Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v2 4/6] regulator: Add support for QCOM PMIC VBUS booster
To:     Wesley Cheng <wcheng@codeaurora.org>, robh+dt@kernel.org,
        heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
        mark.rutland@arm.com, broonie@kernel.org, lgirdwood@gmail.com,
        agross@kernel.org, bjorn.andersson@linaro.org
Cc:     linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
        lijun.kernel@gmail.com, jackp@codeaurora.org,
        bryan.odonoghue@linaro.org
References: <20200612231918.8001-1-wcheng@codeaurora.org>
 <20200612231918.8001-5-wcheng@codeaurora.org>
From:   Randy Dunlap <rdunlap@infradead.org>
Message-ID: <6d23c903-abec-e2f8-1e63-c062211748c3@infradead.org>
Date:   Fri, 12 Jun 2020 20:28:14 -0700
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.8.0
MIME-Version: 1.0
In-Reply-To: <20200612231918.8001-5-wcheng@codeaurora.org>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 6/12/20 4:19 PM, Wesley Cheng wrote:
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 074a2ef55943..f9165f9f9051 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -797,6 +797,16 @@ config REGULATOR_QCOM_SPMI
>  	  Qualcomm SPMI PMICs as a module. The module will be named
>  	  "qcom_spmi-regulator".
>  
> +config REGULATOR_QCOM_USB_VBUS
> +	tristate "Qualcomm USB Vbus regulator driver"
> +	depends on SPMI || COMPILE_TEST
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  regulator used to enable the VBUS output.
> +
> +	  Say M here if you want to include support for enabling the VBUS output
> +	  as a module. The module will be named "qcom_usb-regulator".

Hi,
Shouldn't that module name match what is in the Makefile?


> +
>  config REGULATOR_RC5T583
>  	tristate "RICOH RC5T583 Power regulators"
>  	depends on MFD_RC5T583
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index c0d6b96ebd78..cbab28aa7b56 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -89,6 +89,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
>  obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
> +obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
>  obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
>  obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
>  obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o


thanks.
-- 
~Randy