Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   dillon.minfei@gmail.com
To:     robh+dt@kernel.org, p.zabel@pengutronix.de,
        mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
        thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie,
        daniel@ffwll.ch, mturquette@baylibre.com, sboyd@kernel.org,
        andy.shevchenko@gmail.com, noralf@tronnes.org,
        linus.walleij@linaro.org, broonie@kernel.org
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com,
        dri-devel@lists.freedesktop.org, linux-clk@vger.kernel.org,
        dillonhua@gmail.com, dillon min <dillon.minfei@gmail.com>
Subject: [PATCH v6 9/9] spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't be coexit with 'SPI_3WIRE' mode
Date:   Wed, 27 May 2020 15:27:33 +0800
Message-Id: <1590564453-24499-10-git-send-email-dillon.minfei@gmail.com>
In-Reply-To: <1590564453-24499-1-git-send-email-dillon.minfei@gmail.com>
References: <1590564453-24499-1-git-send-email-dillon.minfei@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: dillon min <dillon.minfei@gmail.com>

since chip spi driver need get the transfer direction by 'tx_buf' and
'rx_buf' of 'struct spi_transfer' in 'SPI_3WIRE' mode.

so, we need bypass 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX'
feature in 'SPI_3WIRE' mode

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
 drivers/spi/spi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c92c89467e7e..f8844116f955 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1023,7 +1023,8 @@ static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 	void *tmp;
 	unsigned int max_tx, max_rx;
 
-	if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
+	if ((ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX))
+		&& !(msg->spi->mode & SPI_3WIRE)) {
 		max_tx = 0;
 		max_rx = 0;
 
-- 
2.7.4