Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Michael Walle <michael@walle.cc>
To:     linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Cc:     Linus Walleij <linus.walleij@linaro.org>,
        Bartosz Golaszewski <bgolaszewski@baylibre.com>,
        Mark Brown <broonie@kernel.org>,
        Pierre-Louis Bossart <pierre-louis.bossart@intel.com>,
        Michael Walle <michael@walle.cc>
Subject: [PATCH v4 0/2] gpio: generic regmap implementation
Date:   Mon, 25 May 2020 18:07:39 +0200
Message-Id: <20200525160741.21729-1-michael@walle.cc>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This series is a split off of the sl28cpld series:
https://lore.kernel.org/linux-gpio/20200423174543.17161-1-michael@walle.cc/

I wasn't sure if I should also include the gpiochip_irqchip_add_domain()
patch here. So feel free to skip it. OTOH if you use interrupts with
gpio-regmap it is quite handy.

For an actual user see the patch 11/16 ("gpio: add support for the sl28cpld
GPIO controller") of the series above.

Changes since v3:
 - set reg_dat_base, that was actually broken
 - fix typo
 - fix swapped reg_in_dir/reg_out_dir documentation
 - use "goto err" in error path in gpio_regmap_register()

Changes since v2:
 See changelog in the former patch series.

Michael Walle (2):
  gpiolib: Introduce gpiochip_irqchip_add_domain()
  gpio: add a reusable generic gpio_chip using regmap

 drivers/gpio/Kconfig        |   4 +
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/gpio-regmap.c  | 343 ++++++++++++++++++++++++++++++++++++
 drivers/gpio/gpiolib.c      |  20 +++
 include/linux/gpio-regmap.h |  69 ++++++++
 include/linux/gpio/driver.h |   3 +
 6 files changed, 440 insertions(+)
 create mode 100644 drivers/gpio/gpio-regmap.c
 create mode 100644 include/linux/gpio-regmap.h

-- 
2.20.1