Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Heiner Kallweit <hkallweit1@gmail.com>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>,
        "David S. Miller" <davem@davemloft.net>, kernel@pengutronix.de,
        linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
        Russell King <linux@armlinux.org.uk>
Subject: [PATCH v2] net: phy: at803x: add cable diagnostics support for ATH9331 and ATH8032
Date:   Wed, 27 May 2020 07:08:43 +0200
Message-Id: <20200527050843.843-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add support for Atheros 100Base-T PHYs. The only difference seems to be
the ability to test 2 pairs instead of 4 and the lack of 1000Base-T
specific register.

Only the ATH9331 was tested with this patch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/at803x.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index acd51b29a476..4b9dd43b5b5b 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -920,10 +920,16 @@ static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
 static int at803x_cable_test_get_status(struct phy_device *phydev,
 					bool *finished)
 {
-	unsigned long pair_mask = 0xf;
+	unsigned long pair_mask;
 	int retries = 20;
 	int pair, ret;
 
+	if (phydev->phy_id == ATH9331_PHY_ID ||
+	    phydev->phy_id == ATH8032_PHY_ID)
+		pair_mask = 0x3;
+	else
+		pair_mask = 0xf;
+
 	*finished = false;
 
 	/* According to the datasheet the CDT can be performed when
@@ -958,7 +964,9 @@ static int at803x_cable_test_start(struct phy_device *phydev)
 	 */
 	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
 	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
-	phy_write(phydev, MII_CTRL1000, 0);
+	if (phydev->phy_id != ATH9331_PHY_ID &&
+	    phydev->phy_id != ATH8032_PHY_ID)
+		phy_write(phydev, MII_CTRL1000, 0);
 
 	/* we do all the (time consuming) work later */
 	return 0;
@@ -1032,6 +1040,7 @@ static struct phy_driver at803x_driver[] = {
 	.name			= "Qualcomm Atheros AR8032",
 	.probe			= at803x_probe,
 	.remove			= at803x_remove,
+	.flags			= PHY_POLL_CABLE_TEST,
 	.config_init		= at803x_config_init,
 	.link_change_notify	= at803x_link_change_notify,
 	.set_wol		= at803x_set_wol,
@@ -1041,15 +1050,20 @@ static struct phy_driver at803x_driver[] = {
 	/* PHY_BASIC_FEATURES */
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
+	.cable_test_start	= at803x_cable_test_start,
+	.cable_test_get_status	= at803x_cable_test_get_status,
 }, {
 	/* ATHEROS AR9331 */
 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
 	.name			= "Qualcomm Atheros AR9331 built-in PHY",
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
+	.flags			= PHY_POLL_CABLE_TEST,
 	/* PHY_BASIC_FEATURES */
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
+	.cable_test_start	= at803x_cable_test_start,
+	.cable_test_get_status	= at803x_cable_test_get_status,
 } };
 
 module_phy_driver(at803x_driver);
-- 
2.26.2