Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH] arm64: dts: ls1028a: add one more thermal zone support
To:     Yuantian Tang <andy.tang@nxp.com>, shawnguo@kernel.org,
        robh+dt@kernel.org, mark.rutland@arm.com, catalin.marinas@arm.com,
        will.deacon@arm.com
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
References: <20200525073827.13272-1-andy.tang@nxp.com>
From:   Daniel Lezcano <daniel.lezcano@linaro.org>
Message-ID: <bdfd7018-aed8-ddbe-8bd2-2fa834013218@linaro.org>
Date:   Mon, 25 May 2020 13:08:06 +0200
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.7.0
MIME-Version: 1.0
In-Reply-To: <20200525073827.13272-1-andy.tang@nxp.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 25/05/2020 09:38, Yuantian Tang wrote:
> There are 2 thermal zones in ls1028a soc. Current dts only
> includes one. This patch adds the other thermal zone node
> in dts to enable it.

For my personal information, is there a cooling device for the DDR?

> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
>  .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 22 ++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 055f114cf848..bc6f0c0f85da 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -129,11 +129,31 @@
>  	};
>  
>  	thermal-zones {
> -		core-cluster {
> +		ddr-controller {
>  			polling-delay-passive = <1000>;
>  			polling-delay = <5000>;
>  			thermal-sensors = <&tmu 0>;
>  
> +			trips {
> +				ddr-ctrler-alert {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				ddr-ctrler-crit {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		core-cluster {
> +			polling-delay-passive = <1000>;
> +			polling-delay = <5000>;
> +			thermal-sensors = <&tmu 1>;
> +
>  			trips {
>  				core_cluster_alert: core-cluster-alert {
>  					temperature = <85000>;
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog