Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Sumit Semwal <sumit.semwal@linaro.org>
To:     agross@kernel.org, bjorn.andersson@linaro.org, lgirdwood@gmail.com,
        broonie@kernel.org, robh+dt@kernel.org
Cc:     nishakumari@codeaurora.org, linux-arm-msm@vger.kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        kgunda@codeaurora.org, rnayak@codeaurora.org,
        Sumit Semwal <sumit.semwal@linaro.org>
Subject: [PATCH v4 0/5] Qualcomm labibb regulator driver
Date:   Tue,  2 Jun 2020 15:39:19 +0530
Message-Id: <20200602100924.26256-1-sumit.semwal@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This series adds a driver for LAB/IBB regulators found on some Qualcomm SoCs.
These regulators provide positive and/or negative boost power supplies
for LCD/LED display panels connected to the SoC.

This series adds the support for pmi8998 PMIC found in SDM845 family of SoCs.

Changes from v3:
- Handled review comments from v3
- In core, swapped the meaning of enable_time and poll_enabled_time; so we
   wait for total enable_time delay, and poll in-between at poll_enabled_time
   interval now.
- fixed dt_bindings_check issues in dt-bindings patch.
- Cleanup of register_labibb_regulator(), and adapted to updated meaning of
   poll_enabled_time.

Changes from v2:
- Review comments from v2
- Moved the poll-to-check-enabled functionality to regulator core.
- Used more core features to simplify enable/disable functions.
- Moved the devicetree binding to yaml.
- Updated interrupt-names and simplified handling.

Changes from v1:
- Incorporated review comments from v1
- Changed from virtual-regulator based handling to individual regulator based
  handling.
- Reworked the core to merge most of enable/disable functions, combine the
  regulator_ops into one and allow for future variations.
- is_enabled() is now _really_ is_enabled()
- Simplified the SC interrupt handling - use regmap_read_poll_timeout,
  REGULATOR_EVENT_OVER_CURRENT handling and notification to clients.

Nisha Kumari (4):
  dt-bindings: regulator: Add labibb regulator
  arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
  regulator: qcom: Add labibb driver
  regulator: qcom: labibb: Add SC interrupt handling

Sumit Semwal (1):
  regulator: Allow regulators to verify enabled during enable()

 .../regulator/qcom-labibb-regulator.yaml      |  79 +++++
 arch/arm64/boot/dts/qcom/pmi8998.dtsi         |  14 +
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/core.c                      |  58 +++-
 drivers/regulator/qcom-labibb-regulator.c     | 289 ++++++++++++++++++
 include/linux/regulator/driver.h              |   5 +
 7 files changed, 455 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
 create mode 100644 drivers/regulator/qcom-labibb-regulator.c

-- 
2.26.2