Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Florian Fainelli <f.fainelli@gmail.com>
To:     linux-kernel@vger.kernel.org
Cc:     Florian Fainelli <f.fainelli@gmail.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
        Scott Branden <sbranden@broadcom.com>,
        bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM
        BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
        Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
        Stefan Wahren <stefan.wahren@i2se.com>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
        linux-gpio@vger.kernel.org (open list:PIN CONTROL SUBSYSTEM),
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
        BCM2711/BCM2835 ARM ARCHITECTURE),
        linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
        BCM2711/BCM2835 ARM ARCHITECTURE)
Subject: [PATCH v2 2/4] dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
Date:   Fri, 29 May 2020 12:15:20 -0700
Message-Id: <20200529191522.27938-3-f.fainelli@gmail.com>
In-Reply-To: <20200529191522.27938-1-f.fainelli@gmail.com>
References: <20200529191522.27938-1-f.fainelli@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

BCM7211 supports wake-up interrupts in the form of optional interrupt
lines, one per bank, plus the "all banks" interrupt line.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt         | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index dfc67b90591c..5682b2010e50 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -16,7 +16,9 @@ Required properties:
   second cell is used to specify optional parameters:
   - bit 0 specifies polarity (0 for normal, 1 for inverted)
 - interrupts : The interrupt outputs from the controller. One interrupt per
-  individual bank followed by the "all banks" interrupt.
+  individual bank followed by the "all banks" interrupt. For BCM7211, an
+  additional set of per-bank interrupt line and an "all banks" wake-up
+  interrupt may be specified.
 - interrupt-controller: Marks the device node as an interrupt controller.
 - #interrupt-cells : Should be 2.
   The first cell is the GPIO number.
-- 
2.17.1