Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 29 May 2020 13:05:14 -0600
From:   Rob Herring <robh@kernel.org>
To:     Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc:     jic23@kernel.org, mchehab+huawei@kernel.org, davem@davemloft.net,
        gregkh@linuxfoundation.org, linux-iio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 11/12] dt-bindings: iio: imu: Add inv_icm42600
 documentation
Message-ID: <20200529190514.GA2762360@bogus>
References: <20200527185711.21331-1-jmaneyrol@invensense.com>
 <20200527185711.21331-12-jmaneyrol@invensense.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200527185711.21331-12-jmaneyrol@invensense.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, May 27, 2020 at 08:57:10PM +0200, Jean-Baptiste Maneyrol wrote:
> Document the ICM-426xxx devices devicetree bindings.
> 
> Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
> ---
>  .../bindings/iio/imu/invensense,icm42600.yaml | 86 +++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> new file mode 100644
> index 000000000000..c5b046e0ce36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: InvenSense ICM-426xx Inertial Measurement Unit
> +
> +maintainers:
> +  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
> +
> +description: |
> +  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer.
> +
> +  It has a configurable host interface that supports I3C, I2C and SPI serial communication, features a 2kB FIFO and
> +  2 programmable interrupts with ultra-low-power wake-on-motion support to minimize system power consumption.
> +
> +  Other industry-leading features include InvenSense on-chip APEX Motion Processing engine for gesture recognition,
> +  activity classification, and pedometer, along with programmable digital filters, and an embedded temperature sensor.

Wrap lines at <80 chars.

> +
> +  https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - invensense,icm42600
> +      - invensense,icm42602
> +      - invensense,icm42605
> +      - invensense,icm42622
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  drive-open-drain:
> +    type: boolean
> +
> +  vdd-supply:
> +    description: Regulator that provides power to the sensor
> +
> +  vddio-supply:
> +    description: Regulator that provides power to the bus
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        icm42605@68 {
> +          compatible = "invensense,icm42605";
> +          reg = <0x68>;
> +          interrupt-parent = <&gpio2>;
> +          interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> +          vdd-supply = <&vdd>;
> +          vddio-supply = <&vddio>;
> +        };
> +    };
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        icm42602@0 {
> +          compatible = "invensense,icm42602";
> +          reg = <0>;
> +          spi-max-frequency = <24000000>;
> +          spi-cpha;
> +          spi-cpol;
> +          interrupt-parent = <&gpio1>;
> +          interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> +          vdd-supply = <&vdd>;
> +          vddio-supply = <&vddio>;
> +        };
> +    };
> -- 
> 2.17.1
>