Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Andrey Konovalov <andrey.konovalov@linaro.org>
To:     mchehab@kernel.org, sakari.ailus@iki.fi,
        manivannan.sadhasivam@linaro.org
Cc:     linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        c.barrett@framos.com, a.brela@framos.com, peter.griffin@linaro.org,
        Andrey Konovalov <andrey.konovalov@linaro.org>
Subject: [PATCH v3 01/10] media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
Date:   Sun, 24 May 2020 22:24:56 +0300
Message-Id: <20200524192505.20682-2-andrey.konovalov@linaro.org>
In-Reply-To: <20200524192505.20682-1-andrey.konovalov@linaro.org>
References: <20200524192505.20682-1-andrey.konovalov@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

With the current driver 'media-ctl -p' issued right after the imx290 driver
is loaded prints:
pad0: Source
             [fmt:unknown/0x0]

The format value of zero is due to the current_format field of the imx290
struct not being initialized yet.

As imx290_entity_init_cfg() calls imx290_set_fmt(), the current_mode field
is also initialized, so the line which set current_mode to a default value
in driver's probe() function is no longer needed.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/media/i2c/imx290.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index f7678e5a5d87..2d8c38ffe2f0 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -722,9 +722,6 @@ static int imx290_probe(struct i2c_client *client)
 		goto free_err;
 	}
 
-	/* Set default mode to max resolution */
-	imx290->current_mode = &imx290_modes[0];
-
 	/* get system clock (xclk) */
 	imx290->xclk = devm_clk_get(dev, "xclk");
 	if (IS_ERR(imx290->xclk)) {
@@ -809,6 +806,9 @@ static int imx290_probe(struct i2c_client *client)
 		goto free_ctrl;
 	}
 
+	/* Initialize the frame format (this also sets imx290->current_mode) */
+	imx290_entity_init_cfg(&imx290->sd, NULL);
+
 	ret = v4l2_async_register_subdev(&imx290->sd);
 	if (ret < 0) {
 		dev_err(dev, "Could not register v4l2 device\n");
-- 
2.17.1