Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: vIum7ldppE2n7O0qXiHPTnJzTQXWSpAf4FB1k3+4f/bmbKyd2mefokXU60mxFpti1e0Q5RQ9CB
 GsEu4vBMdctg==
IronPort-SDR: gdNOhWPiD26Qwsk/8U/6trhMNaOkd6iMPsw+64KEMYwuMKrff1ja/OqQ3CbSLJRswf4BsofcDC
 tkglDYyxrfwg==
Date:   Fri, 22 May 2020 15:32:48 +0300
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Tali Perry <tali.perry1@gmail.com>
Cc:     ofery@google.com, brendanhiggins@google.com,
        avifishman70@gmail.com, tmaimon77@gmail.com, kfting@nuvoton.com,
        venture@google.com, yuenn@google.com, benjaminfair@google.com,
        robh+dt@kernel.org, wsa@the-dreams.de,
        linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
        openbmc@lists.ozlabs.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v13 3/3] i2c: npcm7xx: Add support for slave mode for
 Nuvoton
Message-ID: <20200522123248.GC1634618@smile.fi.intel.com>
References: <20200522113312.181413-1-tali.perry1@gmail.com>
 <20200522113312.181413-4-tali.perry1@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200522113312.181413-4-tali.perry1@gmail.com>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, May 22, 2020 at 02:33:12PM +0300, Tali Perry wrote:
> Add support for slave mode for Nuvoton
> NPCM BMC I2C controller driver.

I guess it will require v14, so, few nits below.

...

> +const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
> +					    NPCM_I2CADDR1, NPCM_I2CADDR2,
> +					    NPCM_I2CADDR3, NPCM_I2CADDR4,
> +					    NPCM_I2CADDR5, NPCM_I2CADDR6,
> +					    NPCM_I2CADDR7, NPCM_I2CADDR8,
> +					    NPCM_I2CADDR9, NPCM_I2CADDR10,

One TAB is enough.

> +					   };

No need to indent at all.

...

> +	/* Set and enable the address */
> +	iowrite8(sa_reg, bus->reg + npcm_i2caddr[(int)addr_type]);

I'm wondering why you need a casting here.

-- 
With Best Regards,
Andy Shevchenko