Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH] sdhci: tegra: Avoid reading autocal timeout values when
 not applicable
To:     Sowjanya Komatineni <skomatineni@nvidia.com>,
        adrian.hunter@intel.com, ulf.hansson@linaro.org,
        thierry.reding@gmail.com, jonathanh@nvidia.com
Cc:     linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-mmc@vger.kernel.org
References: <1590005337-1087-1-git-send-email-skomatineni@nvidia.com>
From:   Dmitry Osipenko <digetx@gmail.com>
Message-ID: <45c290f9-e276-53be-a7a6-23bf81f50bc3@gmail.com>
Date:   Thu, 21 May 2020 15:40:31 +0300
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.7.0
MIME-Version: 1.0
In-Reply-To: <1590005337-1087-1-git-send-email-skomatineni@nvidia.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

20.05.2020 23:08, Sowjanya Komatineni пишет:
> When auto calibration timeouts, calibration is disabled and fail-safe
> drive strength values are programmed based on the signal voltage.
> 
> Different fail-safe drive strength values based on voltage are
> applicable only for SoCs supporting 3V3 and 1V8 pad controls.
> 
> So, this patch avoids reading these properties from the device tree
> for SoCs not using pad controls and the warning of missing properties
> will not show up on these SoC platforms.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  drivers/mmc/host/sdhci-tegra.c | 57 ++++++++++++++++++++++++------------------
>  1 file changed, 33 insertions(+), 24 deletions(-)

Hello Sowjanya,

Thank you for the patch.

Tested-by: Dmitry Osipenko <digetx@gmail.com>