Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 28 May 2020 15:17:13 -0600
From:   Rob Herring <robh@kernel.org>
To:     Amit Singh Tomar <amittomer25@gmail.com>
Cc:     andre.przywara@arm.com, afaerber@suse.de, vkoul@kernel.org,
        manivannan.sadhasivam@linaro.org, dan.j.williams@intel.com,
        cristian.ciocaltea@gmail.com, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-actions@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 05/10] dt-bindings: dmaengine: convert Actions Semi
 Owl SoCs bindings to yaml
Message-ID: <20200528211713.GA694871@bogus>
References: <1589912368-480-1-git-send-email-amittomer25@gmail.com>
 <1589912368-480-6-git-send-email-amittomer25@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1589912368-480-6-git-send-email-amittomer25@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, May 19, 2020 at 11:49:23PM +0530, Amit Singh Tomar wrote:
> Converts the device tree bindings for the Actions Semi Owl SoCs DMA
> Controller over to YAML schemas.
> 
> It also adds new compatible string "actions,s700-dma".
> 
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
> ---
> Change since v1:
> 	* Updated the description field to reflect
> 	  only the necessary information.
> 	* replaced the maxItems field with description for each 
>           controller attribute(except interrupts).
> 	* Replaced the clock macro with number to keep the example
>           as independent as possible.
> 	  	
>  New patch, was not there in RFC.
> ---
>  Documentation/devicetree/bindings/dma/owl-dma.txt  | 47 -------------
>  Documentation/devicetree/bindings/dma/owl-dma.yaml | 76 ++++++++++++++++++++++
>  2 files changed, 76 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
>  create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.yaml
> 
> diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt
> deleted file mode 100644
> index 03e9bb12b75f..000000000000
> --- a/Documentation/devicetree/bindings/dma/owl-dma.txt
> +++ /dev/null
> @@ -1,47 +0,0 @@
> -* Actions Semi Owl SoCs DMA controller
> -
> -This binding follows the generic DMA bindings defined in dma.txt.
> -
> -Required properties:
> -- compatible: Should be "actions,s900-dma".
> -- reg: Should contain DMA registers location and length.
> -- interrupts: Should contain 4 interrupts shared by all channel.
> -- #dma-cells: Must be <1>. Used to represent the number of integer
> -              cells in the dmas property of client device.
> -- dma-channels: Physical channels supported.
> -- dma-requests: Number of DMA request signals supported by the controller.
> -                Refer to Documentation/devicetree/bindings/dma/dma.txt
> -- clocks: Phandle and Specifier of the clock feeding the DMA controller.
> -
> -Example:
> -
> -Controller:
> -                dma: dma-controller@e0260000 {
> -                        compatible = "actions,s900-dma";
> -                        reg = <0x0 0xe0260000 0x0 0x1000>;
> -                        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> -                                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> -                                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> -                                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> -                        #dma-cells = <1>;
> -                        dma-channels = <12>;
> -                        dma-requests = <46>;
> -                        clocks = <&clock CLK_DMAC>;
> -                };
> -
> -Client:
> -
> -DMA clients connected to the Actions Semi Owl SoCs DMA controller must
> -use the format described in the dma.txt file, using a two-cell specifier
> -for each channel.
> -
> -The two cells in order are:
> -1. A phandle pointing to the DMA controller.
> -2. The channel id.
> -
> -uart5: serial@e012a000 {
> -        ...
> -        dma-names = "tx", "rx";
> -        dmas = <&dma 26>, <&dma 27>;
> -        ...
> -};
> diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
> new file mode 100644
> index 000000000000..82e7d261e967
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/owl-dma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Actions Semi Owl SoCs DMA controller
> +
> +description: |
> +  The OWL DMA is a general-purpose direct memory access controller capable of
> +  supporting 10 and 12 independent DMA channels for S700 and S900 SoCs
> +  respectively.
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> +
> +allOf:
> +  - $ref: "dma-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    enum:
> +      - actions,s900-dma
> +      - actions,s700-dma
> +
> +  reg:
> +    description:
> +      DMA registers location and length.

Don't need a description. Just need: 

maxItems: 1

> +
> +  interrupts:
> +    description:
> +      controller supports 4 interrupts, which are freely assignable to the
> +      DMA channels.
> +    maxItems: 4
> +
> +  "#dma-cells":
> +    const: 1
> +
> +  dma-channels:
> +    description:
> +      Physical channels supported.

Already defined in dma-controller.yaml. You need to add any constraints.
2^32 channels okay?

> +
> +  dma-requests:
> +    description:
> +      Number of DMA request signals supported by the controller.

Same here.

> +
> +  clocks:
> +    description:
> +      Phandle and Specifier of the clock feeding the DMA controller.

How many?

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#dma-cells"
> +  - dma-channels
> +  - dma-requests
> +  - clocks

Add:

unevaluatedProperties: false

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    dma: dma-controller@e0260000 {
> +        compatible = "actions,s900-dma";
> +        reg = <0x0 0xe0260000 0x0 0x1000>;
> +        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> +        #dma-cells = <1>;
> +        dma-channels = <12>;
> +        dma-requests = <46>;
> +        clocks = <&clock 22>;
> +    };
> +
> +...
> -- 
> 2.7.4
>