Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To:     Geert Uytterhoeven <geert+renesas@glider.be>,
        Magnus Damm <magnus.damm@gmail.com>,
        Rob Herring <robh+dt@kernel.org>
Cc:     linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Prabhakar <prabhakar.csengg@gmail.com>,
        Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH 3/3] ARM: dts: r8a7742-iwg21d-q7: Sound DMA support via DVC on DTS
Date:   Wed, 27 May 2020 21:23:33 +0100
Message-Id: <1590611013-26029-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
In-Reply-To: <1590611013-26029-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
References: <1590611013-26029-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Enable sound with DMA support on carrier board.

DMA transfer uses DVC

     DMA               DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]

     DMA               DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 63 +++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index d6154fd..704fe22 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -5,6 +5,29 @@
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ *      amixer set "DVC Out" 100%
+ *      amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *      amixer set "DVC Out Mute" on
+ *      amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *      amixer set "DVC Out Ramp" on
+ *      aplay xxx.wav &
+ *      amixer set "DVC Out"  80%  // Volume Down
+ *      amixer set "DVC Out" 100%  // Volume Up
+ */
+
 /dts-v1/;
 #include "r8a7742-iwg21m.dtsi"
 
@@ -37,6 +60,21 @@
 		regulator-always-on;
 	};
 
+	rsnd_sgtl5000: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
 	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
@@ -152,6 +190,11 @@
 		power-source = <1800>;
 	};
 
+	sound_pins: sound {
+		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -168,6 +211,22 @@
 	};
 };
 
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi4 &src4 &dvc1>;
+			capture = <&ssi3 &src3 &dvc0>;
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
@@ -201,6 +260,10 @@
 	status = "okay";
 };
 
+&ssi4 {
+	shared-pin;
+};
+
 &usbphy {
 	status = "okay";
 };
-- 
2.7.4