Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751841AbWCUXS5 (ORCPT ); Tue, 21 Mar 2006 18:18:57 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751842AbWCUXS5 (ORCPT ); Tue, 21 Mar 2006 18:18:57 -0500 Received: from rwcrmhc12.comcast.net ([216.148.227.152]:57477 "EHLO rwcrmhc12.comcast.net") by vger.kernel.org with ESMTP id S1751841AbWCUXS4 (ORCPT ); Tue, 21 Mar 2006 18:18:56 -0500 Message-ID: <442089CB.1000008@comcast.net> Date: Tue, 21 Mar 2006 18:18:35 -0500 From: Ed Sweetman User-Agent: Debian Thunderbird 1.0.7 (X11/20051019) X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org CC: alan@lxorguk.ukuu.org.uk Subject: 2.6.16-rc6-ide1 irq trap, io hang problem solved? Content-Type: multipart/mixed; boundary="------------060802050900080108010207" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9291 Lines: 309 This is a multi-part message in MIME format. --------------060802050900080108010207 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I've seen some traffic here to suggest that the problem was tracked down, but I saw nothing about it being solved completely. Currently my system hangs whenever an irq trap message appears, usually after some sort of disk io on SATA drives. Is it fixed in the GIT patchset recently posted or is this still open? 0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP]) 0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc.: Unknown device 815a Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 225 Attached are the hdparm -I's of the drives except atapi. If it's too big they'll be available at http://signal-lost.homeip.net/files/sda.txt http://signal-lost.homeip.net/files/sdb.txt http://signal-lost.homeip.net/files/sdc.txt http://signal-lost.homeip.net/files/sdd.txt --------------060802050900080108010207 Content-Type: text/plain; name="sda.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="sda.txt" /dev/sda: ATA device, with non-removable media Model Number: Maxtor 6L200S0 Serial Number: L50Q31GH Firmware Revision: BACE1G10 Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 398297088 device size with M = 1024*1024: 194481 MBytes device size with M = 1000*1000: 203928 MBytes (203 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 1 Advanced power management level: unknown setting (0x0000) Recommended acoustic management value: 192, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * 48-bit Address feature set * Automatic Acoustic Management feature set SET MAX security extension Advanced Power Management feature set * DOWNLOAD MICROCODE cmd * General Purpose Logging feature set * SMART self-test * SMART error logging Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count not supported: enhanced erase Checksum: correct --------------060802050900080108010207 Content-Type: text/plain; name="sdb.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="sdb.txt" /dev/sdb: ATA device, with non-removable media Model Number: Maxtor 6L200S0 Serial Number: L50P6WMH Firmware Revision: BACE1G10 Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 398297088 device size with M = 1024*1024: 194481 MBytes device size with M = 1000*1000: 203928 MBytes (203 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 1 Advanced power management level: unknown setting (0x0000) Recommended acoustic management value: 192, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * 48-bit Address feature set * Automatic Acoustic Management feature set SET MAX security extension Advanced Power Management feature set * DOWNLOAD MICROCODE cmd * General Purpose Logging feature set * SMART self-test * SMART error logging Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count not supported: enhanced erase Checksum: correct --------------060802050900080108010207 Content-Type: text/plain; name="sdc.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="sdc.txt" /dev/sdc: ATA device, with non-removable media Model Number: Maxtor 6Y120P0 Serial Number: Y40D924E Firmware Revision: YAR41VW0 Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 0 heads 16 0 sectors/track 63 0 -- LBA user addressable sectors: 240121728 device size with M = 1024*1024: 117246 MBytes device size with M = 1000*1000: 122942 MBytes (122 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 1 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 1 Advanced power management level: unknown setting (0x0000) Recommended acoustic management value: 192, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * Automatic Acoustic Management feature set SET MAX security extension Advanced Power Management feature set * DOWNLOAD MICROCODE cmd * SMART self-test * SMART error logging Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- above Vih Device num = 0 determined by the jumper Checksum: correct --------------060802050900080108010207 Content-Type: text/plain; name="sdd.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="sdd.txt" /dev/sdd: ATA device, with non-removable media Model Number: WDC WD1000BB-00CAA0 Serial Number: WD-WMA8C1134895 Firmware Revision: 16.06V16 Standards: Supported: 5 4 3 2 Likely used: 6 Configuration: Logical max current cylinders 16383 0 heads 16 0 sectors/track 63 0 -- LBA user addressable sectors: 195371568 device size with M = 1024*1024: 95396 MBytes device size with M = 1000*1000: 100030 MBytes (100 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 40 Queue depth: 1 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 1 Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * Device Configuration Overlay feature set * Automatic Acoustic Management feature set SET MAX security extension * DOWNLOAD MICROCODE cmd Security: supported not enabled not locked not frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- above Vih Device num = 1 determined by the jumper Checksum: correct --------------060802050900080108010207-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/