Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates
 149.199.60.83 as permitted sender) receiver=protection.outlook.com;
 client-ip=149.199.60.83; helo=xsj-pvapsmtpgw01;
Subject: Re: [PATCH v2] i2c: cadence: Add an error handling for
 platform_get_irq()
To:     Dejin Zheng <zhengdejin5@gmail.com>, michal.simek@xilinx.com,
        wsa@the-dreams.de, harinik@xilinx.com, soren.brinkmann@xilinx.com,
        linux-i2c@vger.kernel.org
Cc:     linux-kernel@vger.kernel.org
References: <20200520144821.8069-1-zhengdejin5@gmail.com>
From:   Michal Simek <michal.simek@xilinx.com>
Message-ID: <2d99f043-f854-8975-86ee-2f0ba1382275@xilinx.com>
Date:   Fri, 22 May 2020 13:24:57 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.7.0
MIME-Version: 1.0
In-Reply-To: <20200520144821.8069-1-zhengdejin5@gmail.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 22 May 2020 11:25:03.3446
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 50ca25e3-7031-4ff1-2363-08d7fe42c5a7
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.60.83];Helo=[xsj-pvapsmtpgw01]
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BYAPR02MB4312
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On 20. 05. 20 16:48, Dejin Zheng wrote:
> The driver initialization should be end immediately after found
> the platform_get_irq() function return an error.
> 
> Fixes: df8eb5691c48d3b0 ("i2c: Add driver for Cadence I2C controller")

I wouldn't really consider this as bug. Driver is likely not failing
when irq is not defined. It should just fail later on when
devm_request_irq is called.
Or is there any other issue with it?

> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
> ---
> v1 -> v2:
> 	- add Fixes tag.
> 
>  drivers/i2c/busses/i2c-cadence.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
> index 89d58f7d2a25..0e8debe32cea 100644
> --- a/drivers/i2c/busses/i2c-cadence.c
> +++ b/drivers/i2c/busses/i2c-cadence.c
> @@ -912,6 +912,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
>  		return PTR_ERR(id->membase);
>  
>  	id->irq = platform_get_irq(pdev, 0);
> +	if (id->irq < 0)
> +		return id->irq;
>  
>  	id->adap.owner = THIS_MODULE;
>  	id->adap.dev.of_node = pdev->dev.of_node;
> 

The change is valid but the question is if make sense to do it in this
way. Some drivers are using devm_request_irq to do do job.

For example:
 	id->irq = platform_get_irq(pdev, 0);
        ret = devm_request_irq(&pdev->dev, id->irq, cdns_i2c_isr, 0,
                                  DRIVER_NAME, id);
        if (ret)
		return ret;

But I am also fine with solution above where you fail in quickest way.

Without that Fixed tag
Acked-by: Michal Simek <michal.simek@xilinx.com>

Thanks,
Michal