Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Alexandre Ghiti <alex@ghiti.fr>
To:     Paul Walmsley <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Zong Li <zong.li@sifive.com>, Anup Patel <anup@brainfault.org>,
        Christoph Hellwig <hch@lst.de>,
        linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Alexandre Ghiti <alex@ghiti.fr>
Subject: [PATCH v2 6/8] riscv: Allow user to downgrade to sv39 when hw supports sv48
Date:   Wed,  3 Jun 2020 04:11:02 -0400
Message-Id: <20200603081104.14004-7-alex@ghiti.fr>
In-Reply-To: <20200603081104.14004-1-alex@ghiti.fr>
References: <20200603081104.14004-1-alex@ghiti.fr>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This is made possible by using the mmu-type property of the cpu node of
the device tree.

By default, the kernel will boot with 4-level page table if the hw supports
it but it can be interesting for the user to select 3-level page table as
it is less memory consuming and faster since it requires less memory
accesses in case of a TLB miss.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
 arch/riscv/mm/init.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index a937173af13d..4064639b24e4 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -509,10 +509,32 @@ void disable_pgtable_l4(void)
  * then read SATP to see if the configuration was taken into account
  * meaning sv48 is supported.
  */
-asmlinkage __init void set_satp_mode(uintptr_t load_pa)
+asmlinkage __init void set_satp_mode(uintptr_t load_pa, uintptr_t dtb_pa)
 {
 	u64 identity_satp, hw_satp;
+	int cpus_node;
 
+	/* 1/ Check if the user asked for sv39 explicitly in the device tree */
+	cpus_node = fdt_path_offset((void *)dtb_pa, "/cpus");
+	if (cpus_node >= 0) {
+		int node;
+
+		fdt_for_each_subnode(node, (void *)dtb_pa, cpus_node) {
+			const char *mmu_type = fdt_getprop((void *)dtb_pa, node,
+							"mmu-type", NULL);
+			if (!mmu_type)
+				continue;
+
+			if (!strcmp(mmu_type, "riscv,sv39")) {
+				disable_pgtable_l4();
+				return;
+			}
+
+			break;
+		}
+	}
+
+	/* 2/ Determine if the HW supports sv48: if not, fallback to sv39 */
 	create_pgd_mapping(early_pg_dir, load_pa, (uintptr_t)early_pud,
 			   PGDIR_SIZE, PAGE_TABLE);
 	create_pud_mapping(early_pud, load_pa, (uintptr_t)early_pmd,
@@ -560,7 +582,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	load_sz = (uintptr_t)(&_end) - load_pa;
 
 #if defined(CONFIG_64BIT) && !defined(CONFIG_MAXPHYSMEM_2GB)
-	set_satp_mode(load_pa);
+	set_satp_mode(load_pa, dtb_pa);
 #endif
 
 	kernel_virt_addr = KERNEL_VIRT_ADDR;
-- 
2.20.1