Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752528AbWCQGBs (ORCPT ); Fri, 17 Mar 2006 01:01:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752531AbWCQGBr (ORCPT ); Fri, 17 Mar 2006 01:01:47 -0500 Received: from pproxy.gmail.com ([64.233.166.181]:59831 "EHLO pproxy.gmail.com") by vger.kernel.org with ESMTP id S1752528AbWCQGBq convert rfc822-to-8bit (ORCPT ); Fri, 17 Mar 2006 01:01:46 -0500 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=KEcGZGMq8m/2fJKhyH9wwUu4SY5ybggaKrVjHoEbcjVlJ+hiPHYQA2/gupp6e/Qm0GpHpN0VbemAr/O+sug7fHw7q/2+EsYwUkoAz2C0q7dJ+lbJgpsh1PbrrmMwVPOPARArtKHROcHyDgisv4OWF5NPBvYhXfr/WvC0lM4DVAM= Message-ID: <93564eb70603162201l856be5al@mail.gmail.com> Date: Fri, 17 Mar 2006 15:01:45 +0900 From: "Samuel Masham" To: "Mauro Tassinari" Subject: Re: libata/sata errors on ich[?]/maxtor Cc: linux-kernel@vger.kernel.org In-Reply-To: <93564eb70603162037g1856b7eey@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Content-Disposition: inline References: <93564eb70603162037g1856b7eey@mail.gmail.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23494 Lines: 533 On 17/03/06, Samuel Masham wrote: > Hi Mauro, All, > > On 17/03/06, Mauro Tassinari wrote: > > The following hw combination appears to be broken, up to 2.6.16-rc6, > > hanging after giving the usual bunch of repeated messages whenever a > > moderate > > i/o load is started, in this case a sda (hitachi) to sdb (maxtor) cpio. > > > > .... snip .... > > > > ata2: command 0x35 timeout, stat 0xd0 host_stat 0x21 > > ata2: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 > > ata2: status=0xd0 { Busy } > > sd 1:0:0:0: SCSI error: return code = 0x8000002 > > sdb: Current: sense key: Aborted Command > > Additional sense: Scsi parity error > > end_request: I/O error, dev sdb, sector 308678943 > > ATA: abnormal status 0xD0 on port 0xEFA7 > > ATA: abnormal status 0xD0 on port 0xEFA7 > > ATA: abnormal status 0xD0 on port 0xEFA7 > > > > .... snip .... > > Unfortualy I can reproduce this at will just by trying to mkfs -t ext3 > on one of the box's second drive. > > A couple of weeks ago we added a second hardisk to our Dell 750's > > I wasn't going to post the issue to LKML as it in our case it should > be a redhat problem but if you are seeing the same thing they may be > some value in adding my information here... I will be adding this to > redhats bugzilla ... soon ;) see: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=185724 > What seems to happen is that mkfs will try and write to the drive > using the normal > > (From strace) > > _llseek(3, 72613699584, [72613699584], SEEK_SET) = 0 > write(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 32768 > > but this write then "never" returns... > > from the echo t > /proc/sysrq-trigger output > > mkfs.ext3 R F6EA8000 3872 22820 22819 (NOTLB) > Call Trace: [] schedule_timeout [kernel] 0x65 (0xd5233cd4) > [] process_timeout [kernel] 0x0 (0xd5233cf4) > [] io_schedule_timeout [kernel] 0x2d (0xd5233d0c) > [] __get_request_wait [kernel] 0xfa (0xd5233d18) > [] __make_request [kernel] 0x15c (0xd5233d74) > [] generic_make_request [kernel] 0xea (0xd5233dd0) > [] submit_bh_rsector [kernel] 0x49 (0xd5233df8) > [] write_locked_buffers [kernel] 0x3b (0xd5233e14) > [] write_some_buffers [kernel] 0x160 (0xd5233e28) > [] balance_dirty [kernel] 0x34 (0xd5233ecc) > [] __block_commit_write [kernel] 0x84 (0xd5233ed8) > [] block_commit_write [kernel] 0x2d (0xd5233ef4) > [] do_generic_file_write [kernel] 0x235 (0xd5233f0c) > [] generic_file_write [kernel] 0x18f (0xd5233f60) > [] sys_write [kernel] 0x97 (0xd5233f94) > [] syscall_trace_enter [kernel] 0x59 (0xd5233fac) > [] no_timing2 [kernel] 0x7 (0xd5233fc0) > [] clip_pop [kernel] 0x5b (0xd5233fe0) > > The value of R varies with it sometime being 00000001 or a number > like F6758000 > > As you can see from the printk's here this error continues and the for > every access (write?) to the drive you just have to wait for a > timeout. > > ata1: command 0x35 timeout, stat 0xd1 host_stat 0x61 > ata1: translated ATA stat/err 0xd1/00 to SCSI SK/ASC/ASCQ 0xb/47/00 > ata1: status=0xd1 { Busy } > SCSI disk error : host 0 channel 0 id 1 lun 0 return code = 8000002 > Current sd08:12: sense key Aborted Command > Additional sense indicates Scsi parity error > I/O error: dev 08:12, sector 89391226 > ATA: abnormal status 0xD1 on port 0x177 > ATA: abnormal status 0xD1 on port 0x177 > ATA: abnormal status 0xD1 on port 0x177 > ata1: command 0x35 timeout, stat 0xd1 host_stat 0x61 > ata1: translated ATA stat/err 0xd1/00 to SCSI SK/ASC/ASCQ 0xb/47/00 > ata1: status=0xd1 { Busy } > SCSI disk error : host 0 channel 0 id 1 lun 0 return code = 8000002 > Current sd08:12: sense key Aborted Command > Additional sense indicates Scsi parity error > I/O error: dev 08:12, sector 89391228 > ATA: abnormal status 0xD1 on port 0x177 > ATA: abnormal status 0xD1 on port 0x177 > ATA: abnormal status 0xD1 on port 0x177 > > For us this also seems to be blocking the access to the other drive? > so we are left with a effectively dead box.... > > We have seen this effect on 3 of the 10 boxes so far (with different > triggers) but it is 100% repeatable on this one box this way. > > It looks to me like ether we should be clearing an error status after > we have got it or the drive should clear it automatically but it > clearly isn't. As such all subsequent accesses just timeout repeating > the already seen error... > > Obviously this last paragraph is random wild speculation on my part :) > > Anyone got a handle on this one? > > Samuel > > ps we cant upgrade to the latest and greatest (ie anything other than > rhel3) on these boxes but if we are showing the same symptoms then > maybe it is useful... and we have a great test case here for any > fixes... > > > > > The behaviour is repetitive and does not depend on hw. > > Different tests were run on different disks and platforms. > > Hitachi to hitachi gave no errors. > > > > Some details follow > > > > Regards > > > > Mauro Tassinari > > > > > > > > > > root@test:~# /usr/src/linux/scripts/ver_linux > > If some fields are empty or look unusual you may have an old version. > > Compare to the current minimal requirements in Documentation/Changes. > > > > Linux test 2.6.16-rc6-abi-sata #3 PREEMPT Thu Mar 16 18:59:20 Local time > > zone must be set--see i686 pentium4 i386 GNU/Linux > > > > Gnu C 3.4.6 > > Gnu make 3.80 > > binutils 2.15.92.0.2 > > util-linux 2.12r > > mount 2.12r > > module-init-tools 3.1 > > e2fsprogs 1.38 > > jfsutils 1.1.8 > > reiserfsprogs 3.6.19 > > reiser4progs line > > xfsprogs 2.7.11 > > pcmcia-cs 3.2.8 > > quota-tools 3.12. > > PPP 2.4.4b1 > > nfs-utils 1.0.7 > > Linux C Library 2.3.6 > > Dynamic linker (ldd) 2.3.6 > > Linux C++ Library 6.0.3 > > Procps 3.2.6 > > Net-tools 1.60 > > Kbd 1.12 > > Sh-utils 5.94 > > udev 064 > > Modules Loaded binfmt_aout binfmt_xout binfmt_coff abi_wyse > > abi_solaris abi_sco abi_uw7 abi_ibcs abi_cxenix abi_svr4 lcall > > 7 abi_util snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss > > snd_mixer_oss nfsd exportfs lockd sunrpc ipv6 ohci_hcd > > pcspkr intel_agp pl2303 usbserial shpchp pci_hotplug uhci_hcd ehci_hcd > > usbcore i8xx_tco ahci i2c_i801 i2c_core sky2 pci200syn hdl > > c syncppp com20020_pci com20020 arcnet snd_ens1371 gameport snd_rawmidi > > snd_seq_device snd_ac97_codec snd_ac97_bus snd_pcm snd_tim > > er snd soundcore snd_page_alloc pcmcia firmware_class yenta_socket > > rsrc_nonstatic pcmcia_core tsdev lp parport_pc parport psmouse > > > > root@test:~# hdparm -I /dev/sdb > > > > /dev/sdb: > > > > ATA device, with non-removable media > > Model Number: Maxtor 6L160M0 > > Serial Number: L39VAZ4G > > Firmware Revision: BACE1G20 > > Standards: > > Used: ATA/ATAPI-7 T13 1532D revision 0 > > Supported: 7 6 5 4 > > Configuration: > > Logical max current > > cylinders 16383 16383 > > heads 16 16 > > sectors/track 63 63 > > -- > > CHS current addressable sectors: 16514064 > > LBA user addressable sectors: 268435455 > > LBA48 user addressable sectors: 320173056 > > device size with M = 1024*1024: 156334 MBytes > > device size with M = 1000*1000: 163928 MBytes (163 GB) > > Capabilities: > > LBA, IORDY(can be disabled) > > Queue depth: 32 > > Standby timer values: spec'd by Standard, no device specific minimum > > R/W multiple sector transfer: Max = 16 Current = 16 > > Advanced power management level: unknown setting (0x0000) > > Recommended acoustic management value: 192, current value: 254 > > DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 > > Cycle time: min=120ns recommended=120ns > > PIO: pio0 pio1 pio2 pio3 pio4 > > Cycle time: no flow control=120ns IORDY flow control=120ns > > Cycle time: no flow control=120ns IORDY flow control=120ns > > Commands/features: > > Enabled Supported: > > * SMART feature set > > Security Mode feature set > > * Power Management feature set > > * Write cache > > * Look-ahead > > * Host Protected Area feature set > > * WRITE_VERIFY command > > * WRITE_BUFFER command > > * READ_BUFFER command > > * NOP cmd > > * DOWNLOAD_MICROCODE > > Advanced Power Management feature set > > SET_MAX security extension > > * Automatic Acoustic Management feature set > > * 48-bit Address feature set > > * Device Configuration Overlay feature set > > * Mandatory FLUSH_CACHE > > * FLUSH_CACHE_EXT > > * SMART error logging > > * SMART self-test > > Media Card Pass-Through > > * General Purpose Logging feature set > > * WRITE_{DMA|MULTIPLE}_FUA_EXT > > * URG for READ_STREAM[_DMA]_EXT > > * URG for WRITE_STREAM[_DMA]_EXT > > * SATA-I signaling speed (1.5Gb/s) > > * Native Command Queueing (NCQ) > > Software settings preservation > > Security: > > Master password revision code = 65534 > > supported > > not enabled > > not locked > > not frozen > > not expired: security count > > not supported: enhanced erase > > Checksum: correct > > > > > > 1^ platform > > > > root@test:~# lspci -v > > 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub > > Interface (rev 02) > > Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard > > Flags: bus master, fast devsel, latency 0 > > Memory at f8000000 (32-bit, prefetchable) [size=64M] > > Capabilities: [e4] #09 [2106] > > Capabilities: [a0] AGP version 3.0 > > > > 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev > > 02) (prog-if 00 [Normal decode]) > > Flags: bus master, 66Mhz, fast devsel, latency 64 > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > > Memory behind bridge: fc900000-fe9fffff > > Prefetchable memory behind bridge: e7f00000-f7efffff > > > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 > > [Normal decode]) > > Flags: bus master, fast devsel, latency 0 > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 > > I/O behind bridge: 0000d000-0000dfff > > Memory behind bridge: fea00000-feafffff > > > > 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface > > Bridge (rev 02) > > Flags: bus master, medium devsel, latency 0 > > > > 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE > > Controller (rev 02) (prog-if 8a [Master SecP PriP]) > > Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard > > Flags: bus master, medium devsel, latency 0, IRQ 16 > > I/O ports at > > I/O ports at > > I/O ports at > > I/O ports at > > I/O ports at fc00 [size=16] > > Memory at 30000000 (32-bit, non-prefetchable) [size=1K] > > > > 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev > > 02) (prog-if 8f [Master SecP SecO PriP PriO]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 16 > > I/O ports at efe0 [size=8] > > I/O ports at efac [size=4] > > I/O ports at efa0 [size=8] > > I/O ports at efa8 [size=4] > > I/O ports at ef90 [size=16] > > > > 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller > > (rev 02) > > Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard > > Flags: medium devsel, IRQ 11 > > I/O ports at 0400 [size=32] > > > > 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER > > (ICH5/ICH5R) AC'97 Audio Controller (rev 02) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 812a > > Flags: bus master, medium devsel, latency 0, IRQ 20 > > I/O ports at e800 [size=256] > > I/O ports at ef00 [size=64] > > Memory at febfb800 (32-bit, non-prefetchable) [size=512] > > Memory at febfb400 (32-bit, non-prefetchable) [size=256] > > Capabilities: [50] Power Management version 2 > > > > 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 > > AGP 8x] (rev c1) (prog-if 00 [VGA]) > > Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 19 > > Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > > Memory at e8000000 (32-bit, prefetchable) [size=128M] > > Expansion ROM at fe9e0000 [disabled] [size=128K] > > Capabilities: [60] Power Management version 2 > > Capabilities: [44] AGP version 3.0 > > > > 02:04.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak > > 378/SATA 378) (rev 02) > > Subsystem: ASUSTeK Computer Inc. K8V Deluxe/PC-DL Deluxe motherboard > > Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 18 > > I/O ports at df00 [size=64] > > I/O ports at dfa0 [size=16] > > I/O ports at dc00 [size=128] > > Memory at feaff000 (32-bit, non-prefetchable) [size=4K] > > Memory at feac0000 (32-bit, non-prefetchable) [size=128K] > > Capabilities: [60] Power Management version 2 > > > > 02:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > Subsystem: Realtek Semiconductor Co., Ltd. RT8139 > > Flags: bus master, medium devsel, latency 64, IRQ 18 > > I/O ports at d800 [size=256] > > Memory at feafec00 (32-bit, non-prefetchable) [size=256] > > Capabilities: [50] Power Management version 2 > > > > 02:0c.0 Communication controller: PLX Technology, Inc. PCI <-> IOBus Bridge > > (rev 01) > > Subsystem: PLX Technology, Inc.: Unknown device 1584 > > Flags: medium devsel, IRQ 17 > > I/O ports at d480 [size=128] > > I/O ports at df80 [size=32] > > I/O ports at dfe0 [size=8] > > > > > > > > 2^ platform > > > > root@test:/var/lspci -v > > 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to > > I/O Controller (rev 04) > > Subsystem: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O > > Controller > > Flags: bus master, fast devsel, latency 0 > > Capabilities: [e0] #09 [2109] > > > > 00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI Express Root > > Port (rev 04) (prog-if 00 [Normal decode]) > > Flags: bus master, fast devsel, latency 0 > > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > > I/O behind bridge: 0000e000-0000efff > > Memory behind bridge: d7f00000-d7ffffff > > Prefetchable memory behind bridge: d8000000-dfffffff > > Capabilities: [88] #0d [0000] > > Capabilities: [80] Power Management version 2 > > Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 > > Enable- > > Capabilities: [a0] #10 [0141] > > > > 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > > PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) > > Flags: bus master, fast devsel, latency 0 > > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > > I/O behind bridge: 0000d000-0000dfff > > Capabilities: [40] #10 [0141] > > Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 > > Enable- > > Capabilities: [90] #0d [0000] > > Capabilities: [a0] Power Management version 2 > > > > 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > > PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode]) > > Flags: bus master, fast devsel, latency 0 > > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > > I/O behind bridge: 0000c000-0000cfff > > Memory behind bridge: d7e00000-d7efffff > > Capabilities: [40] #10 [0141] > > Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 > > Enable- > > Capabilities: [90] #0d [0000] > > Capabilities: [a0] Power Management version 2 > > > > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: bus master, medium devsel, latency 0, IRQ 22 > > I/O ports at 9880 [size=32] > > > > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: bus master, medium devsel, latency 0, IRQ 19 > > I/O ports at 9c00 [size=32] > > > > 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: bus master, medium devsel, latency 0, IRQ 18 > > I/O ports at a000 [size=32] > > > > 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: bus master, medium devsel, latency 0, IRQ 16 > > I/O ports at a080 [size=32] > > > > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > > Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: bus master, medium devsel, latency 0, IRQ 22 > > Memory at d7dff800 (32-bit, non-prefetchable) [size=1K] > > Capabilities: [50] Power Management version 2 > > Capabilities: [58] #0a [20a0] > > > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) (prog-if 01 > > [Subtractive decode]) > > Flags: bus master, fast devsel, latency 0 > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > > I/O behind bridge: 0000b000-0000bfff > > Capabilities: [50] #0d [0000] > > > > 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface > > Bridge (rev 03) > > Flags: bus master, medium devsel, latency 0 > > > > 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > > IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: bus master, medium devsel, latency 0, IRQ 18 > > I/O ports at > > I/O ports at > > I/O ports at > > I/O ports at > > I/O ports at ffa0 [size=16] > > > > 00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA > > Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 2601 > > Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19 > > I/O ports at ac00 [size=8] > > I/O ports at a880 [size=4] > > I/O ports at a800 [size=8] > > I/O ports at a480 [size=4] > > I/O ports at a400 [size=16] > > Memory at d7dffc00 (32-bit, non-prefetchable) [size=1K] > > Capabilities: [70] Power Management version 2 > > > > 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus > > Controller (rev 03) > > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6 > > Flags: medium devsel > > I/O ports at 0400 [size=32] > > > > 01:0a.0 Communication controller: PLX Technology, Inc. PCI <-> IOBus Bridge > > (rev 01) > > Subsystem: PLX Technology, Inc.: Unknown device 1588 > > Flags: medium devsel, IRQ 21 > > I/O ports at b880 [size=128] > > I/O ports at b800 [size=64] > > I/O ports at b480 [size=8] > > > > 01:0b.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) > > Subsystem: Ensoniq Creative Sound Blaster AudioPCI128 > > Flags: bus master, slow devsel, latency 64, IRQ 20 > > I/O ports at bc00 [size=64] > > Capabilities: [dc] Power Management version 1 > > > > 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit > > Ethernet Controller (rev 15) > > Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet > > Controller (Asus) > > Flags: bus master, fast devsel, latency 0, IRQ 17 > > Memory at d7efc000 (64-bit, non-prefetchable) [size=16K] > > I/O ports at c800 [size=256] > > Expansion ROM at d7ec0000 [disabled] [size=128K] > > Capabilities: [48] Power Management version 2 > > Capabilities: [50] Vital Product Data > > Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 > > Enable- > > Capabilities: [e0] #10 [0011] > > > > 04:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon > > X300 (PCIE)] (prog-if 00 [VGA]) > > Subsystem: ASUSTeK Computer Inc. Extreme AX300SE-X > > Flags: bus master, fast devsel, latency 0 > > Memory at d8000000 (32-bit, prefetchable) [size=128M] > > I/O ports at e000 [size=256] > > Memory at d7fe0000 (32-bit, non-prefetchable) [size=64K] > > Expansion ROM at d7fc0000 [disabled] [size=128K] > > Capabilities: [50] Power Management version 2 > > Capabilities: [58] #10 [0001] > > Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 > > Enable- > > > > 04:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] > > Subsystem: ASUSTeK Computer Inc.: Unknown device 002b > > Flags: bus master, fast devsel, latency 0 > > Memory at d7ff0000 (32-bit, non-prefetchable) [size=64K] > > Capabilities: [50] Power Management version 2 > > Capabilities: [58] #10 [0001] > > > > > > > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/