Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751086AbWCOSv4 (ORCPT ); Wed, 15 Mar 2006 13:51:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751111AbWCOSv4 (ORCPT ); Wed, 15 Mar 2006 13:51:56 -0500 Received: from emailhub.stusta.mhn.de ([141.84.69.5]:61188 "HELO mailout.stusta.mhn.de") by vger.kernel.org with SMTP id S1751086AbWCOSvz (ORCPT ); Wed, 15 Mar 2006 13:51:55 -0500 Date: Wed, 15 Mar 2006 19:51:52 +0100 From: Adrian Bunk To: mchehab@infradead.org, mdharm-usb@one-eyed-alien.net Cc: v4l-dvb-maintainer@linuxtv.org, video4linux-list@redhat.com, usb-storage@lists.one-eyed-alien.net, linux-usb-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org Subject: 2.6.16-rc: saa7134 + usb-storage = freeze Message-ID: <20060315185152.GA4454@stusta.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.11+cvs20060126 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 26020 Lines: 541 My computer always freezes after a few minutes with the following workload: - watching TV with xawtv - backup to an external USB disk using backup2l As long as I'm not doing both at the same time there are no problems. Freeze means: - X is completely frozen - TV sound continues to be correctly played (the TV card and the internal sound chip are connected through an external cable) - the light of the USB enclosure flashes at about twice per second This problem is present in both 2.6.16-rc6-mm1 and 2.6.16-rc5 (the latter with a patch to support my saa7134 card). dmesg is below. Any hints how to find the source of this problem? TIA Adrian Linux version 2.6.16-rc6-mm1 (bunk@r063144.stusta.swh.mhn.de) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #4 Wed Mar 15 18:29:52 CET 2006 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM add_memory_region(0000000000000000, 000000000009fc00, 1) copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 add_memory_region(000000000009fc00, 0000000000000400, 2) copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 add_memory_region(00000000000f0000, 0000000000010000, 2) copy_e820_map() start: 0000000000100000 size: 000000001fefb000 end: 000000001fffb000 type: 1 copy_e820_map() type is E820_RAM add_memory_region(0000000000100000, 000000001fefb000, 1) copy_e820_map() start: 000000001fffb000 size: 0000000000004000 end: 000000001ffff000 type: 3 add_memory_region(000000001fffb000, 0000000000004000, 3) copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4 add_memory_region(000000001ffff000, 0000000000001000, 4) copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 add_memory_region(00000000fec00000, 0000000000001000, 2) copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 add_memory_region(00000000fee00000, 0000000000001000, 2) copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 add_memory_region(00000000ffff0000, 0000000000010000, 2) BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffb000 (usable) BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131067 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 126971 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f5e30 ACPI: RSDT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb000 ACPI: FADT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb0b2 ACPI: BOOT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb030 ACPI: MADT (v001 ASUS A7V600-X 0x42302e31 MSFT 0x31313031) @ 0x1fffb058 ACPI: DSDT (v001 ASUS A7V600-X 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Detected 1791.245 MHz processor. Built 1 zonelists Kernel command line: BOOT_IMAGE=l-2.6.16-rc6-m1 ro root=301 mode=1280x1024@760 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0415000 soft=c0416000 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 510156k/524268k available (2082k kernel code, 13524k reserved, 897k data, 152k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3584.94 BogoMIPS (lpj=17924710) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP 2200+ stepping 01 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060210 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled. ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Quirk-MSI-K8T Soundcard On PCI: Unexpected Value in PCI-Register: no Change! Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Setting up standard PCI resources PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: ef000000-efdfffff PREFETCH window: eff00000-f7ffffff ACPI (acpi_bus-0216): Device 'PCI1' is not power manageable [20060210] PCI: Setting latency timer of device 0000:00:01.0 to 64 Simple Boot Flag at 0x3a set to 0x1 Machine check exception polling timer started. No parameters - using defaults. 1 1 1 1 1 s 1/1 392981 438287 805326 1639961 810926 initcall at 0xc03f61a8: do_tests+0x0/0x66f(): returned with error code -55 io scheduler noop registered io scheduler cfq registered (default) 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x2000 0000:00:10.0: Performing full reset 0000:00:10.1: uhci_check_and_reset_hc: legsup = 0x2000 0000:00:10.1: Performing full reset 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x2000 0000:00:10.2: Performing full reset 0000:00:10.3: uhci_check_and_reset_hc: legsup = 0x2000 0000:00:10.3: Performing full reset PCI: Bypassing VIA 8237 APIC De-Assert Message ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=155.00 Mhz, System=155.00 MHz radeonfb: PLL min 12000 max 35000 radeonfb: Monitor 1 type DFP found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 160x64 radeonfb (0000:01:00.0): ATI Radeon QY lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.23.0 20051229 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). loop: loaded (max 8 devices) e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17 e100: eth0: e100_probe: addr 0xee800000, irq 17, MAC addr 00:03:47:4D:C1:91 Linux video capture interface: v1.00 saa7130/34: v4l2 driver version 0.2.14 loaded PCI: Enabling device 0000:00:0d.0 (0004 -> 0006) ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 16 saa7133[0]: found at 0000:00:0d.0, rev: 208, irq: 16, latency: 32, mmio: 0xed800000 saa7133[0]: subsystem: 17de:7201, board: Tevion/KWorld DVB-T 220RF [card=88,autodetected] saa7133[0]: board init: gpio is 100 saa7133[0]: i2c eeprom 00: de 17 01 72 ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 tuner 4-004b: chip found @ 0x96 (saa7133[0]) tuner 4-004b: setting tuner address to 61 tuner 4-004b: type set to tda8290+75a Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI (acpi_bus-0216): Device 'IDE0' is not power manageable [20060210] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:0f.1, from 14 to 2 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SV1604N, ATA DISK drive hdb: SAMSUNG HA250JC, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: RWD XR-RW4424, ATAPI CD/DVD-ROM drive hdd: SAMSUNG HA250JC, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdb: max request size: 512KiB hdb: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 hdd: max request size: 512KiB hdd: Host Protected Area detected. current capacity is 66055248 sectors (33820 MB) native capacity is 488397168 sectors (250059 MB) hdd: Host Protected Area disabled. hdd: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(100) hdd: cache flushes supported hdd: hdd1 hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1860kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ACPI (acpi_bus-0216): Device 'SU20' is not power manageable [20060210] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:10.4, from 0 to 3 ehci_hcd 0000:00:10.4: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: reset hcs_params 0x4208 dbg=0 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024 ehci_hcd 0000:00:10.4: MWI active ehci_hcd 0000:00:10.4: supports USB remote wakeup ehci_hcd 0000:00:10.4: irq 19, io mem 0xed000000 ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:10.4: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.16-rc6-mm1 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 usb usb1: uevent usb usb1: device is self-powered usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' USB Universal Host Controller Interface driver v3.0 ehci_hcd 0000:00:10.4: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s ACPI (acpi_bus-0216): Device 'USB0' is not power manageable [20060210] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 3 uhci_hcd 0000:00:10.0: UHCI Host Controller drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: detected 2 ports uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.0: Performing full reset uhci_hcd 0000:00:10.0: irq 19, io base 0x00009000 usb usb2: default language 0x0409 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.16-rc6-mm1 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 usb usb2: uevent usb usb2: device is self-powered usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 drivers/usb/core/inode.c: creating file '001' ACPI (acpi_bus-0216): Device 'USB1' is not power manageable [20060210] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 3 uhci_hcd 0000:00:10.1: UHCI Host Controller drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: detected 2 ports uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.1: Performing full reset uhci_hcd 0000:00:10.1: irq 19, io base 0x00008800 usb usb3: default language 0x0409 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.16-rc6-mm1 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: uevent usb usb3: device is self-powered usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good ehci_hcd 0000:00:10.4: port 3 high speed ehci_hcd 0000:00:10.4: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT usb 1-3: new high speed USB device using ehci_hcd and address 2 drivers/usb/core/inode.c: creating file '001' ACPI (acpi_bus-0216): Device 'USB2' is not power manageable [20060210] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 3 uhci_hcd 0000:00:10.2: UHCI Host Controller drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: detected 2 ports uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.2: Performing full reset uhci_hcd 0000:00:10.2: irq 19, io base 0x00008400 usb usb4: default language 0x0409 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.16-rc6-mm1 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: uevent ehci_hcd 0000:00:10.4: port 3 high speed ehci_hcd 0000:00:10.4: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT usb usb4: device is self-powered usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good usb 1-3: default language 0x0409 usb 1-3: new device found, idVendor=04b4, idProduct=6830 usb 1-3: new device strings: Mfr=56, Product=78, SerialNumber=100 usb 1-3: Product: USB2.0 Storage Device usb 1-3: Manufacturer: Cypress Semiconductor usb 1-3: SerialNumber: DEF10646E906 usb 1-3: uevent usb 1-3: device is self-powered usb 1-3: configuration #1 chosen from 1 choice usb 1-3: adding 1-3:1.0 (config #1, interface 0) usb 1-3:1.0: uevent drivers/usb/core/inode.c: creating file '002' hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.0: port 1 portsc 018a,00 hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s drivers/usb/core/inode.c: creating file '001' ACPI (acpi_bus-0216): Device 'USB3' is not power manageable [20060210] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 3 uhci_hcd 0000:00:10.3: UHCI Host Controller drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: detected 2 ports uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.3: Performing full reset uhci_hcd 0000:00:10.3: irq 19, io base 0x00008000 usb usb5: default language 0x0409 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.16-rc6-mm1 uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 usb usb5: uevent usb usb5: device is self-powered usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 uhci_hcd 0000:00:10.0: port 2 portsc 018a,00 hub 2-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s drivers/usb/core/inode.c: creating file '001' Initializing USB Mass Storage driver... hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.1: port 1 portsc 008a,00 hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 uhci_hcd 0000:00:10.1: port 2 portsc 008a,00 hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.2: port 1 portsc 018a,00 hub 4-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 uhci_hcd 0000:00:10.2: port 2 portsc 018a,00 hub 4-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:10.3: port 1 portsc 018a,00 hub 5-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s usb-storage 1-3:1.0: usb_probe_interface usb-storage 1-3:1.0: usb_probe_interface - got id scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300 uhci_hcd 0000:00:10.3: port 2 portsc 018a,00 hub 5-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s uhci_hcd 0000:00:10.0: suspend_rh (auto-stop) hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x300 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 usbcore: registered new driver usb-storage USB Mass Storage support registered. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver it87: Found IT8712F chip at 0x290, revision 5 Advanced Linux Sound Architecture Driver Version 1.0.11rc3 (Thu Feb 02 07:50:46 2006 UTC). ACPI (acpi_bus-0216): Device 'AC97' is not power manageable [20060210] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 4 input: AT Translated Set 2 keyboard as /class/input/input0 PCI: Setting latency timer of device 0000:00:11.5 to 64 uhci_hcd 0000:00:10.1: suspend_rh (auto-stop) codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] ALSA device list: #0: VIA 8237 with AD1888 at 0xe000, irq 20 NET: Registered protocol family 2 uhci_hcd 0000:00:10.2: suspend_rh (auto-stop) IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 7, 655360 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered ip_conntrack version 2.4 (4095 buckets, 32760 max) - 172 bytes per conntrack input: ImPS/2 Generic Wheel Mouse as /class/input/input1 uhci_hcd 0000:00:10.3: suspend_rh (auto-stop) ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 152k freed Time: tsc clocksource has been installed. Adding 1004052k swap on /dev/hda2. Priority:-1 extents:1 across:1004052k Vendor: SAMSUNG Model: SV1604N Rev: 0000 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 27 00 00 00 sda: assuming drive cache: write through SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 27 00 00 00 sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi disk sda usb-storage: device scan complete e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000 mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000 mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x4000000 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on old memory map [drm] writeback test succeeded in 1 usecs - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/