAS=n
> 
> So this seems to get fixed by below for me. I have tested with
>  - both y and m (easy)
>  - make USB_XHCI_PCI_RENESAS=n, USB_XHCI_PCI=y|m works
>  - try making USB_XHCI_PCI=y and USB_XHCI_PCI_RENESAS=m, then
>    USB_XHCI_PCI=m by kbuild :)
>  - try making USB_XHCI_PCI=m and USB_XHCI_PCI_RENESAS=y, kbuild gives
>    error prompt that it will be m due to depends
> 
> Thanks to all the fixes done by Arnd which pointed me to this. Pls
> verify and I will send the fix with you as reported :)
> 
> ---- >8 ----
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index b5c542d6a1c5..92783d175b3f 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP
>  config USB_XHCI_PCI
>         tristate
>         depends on USB_PCI
> +       depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS

This correctly captures the variations you describe above.

Regards,
Bjorn

>         default y
>  
>  config USB_XHCI_PCI_RENESAS
>         tristate "Support for additional Renesas xHCI controller with firwmare"
> -       depends on USB_XHCI_PCI
>         ---help---
>           Say 'Y' to enable the support for the Renesas xHCI controller with
>           firwmare. Make sure you have the firwmare for the device and
> 
> -- 
> ~Vinod