Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: HZEpOpW3Sa3I0c5eXYCVsQF2z6S0GhpC9hoQL8lIF+GAgEMlRkjL0WUdLUTJlyt/zqATqFcSUx
 UOKcLIZ+PA4Q==
IronPort-SDR: AEwrycebfpER+iAA9i20J217dU73zmxVPR+O4cMVHtQjNBhd9Jq//NPONiPpK4DllGf1CIwuVR
 wBJx9oiFp5wQ==
From:   "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
To:     linux-kernel@vger.kernel.org, balbi@kernel.org
Cc:     gregkh@linuxfoundation.org, robh@kernel.org,
        devicetree@vger.kernel.org, p.zabel@pengutronix.de,
        linux-usb@vger.kernel.org, cheol.yong.kim@intel.com,
        qi-ming.wu@intel.com, yin1.li@intel.com,
        andriy.shevchenko@intel.com,
        "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
Subject: [PATCH v1 0/2] usb : phy: Add USB PHY support on Intel LGM SoC
Date:   Tue,  9 Jun 2020 19:08:48 +0800
Message-Id: <20200609110850.43469-1-vadivel.muruganx.ramuthevar@linux.intel.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable

Ramuthevar Vadivel Murugan (2):
  dt-bindings: usb: Add USB PHY support for Intel LGM SoC
  usb: phy: Add USB3 PHY support for Intel LGM SoC

 .../devicetree/bindings/usb/intel,lgm-usb-phy.yaml |  53 ++++
 drivers/usb/phy/Kconfig                            |  11 +
 drivers/usb/phy/Makefile                           |   1 +
 drivers/usb/phy/phy-lgm-usb.c                      | 269 +++++++++++++++++++++
 4 files changed, 334 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/intel,lgm-usb-phy.yaml
 create mode 100644 drivers/usb/phy/phy-lgm-usb.c

-- 
2.11.0