Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Jonathan Albrieux <jonathan.albrieux@gmail.com>
To:     linux-kernel@vger.kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht,
        Jonathan Albrieux <jonathan.albrieux@gmail.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), Hartmut Knaack <knaack.h@gmx.de>,
        Jonathan Cameron <Jonathan.Cameron@huawei.com>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Linus Walleij <linus.walleij@linaro.org>,
        linux-iio@vger.kernel.org (open list:IIO SUBSYSTEM AND DRIVERS),
        Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
        Jonathan Cameron <jic23@kernel.org>,
        Rob Herring <robh+dt@kernel.org>
Subject: [PATCH v6 3/5] dt-bindings: iio: magnetometer: ak8975: add gpio reset support
Date:   Mon, 25 May 2020 17:10:37 +0200
Message-Id: <20200525151117.32540-4-jonathan.albrieux@gmail.com>
In-Reply-To: <20200525151117.32540-1-jonathan.albrieux@gmail.com>
References: <20200525151117.32540-1-jonathan.albrieux@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add reset-gpio support.

Without reset's deassertion during ak8975_power_on(), driver's probe fails
on ak8975_who_i_am() while checking for device identity for AK09911 chip.

AK09911 has an active low reset gpio to handle register's reset.
AK09911 datasheet says that, if not used, reset pin should be connected
to VID. This patch emulates this situation.

Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
---
 .../bindings/iio/magnetometer/asahi-kasei,ak8975.yaml      | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
index a603659d5fa5..04b895c7143c 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -48,6 +48,11 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
+  reset-gpios:
+    description: |
+      an optional pin needed for AK09911 to set the reset state. This should
+      be usually active low
+
 required:
   - compatible
   - reg
@@ -55,6 +60,7 @@ required:
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -65,6 +71,7 @@ examples:
             interrupt-parent = <&gpio6>;
             interrupts = <15 IRQ_TYPE_EDGE_RISING>;
             vdd-supply = <&ldo_3v3_gnss>;
+            reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
             mount-matrix = "-0.984807753012208",  /* x0 */
                            "0",                   /* y0 */
                            "-0.173648177666930",  /* z0 */
-- 
2.17.1