Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 4 Jun 2020 18:33:03 +0100
From:   Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To:     Gene Chen <gene.chen.richtek@gmail.com>
CC:     <jic23@kernel.org>, <matthias.bgg@gmail.com>, <knaack.h@gmx.de>,
        <lars@metafoo.de>, <pmeerw@pmeerw.net>,
        <linux-iio@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-mediatek@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <gene_chen@richtek.com>,
        <Wilma.Wu@mediatek.com>, <shufan_lee@richtek.com>,
        <cy_huang@richtek.com>, <benjamin.chao@mediatek.com>
Subject: Re: [PATCH] iio: adc: mt6360: Add ADC driver for MT6360
Message-ID: <20200604183303.000006a6@Huawei.com>
In-Reply-To: <1591239631-12265-1-git-send-email-gene.chen.richtek@gmail.com>
References: <1591239631-12265-1-git-send-email-gene.chen.richtek@gmail.com>
Organization: Huawei Technologies Research and Development (UK) Ltd.
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, 4 Jun 2020 11:00:31 +0800
Gene Chen <gene.chen.richtek@gmail.com> wrote:

> From: Gene Chen <gene_chen@richtek.com>
> 
> Add MT6360 ADC driver include Charger Current, Voltage, and
> Temperature.
> 
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> base-commit: 098c4adf249c198519a4abebe482b1e6b8c50e47

Hi Gene,

Comments inline.

I'd like to understand more in particularly on why the thread, rather than
using one of the standard triggers that handles that for you?
(I can think of a few reasons but better to hear from you!)

Thanks,

Jonathan

> ---
>  drivers/iio/adc/Kconfig      |  11 ++
>  drivers/iio/adc/Makefile     |   1 +
>  drivers/iio/adc/mt6360-adc.c | 419 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 431 insertions(+)
>  create mode 100644 drivers/iio/adc/mt6360-adc.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 12bb8b7..a9736ec 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -657,6 +657,17 @@ config MCP3911
>  	  This driver can also be built as a module. If so, the module will be
>  	  called mcp3911.
>  
> +config MEDIATEK_MT6360_ADC
> +	tristate "Mediatek MT6360 ADC Part"
> +	depends on MFD_MT6360
> +	select IIO_BUFFER
> +	select IIO_KFIFO_BUF
> +	help
> +	  Say Y here to enable MT6360 ADC Part.
> +	  Integrated for System Monitoring include
> +	  Charger and Battery Current, Voltage and
> +	  Terperature

Temperature

> +
>  config MEDIATEK_MT6577_AUXADC
>  	tristate "MediaTek AUXADC driver"
>  	depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 6378078..4209776 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -62,6 +62,7 @@ obj-$(CONFIG_MAX9611) += max9611.o
>  obj-$(CONFIG_MCP320X) += mcp320x.o
>  obj-$(CONFIG_MCP3422) += mcp3422.o
>  obj-$(CONFIG_MCP3911) += mcp3911.o
> +obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o
>  obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
>  obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
>  obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
> diff --git a/drivers/iio/adc/mt6360-adc.c b/drivers/iio/adc/mt6360-adc.c
> new file mode 100644
> index 0000000..bc9c488
> --- /dev/null
> +++ b/drivers/iio/adc/mt6360-adc.c
> @@ -0,0 +1,419 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + *
> + * Author: Gene Chen <gene_chen@richtek.com>
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/kfifo_buf.h>
> +#include <linux/init.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/kthread.h>
> +#include <linux/ktime.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/mt6360.h>
> +
> +/* CHG_CTRL3 0x13 */
> +#define MT6360_AICR_MASK	(0xFC)
> +#define MT6360_AICR_SHFT	(2)
> +#define MT6360_AICR_400MA	(0x6)
> +/* ADC_CONFIG 0x56 */
> +#define MT6360_ADCEN_SHFT	(7)
> +/* ADC_RPT_1 0x5A */
> +#define MT6360_PREFERCH_MASK	(0xF0)
> +#define MT6360_PREFERCH_SHFT	(4)
> +#define MT6360_RPTCH_MASK	(0x0F)

No need for brackets around raw numbers.

> +
> +enum {
> +	MT6360_CHAN_USBID = 0,
> +	MT6360_CHAN_VBUSDIV5,
> +	MT6360_CHAN_VBUSDIV2,
> +	MT6360_CHAN_VSYS,
> +	MT6360_CHAN_VBAT,
> +	MT6360_CHAN_IBUS,
> +	MT6360_CHAN_IBAT,
> +	MT6360_CHAN_CHG_VDDP,
> +	MT6360_CHAN_TEMP_JC,
> +	MT6360_CHAN_VREF_TS,
> +	MT6360_CHAN_TS,
> +	MT6360_CHAN_MAX,
> +};
> +
> +struct mt6360_adc_data {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	struct task_struct *scan_task;
> +	struct completion adc_complete;
> +	struct mutex adc_lock;
> +	ktime_t last_off_timestamps[MT6360_CHAN_MAX];
> +	int irq;
> +};
> +
> +static inline int mt6360_adc_val_converte(int val, int multiplier,
> +					   int offset, int divisor)
> +{
> +	return ((val * multiplier) + offset) / divisor;
> +}
> +
> +static int mt6360_adc_get_process_val(struct mt6360_adc_data *info,
> +				      int chan_idx, int *val)
> +{
> +	unsigned int regval = 0;
> +	int ret;
> +	const struct converter {
> +		int multiplier;
> +		int offset;
> +		int divisor;
> +	} adc_converter[MT6360_CHAN_MAX] = {
> +		{ 1250, 0, 1}, /* USBID */
> +		{ 6250, 0, 1}, /* VBUSDIV5 */
> +		{ 2500, 0, 1}, /* VBUSDIV2 */
> +		{ 1250, 0, 1}, /* VSYS */
> +		{ 1250, 0, 1}, /* VBAT */
> +		{ 2500, 0, 1}, /* IBUS */
> +		{ 2500, 0, 1}, /* IBAT */
> +		{ 1250, 0, 1}, /* CHG_VDDP */
> +		{ 105, -8000, 100}, /* TEMP_JC */
> +		{ 1250, 0, 1}, /* VREF_TS */
> +		{ 1250, 0, 1}, /* TS */
> +	}, sp_ibus_adc_converter = { 1900, 0, 1 }, *sel_converter;
> +
> +	if (chan_idx < 0 || chan_idx >= MT6360_CHAN_MAX)
> +		return -EINVAL;
> +	sel_converter = adc_converter + chan_idx;
> +	if (chan_idx == MT6360_CHAN_IBUS) {
> +		/* ibus chan will be affected by aicr config */
> +		/* if aicr < 400, apply the special ibus converter */
> +		ret = regmap_read(info->regmap, MT6360_PMU_CHG_CTRL3, &regval);
> +		if (ret < 0)
> +			return ret;
> +		regval = (regval & MT6360_AICR_MASK) >> MT6360_AICR_SHFT;
> +		if (regval < MT6360_AICR_400MA)
> +			sel_converter = &sp_ibus_adc_converter;
> +	}
> +	*val = mt6360_adc_val_converte(*val, sel_converter->multiplier,
> +				 sel_converter->offset, sel_converter->divisor);
As mentioned below. Preference is always for linear conversion to be left
to consumers, either in userspace or when in kernel let the core code
deal with applying them.

So unless I'm missing something we should have offset and scale provided
via appropriate IIO_INFO elements and read_raw callbacks.

> +	return 0;
> +}
> +
> +static int mt6360_adc_read_raw(struct iio_dev *iio_dev,
> +			       const struct iio_chan_spec *chan,
> +			       int *val, int *val2, long mask)
> +{
> +	struct mt6360_adc_data *mad = iio_priv(iio_dev);
> +	long timeout;
> +	u8 tmp[2], rpt[3];
> +	ktime_t start_t, predict_end_t;
> +	int ret;
> +
> +	mutex_lock(&mad->adc_lock);
> +	/* select preferred channel that we want */
> +	ret = regmap_update_bits(mad->regmap,
> +				 MT6360_PMU_ADC_RPT_1, MT6360_PREFERCH_MASK,
> +				 chan->channel << MT6360_PREFERCH_SHFT);
> +	if (ret < 0)
> +		goto err_adc_init;

Blank line here would help readability a tiny bit.
Same in other cases where you have a statement then an error handling block.

> +	/* enable adc channel we want and adc_en */
> +	memset(tmp, 0, sizeof(tmp));
> +	tmp[0] |= BIT(MT6360_ADCEN_SHFT);
> +	tmp[(chan->channel / 8) ? 0 : 1] |= BIT(chan->channel % 8);

Hmm. This a write into a 16 bit big endian buffer I think. Would it better
to just treat it as an __be16?

> +	ret = regmap_bulk_write(mad->regmap,
> +				MT6360_PMU_ADC_CONFIG, tmp, sizeof(tmp));
> +	if (ret < 0)
> +		goto err_adc_init;
> +	start_t = ktime_get();
> +	predict_end_t = ktime_add_ms(
> +				   mad->last_off_timestamps[chan->channel], 50);
> +	if (ktime_after(start_t, predict_end_t))
> +		predict_end_t = ktime_add_ms(start_t, 25);
> +	else
> +		predict_end_t = ktime_add_ms(start_t, 75);
> +	enable_irq(mad->irq);

So why do we need to only enable the irq here. I would have assumed it
would not happen until we trigger a read?

> +retry:
> +	reinit_completion(&mad->adc_complete);

Always reinit completion before enabling the irq.  Too many races happen when doing
it the other way around.

> +	/* wait for conversion to complete */
> +	timeout = wait_for_completion_interruptible_timeout(
> +				     &mad->adc_complete, msecs_to_jiffies(200));
> +	if (timeout == 0) {
> +		ret = -ETIMEDOUT;
> +		goto err_adc_conv;
> +	} else if (timeout < 0) {
> +		ret = -EINTR;
> +		goto err_adc_conv;
> +	}
> +	memset(rpt, 0, sizeof(rpt));
If reading the whole size of rpt we should never need to zero it.

> +	ret = regmap_bulk_read(mad->regmap,
> +			       MT6360_PMU_ADC_RPT_1, rpt, sizeof(rpt));
> +	if (ret < 0)
> +		goto err_adc_conv;
> +	/* get report channel */
> +	if ((rpt[0] & MT6360_RPTCH_MASK) != chan->channel) {
> +		dev_dbg(&iio_dev->dev,
> +			"not wanted channel report [%02x]\n", rpt[0]);
> +		goto retry;
> +	}
> +	if (!ktime_after(ktime_get(), predict_end_t)) {
> +		dev_dbg(&iio_dev->dev, "time is not after 26ms chan_time\n");
> +		goto retry;
> +	}
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		*val = (rpt[1] << 8) | rpt[2];
As mentioned below. It's normally an either / or for processed and raw.
When conversion is linear we prefer to push the maths to userspace.
If it's not you have no real choice but to do it in kernel and the raw
reading isn't much use.

> +		break;
> +	case IIO_CHAN_INFO_PROCESSED:
> +		*val = (rpt[1] << 8) | rpt[2];
> +		ret = mt6360_adc_get_process_val(mad, chan->channel, val);
> +		if (ret < 0)
> +			goto err_adc_conv;
> +		break;
> +	default:
> +		break;
> +	}
> +	ret = IIO_VAL_INT;
> +err_adc_conv:
> +	disable_irq(mad->irq);
> +	/* whatever disable all channel and keep adc_en*/
> +	memset(tmp, 0, sizeof(tmp));
> +	tmp[0] |= BIT(MT6360_ADCEN_SHFT);
> +	regmap_bulk_write(mad->regmap, MT6360_PMU_ADC_CONFIG, tmp, sizeof(tmp));
> +	mad->last_off_timestamps[chan->channel] = ktime_get();
> +	/* set prefer channel to 0xf */
> +	regmap_update_bits(mad->regmap, MT6360_PMU_ADC_RPT_1,
> +			   MT6360_PREFERCH_MASK, 0xF << MT6360_PREFERCH_SHFT);
> +err_adc_init:
> +	mutex_unlock(&mad->adc_lock);
> +	return ret;
> +}
> +
> +static const struct iio_info mt6360_adc_iio_info = {
> +	.read_raw = mt6360_adc_read_raw,
> +};
> +
> +#define MT6360_ADC_CHAN(_idx, _type) {				\
> +	.type = _type,						\
> +	.channel = MT6360_CHAN_##_idx,				\
> +	.scan_index = MT6360_CHAN_##_idx,			\
> +	.scan_type =  {						\
> +		.sign = 's',					\
> +		.realbits = 32,					\
> +		.storagebits = 32,				\
> +		.shift = 0,					\
> +		.endianness = IIO_CPU,				\
> +	},							\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
> +				BIT(IIO_CHAN_INFO_PROCESSED),	\

It very rarely makes sense to provide both raw and processed.
Why are you doing so here?

> +	.datasheet_name = #_idx,				\
> +	.indexed = 1,						\
> +}
> +
> +static const struct iio_chan_spec mt6360_adc_channels[] = {
> +	MT6360_ADC_CHAN(USBID, IIO_VOLTAGE),
> +	MT6360_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE),
> +	MT6360_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE),
> +	MT6360_ADC_CHAN(VSYS, IIO_VOLTAGE),
> +	MT6360_ADC_CHAN(VBAT, IIO_VOLTAGE),
> +	MT6360_ADC_CHAN(IBUS, IIO_CURRENT),
> +	MT6360_ADC_CHAN(IBAT, IIO_CURRENT),
> +	MT6360_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE),
> +	MT6360_ADC_CHAN(TEMP_JC, IIO_TEMP),
> +	MT6360_ADC_CHAN(VREF_TS, IIO_VOLTAGE),
> +	MT6360_ADC_CHAN(TS, IIO_VOLTAGE),
> +	IIO_CHAN_SOFT_TIMESTAMP(MT6360_CHAN_MAX),
> +};
> +
> +static irqreturn_t mt6360_pmu_adc_donei_handler(int irq, void *data)
> +{
> +	struct mt6360_adc_data *mad = iio_priv(data);
> +
> +	complete(&mad->adc_complete);
> +	return IRQ_HANDLED;
> +}
> +
> +static int mt6360_adc_scan_task_threadfn(void *data)
> +{
> +	struct mt6360_adc_data *mad = data;
> +	struct iio_dev *indio_dev = iio_priv_to_dev(mad);
> +	int channel_vals[MT6360_CHAN_MAX];

__aligned(8) for the above as iio_push_to_buffers_with_timestamp
needs to be able to write an aligned 8 byte timestamp.
Also is that buffer long enough to allow for that timestamp?

}

> +	int i, bit, var = 0;
> +	int ret;
> +
> +	while (!kthread_should_stop()) {

So this is spinning as fast as possible?   Seems like some sort
of delay should be in here.   Why not use an existing trigger
to do this given it's sample on demand?
We have both the hrtimer trigger and a tight loop trigger
to handle usecases like this?

Is it todo with in kernel consumers?


> +		memset(channel_vals, 0, sizeof(channel_vals));
> +		i = 0;
> +		for_each_set_bit(bit, indio_dev->active_scan_mask,
> +				 indio_dev->masklength) {
> +			ret = mt6360_adc_read_raw(indio_dev,
> +						  mt6360_adc_channels + bit,
> +						  &var, NULL,
> +						  IIO_CHAN_INFO_PROCESSED);
> +			if (ret < 0)
> +				dev_err(mad->dev, "get adc[%d] fail\n", bit);
> +			channel_vals[i++] = var;
> +			if (kthread_should_stop())
> +				goto out;
> +		}
> +		iio_push_to_buffers_with_timestamp(indio_dev, channel_vals,
> +						   iio_get_time_ns(indio_dev));
> +	}
> +out:
> +	do_exit(0);
> +	return 0;
> +}
> +
> +static int mt6360_adc_iio_post_enable(struct iio_dev *iio_dev)
> +{
> +	struct mt6360_adc_data *mad = iio_priv(iio_dev);
> +
> +	mad->scan_task = kthread_run(mt6360_adc_scan_task_threadfn, mad,
> +				     "scan_thread.%s", dev_name(&iio_dev->dev));
> +	return PTR_ERR_OR_ZERO(mad->scan_task);
> +}
> +
> +static int mt6360_adc_iio_pre_disable(struct iio_dev *iio_dev)
> +{
> +	struct mt6360_adc_data *mad = iio_priv(iio_dev);
> +
> +	if (mad->scan_task) {

How could you get here without this being true?

> +		kthread_stop(mad->scan_task);
> +		mad->scan_task = NULL;
> +	}
> +	return 0;
> +}
> +
> +static const struct iio_buffer_setup_ops mt6360_adc_iio_setup_ops = {
> +	.postenable = mt6360_adc_iio_post_enable,
> +	.predisable = mt6360_adc_iio_pre_disable,
> +};
> +
> +static int mt6360_adc_iio_device_register(struct iio_dev *indio_dev)
> +{
> +	struct mt6360_adc_data *mad = iio_priv(indio_dev);
> +	struct iio_buffer *buffer;
> +	int ret;
> +
> +	indio_dev->name = dev_name(mad->dev);
> +	indio_dev->dev.parent = mad->dev;
> +	indio_dev->dev.of_node = mad->dev->of_node;
> +	indio_dev->info = &mt6360_adc_iio_info;
> +	indio_dev->channels = mt6360_adc_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(mt6360_adc_channels);
> +	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
> +	indio_dev->setup_ops = &mt6360_adc_iio_setup_ops;
> +	buffer = devm_iio_kfifo_allocate(mad->dev);
> +	if (!buffer)
> +		return -ENOMEM;
> +	iio_device_attach_buffer(indio_dev, buffer);
> +	ret = devm_iio_device_register(mad->dev, indio_dev);
> +	if (ret < 0) {
Where possible use simple if (ret) as is can slightly simplify flow.
> +		dev_err(mad->dev, "Failed to register iio device\n");
> +		return ret;
> +	}
> +	return 0;

	return ret; drop it out of the above brackets having changed
the check.

> +}
> +
> +static inline int mt6360_adc_reset(struct mt6360_adc_data *info)
> +{
> +	u8 tmp[3] = {0x80, 0, 0};
> +	ktime_t all_off_time;
> +	int i;
> +
> +	all_off_time = ktime_get();
> +	for (i = 0; i < MT6360_CHAN_MAX; i++)
> +		info->last_off_timestamps[i] = all_off_time;
> +	/* enable adc_en, clear adc_chn_en/zcv/en/adc_wait_t/adc_idle_t */
> +	return regmap_bulk_write(info->regmap,
> +				 MT6360_PMU_ADC_CONFIG, tmp, sizeof(tmp));
> +}
> +
> +static int mt6360_adc_probe(struct platform_device *pdev)
> +{
> +	struct mt6360_adc_data *mad;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*mad));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	mad = iio_priv(indio_dev);
> +	mad->dev = &pdev->dev;
> +	init_completion(&mad->adc_complete);
> +	mutex_init(&mad->adc_lock);
> +	platform_set_drvdata(pdev, indio_dev);
> +
> +	mad->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> +	if (!mad->regmap) {
> +		dev_err(&pdev->dev, "Failed to get parent regmap\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = mt6360_adc_reset(mad);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to reset adc\n");
> +		return ret;
> +	}
> +
> +	ret = mt6360_adc_iio_device_register(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to register iio device\n");
> +		return ret;
> +	}
> +
> +	mad->irq = platform_get_irq_byname(pdev, "adc_donei");
> +	if (mad->irq < 0) {
> +		dev_err(&pdev->dev, "Failed to get adc_done irq\n");
> +		return mad->irq;
> +	}
> +
> +	irq_set_status_flags(mad->irq, IRQ_NOAUTOEN);
> +	ret = devm_request_threaded_irq(&pdev->dev, mad->irq, NULL,
> +					mt6360_pmu_adc_donei_handler,
> +					IRQF_TRIGGER_FALLING, "adc_donei",
> +					platform_get_drvdata(pdev));
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to register adc_done irq\n");
> +		return ret;
> +	}

It's unusual to register an interrupt 'after' we have made the userspace
and inkernel ABIs available (as they can often cause the interrupt to fire).

So I'd normally expect the iio_device_register call to be very last one
in probe.  Why is it not in this case?

> +
> +	return 0;
> +}
> +
> +static int mt6360_adc_remove(struct platform_device *pdev)
> +{
> +	struct mt6360_adc_data *mad = platform_get_drvdata(pdev);
> +
> +	if (mad->scan_task)
> +		kthread_stop(mad->scan_task);

I'm a bit surprised this is needed.  Remove should result in
iio_device_unregister being called which should smoothly shut
down any buffered capture that is ongoing and I would have
assumed would hence stop the thread.

You may have an ordering issue though.

> +
> +	return 0;
> +}
> +
> +static const struct of_device_id __maybe_unused mt6360_adc_of_id[] = {
> +	{ .compatible = "mediatek,mt6360_adc", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt6360_adc_of_id);
> +
> +static struct platform_driver mt6360_adc_driver = {
> +	.driver = {
> +		.name = "mt6360_adc",
> +		.owner = THIS_MODULE,
> +		.of_match_table = of_match_ptr(mt6360_adc_of_id),

Whilst it is fairly unlikely I guess that someone might want to use
ACPI to probe this lets not prevent it without good reason
(via the magic PRP0001) ID so please drop the of_match_ptr protection.

> +	},
> +	.probe = mt6360_adc_probe,
> +	.remove = mt6360_adc_remove,
> +};
> +module_platform_driver(mt6360_adc_driver);
> +
> +MODULE_AUTHOR("Gene Chen <gene_chen@richtek.com>");
> +MODULE_DESCRIPTION("MT6360 ADC Driver");
> +MODULE_LICENSE("GPL v2");