Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Florian Fainelli <f.fainelli@gmail.com>
To:     linux-kernel@vger.kernel.org
Cc:     Florian Fainelli <f.fainelli@gmail.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
        Scott Branden <sbranden@broadcom.com>,
        bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM
        BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
        Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
        Stefan Wahren <stefan.wahren@i2se.com>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
        linux-gpio@vger.kernel.org (open list:PIN CONTROL SUBSYSTEM),
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
        BCM2711/BCM2835 ARM ARCHITECTURE),
        linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
        BCM2711/BCM2835 ARM ARCHITECTURE)
Subject: [PATCH v2 1/4] dt-bindings: pinctrl: Document 7211 compatible for brcm,bcm2835-gpio.txt
Date:   Fri, 29 May 2020 12:15:19 -0700
Message-Id: <20200529191522.27938-2-f.fainelli@gmail.com>
In-Reply-To: <20200529191522.27938-1-f.fainelli@gmail.com>
References: <20200529191522.27938-1-f.fainelli@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Document the brcm,bcm7211-gpio compatible string in the
brcm,bcm2835-gpio.txt document.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 3cab7336a326..dfc67b90591c 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -9,6 +9,7 @@ Required properties:
   "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
   "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
   "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl
+  "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
 - reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the
-- 
2.17.1