Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <cover.1581478568.git.baolin.wang7@gmail.com> <CAPDyKFppDWKqCKPcLGC-0daihDZmv=1jBagTMV=4zSGGnoX12A@mail.gmail.com>
 <CADBw62rik7YR78w8MZh2wSc=qs_N3ZUGWxJYrJxRSVO2vk4V6Q@mail.gmail.com>
 <VI1PR04MB5294D8921B1250AF0C2B5B0D90850@VI1PR04MB5294.eurprd04.prod.outlook.com>
 <CADBw62oLgpUdkwShC3cSqSNx8fo=E=jiw2JeqT86j4GruqouAA@mail.gmail.com>
 <VI1PR04MB529454ADB4E52D5BF2EAF30990830@VI1PR04MB5294.eurprd04.prod.outlook.com>
 <CADBw62o2T1xTWn9U-hrOJmrcv+zvfyj4jfwGSJnhHJ9q7_pbRA@mail.gmail.com>
In-Reply-To: <CADBw62o2T1xTWn9U-hrOJmrcv+zvfyj4jfwGSJnhHJ9q7_pbRA@mail.gmail.com>
From:   Baolin Wang <baolin.wang7@gmail.com>
Date:   Mon, 15 Jun 2020 07:25:41 +0800
Message-ID: <CADBw62qmdP8xn-cfMZw6etZCOjTp3aXrOBgFe-wsVt6YsQcjqQ@mail.gmail.com>
Subject: Re: [PATCH v9 0/5] Add MMC software queue support
To:     BOUGH CHEN <haibo.chen@nxp.com>
Cc:     Ulf Hansson <ulf.hansson@linaro.org>,
        Adrian Hunter <adrian.hunter@intel.com>,
        Asutosh Das <asutoshd@codeaurora.org>,
        Orson Zhai <orsonzhai@gmail.com>,
        Chunyan Zhang <zhang.lyra@gmail.com>,
        Arnd Bergmann <arnd@arndb.de>,
        Linus Walleij <linus.walleij@linaro.org>,
        Baolin Wang <baolin.wang@linaro.org>,
        "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        dl-linux-imx <linux-imx@nxp.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Sun, Jun 14, 2020 at 11:05 PM Baolin Wang <baolin.wang7@gmail.com> wrote=
:
>
> On Wed, Jun 10, 2020 at 10:26 AM BOUGH CHEN <haibo.chen@nxp.com> wrote:
> >
> > > -----Original Message-----
> > > From: Baolin Wang [mailto:baolin.wang7@gmail.com]
> > > Sent: 2020=E5=B9=B46=E6=9C=888=E6=97=A5 19:54
> > > To: BOUGH CHEN <haibo.chen@nxp.com>
> > > Cc: Ulf Hansson <ulf.hansson@linaro.org>; Adrian Hunter
> > > <adrian.hunter@intel.com>; Asutosh Das <asutoshd@codeaurora.org>; Ors=
on
> > > Zhai <orsonzhai@gmail.com>; Chunyan Zhang <zhang.lyra@gmail.com>; Arn=
d
> > > Bergmann <arnd@arndb.de>; Linus Walleij <linus.walleij@linaro.org>; B=
aolin
> > > Wang <baolin.wang@linaro.org>; linux-mmc@vger.kernel.org; Linux Kerne=
l
> > > Mailing List <linux-kernel@vger.kernel.org>; dl-linux-imx <linux-imx@=
nxp.com>
> > > Subject: Re: [PATCH v9 0/5] Add MMC software queue support
> > >
> > > Hi Haibo.
> > >
> > > On Mon, Jun 8, 2020 at 2:35 PM BOUGH CHEN <haibo.chen@nxp.com> wrote:
> > > >
> > > > > -----Original Message-----
> > > > > From: linux-mmc-owner@vger.kernel.org
> > > > > [mailto:linux-mmc-owner@vger.kernel.org] On Behalf Of Baolin Wang
> > > > > Sent: 2020=E5=B9=B42=E6=9C=8819=E6=97=A5 9:35
> > > > > To: Ulf Hansson <ulf.hansson@linaro.org>
> > > > > Cc: Adrian Hunter <adrian.hunter@intel.com>; Asutosh Das
> > > > > <asutoshd@codeaurora.org>; Orson Zhai <orsonzhai@gmail.com>;
> > > Chunyan
> > > > > Zhang <zhang.lyra@gmail.com>; Arnd Bergmann <arnd@arndb.de>; Linu=
s
> > > > > Walleij <linus.walleij@linaro.org>; Baolin Wang
> > > > > <baolin.wang@linaro.org>; linux-mmc@vger.kernel.org; Linux Kernel
> > > > > Mailing List <linux-kernel@vger.kernel.org>
> > > > > Subject: Re: [PATCH v9 0/5] Add MMC software queue support
> > > > >
> > > > > On Wed, Feb 19, 2020 at 7:38 AM Ulf Hansson <ulf.hansson@linaro.o=
rg>
> > > > > wrote:
> > > > > >
> > > > > > On Wed, 12 Feb 2020 at 05:14, Baolin Wang <baolin.wang7@gmail.c=
om>
> > > > > wrote:
> > > > > > >
> > > > > > > Hi All,
> > > > > > >
> > > > > > > Now the MMC read/write stack will always wait for previous
> > > > > > > request is completed by mmc_blk_rw_wait(), before sending a n=
ew
> > > > > > > request to hardware, or queue a work to complete request, tha=
t
> > > > > > > will bring context switching overhead, especially for high I/=
O
> > > > > > > per second rates, to affect the IO performance.
> > > > > > >
> > > > > > > Thus this patch set will introduce the MMC software command
> > > > > > > queue support based on command queue engine's interfaces, and
> > > > > > > set the queue depth as 64 to allow more requests can be be
> > > > > > > prepared, merged and inserted into IO scheduler, but we only
> > > > > > > allow 2 requests in flight, that is enough to let the irq
> > > > > > > handler always trigger the next request without a context swi=
tch, as
> > > well as avoiding a long latency.
> > > > > > >
> > > > > > > Moreover we can expand the MMC software queue interface to
> > > > > > > support MMC packed request or packed command instead of addin=
g
> > > > > > > new interfaces, according to previosus discussion.
> > > > > > >
> > > > > > > Below are some comparison data with fio tool. The fio command=
 I
> > > > > > > used is like below with changing the '--rw' parameter and
> > > > > > > enabling the direct IO flag to measure the actual hardware
> > > > > > > transfer speed in 4K block
> > > > > size.
> > > > > > >
> > > > > > > ./fio --filename=3D/dev/mmcblk0p30 --direct=3D1 --iodepth=3D2=
0
> > > > > > > --rw=3Dread --bs=3D4K --size=3D1G --group_reporting --numjobs=
=3D20
> > > > > > > --name=3Dtest_read
> > > > > > >
> > > > > > > My eMMC card working at HS400 Enhanced strobe mode:
> > > > > > > [    2.229856] mmc0: new HS400 Enhanced strobe MMC card at
> > > address
> > > > > 0001
> > > > > > > [    2.237566] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB
> > > > > > > [    2.242621] mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.0=
0
> > > MiB
> > > > > > > [    2.249110] mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.0=
0
> > > MiB
> > > > > > > [    2.255307] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00
> > > MiB,
> > > > > chardev (248:0)
> > > > > > >
> > > > > > > 1. Without MMC software queue
> > > > > > > I tested 5 times for each case and output a average speed.
> > > > > > >
> > > > > > > 1) Sequential read:
> > > > > > > Speed: 59.4MiB/s, 63.4MiB/s, 57.5MiB/s, 57.2MiB/s, 60.8MiB/s
> > > > > > > Average
> > > > > > > speed: 59.66MiB/s
> > > > > > >
> > > > > > > 2) Random read:
> > > > > > > Speed: 26.9MiB/s, 26.9MiB/s, 27.1MiB/s, 27.1MiB/s, 27.2MiB/s
> > > > > > > Average
> > > > > > > speed: 27.04MiB/s
> > > > > > >
> > > > > > > 3) Sequential write:
> > > > > > > Speed: 71.6MiB/s, 72.5MiB/s, 72.2MiB/s, 64.6MiB/s, 67.5MiB/s
> > > > > > > Average
> > > > > > > speed: 69.68MiB/s
> > > > > > >
> > > > > > > 4) Random write:
> > > > > > > Speed: 36.3MiB/s, 35.4MiB/s, 38.6MiB/s, 34MiB/s, 35.5MiB/s
> > > > > > > Average
> > > > > > > speed: 35.96MiB/s
> > > > > > >
> > > > > > > 2. With MMC software queue
> > > > > > > I tested 5 times for each case and output a average speed.
> > > > > > >
> > > > > > > 1) Sequential read:
> > > > > > > Speed: 59.2MiB/s, 60.4MiB/s, 63.6MiB/s, 60.3MiB/s, 59.9MiB/s
> > > > > > > Average
> > > > > > > speed: 60.68MiB/s
> > > > > > >
> > > > > > > 2) Random read:
> > > > > > > Speed: 31.3MiB/s, 31.4MiB/s, 31.5MiB/s, 31.3MiB/s, 31.3MiB/s
> > > > > > > Average
> > > > > > > speed: 31.36MiB/s
> > > > > > >
> > > > > > > 3) Sequential write:
> > > > > > > Speed: 71MiB/s, 71.8MiB/s, 72.3MiB/s, 72.2MiB/s, 71MiB/s Aver=
age
> > > > > > > speed: 71.66MiB/s
> > > > > > >
> > > > > > > 4) Random write:
> > > > > > > Speed: 68.9MiB/s, 68.7MiB/s, 68.8MiB/s, 68.6MiB/s, 68.8MiB/s
> > > > > > > Average
> > > > > > > speed: 68.76MiB/s
> > > > > > >
> > > > > > > Form above data, we can see the MMC software queue can help t=
o
> > > > > > > improve some performance obviously for random read and write,
> > > > > > > though no obvious improvement for sequential read and write.
> > > > > > >
> > > > > > > Any comments are welcome. Thanks a lot.
> > > > > > >
> > > >
> > > > Hi Baolin,
> > > >
> > > > I refer to your code, and add the software queue support on i.MX ba=
sed on
> > > the Linux next-20200602, but unfortunately, I see an obvious performa=
nce drop
> > > when change to use software queue.
> > > > I test on our imx850-evk board, with eMMC soldered.
> > > > From the result listing below, only random write has a little perfo=
rmance
> > > improve, for others, seems performance drop a lot.
> > > > I noticed that, this software queue need no-removable card, any oth=
er
> > > limitation? For host?
> > > > From the code logic, software queue complete the request in irq han=
dler,
> > > seems no other change, I do not figure out why this will trigger a pe=
rformance
> > > drop on my platform. Any comment would be appreciate!
> > >
> > > Have you tested with below patches, which introduce an atomic_request=
 host
> > > ops to submit next request in the irq hard handler context to reduce =
latency?
> >
> > Hi Baolin,
> >
> > The Linux code base I use is Linux-next-20200602, which already contain=
 all the patch you listed, including the atomic_request.
> > I do not test the atomic_request alone. I just enable software queue, a=
nd this software queue use the atomic request.
> > So, do you mean, I need to first disable software queue, and just enabl=
e the atomic_request, to confirm whether the atomic_request has some perfor=
mance impact on my platform?
>
> NO, the HSQ will support  atomic_request ops, and I think you should
> implement the atomic_request ops in your driver if possible, like
> below patch:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit=
/?id=3D61ab64e2f54f4c607428667f83f411cb659843a3

Ah, sorry, I saw you've implemented the atomic_request ops. Moreover
I've tested the mainline, and I still got some performance
improvement.

What's the IO scheduler you selected?

>
> > > > Without software queue, normal read/write method:
> > > > Sequential read: 56MB/s
> > > > Random read: 23.5MB/s
> > > > Sequential write: 43.7MB/s
> > > > Random write: 19MB/s
> > > >
> > > > With mmc software queue:
> > > > Sequential read: 33.5MB/s
> > > > Random read: 18.7 MB/s
> > > > Sequential write: 37.7MB/s
> > > > Random write: 19.8MB/s
> > > >
> > > >
> > > > Here, I also list my change code to support software queue
> > > >
> > > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig in=
dex
> > > > eb85237bf2d6..996b8cc5c381 100644
> > > > --- a/drivers/mmc/host/Kconfig
> > > > +++ b/drivers/mmc/host/Kconfig
> > > > @@ -254,6 +254,7 @@ config MMC_SDHCI_ESDHC_IMX
> > > >         depends on MMC_SDHCI_PLTFM
> > > >         select MMC_SDHCI_IO_ACCESSORS
> > > >         select MMC_CQHCI
> > > > +       select MMC_HSQ
> > > >         help
> > > >           This selects the Freescale eSDHC/uSDHC controller support
> > > >           found on i.MX25, i.MX35 i.MX5x and i.MX6x.
> > > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > b/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > index 1d7f84b23a22..6f163695b08d 100644
> > > > --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> > > > @@ -29,6 +29,7 @@
> > > >  #include "sdhci-pltfm.h"
> > > >  #include "sdhci-esdhc.h"
> > > >  #include "cqhci.h"
> > > > +#include "mmc_hsq.h"
> > > >
> > > >  #define ESDHC_SYS_CTRL_DTOCV_MASK      0x0f
> > > >  #define        ESDHC_CTRL_D3CD                 0x08
> > > > @@ -1220,6 +1221,15 @@ static u32 esdhc_cqhci_irq(struct sdhci_host
> > > *host, u32 intmask)
> > > >         return 0;
> > > >  }
> > > >
> > > > +static void esdhc_request_done(struct sdhci_host *host, struct
> > > > +mmc_request *mrq) {
> > > > +       /* Validate if the request was from software queue firstly.=
 */
> > > > +       if (mmc_hsq_finalize_request(host->mmc, mrq))
> > > > +               return;
> > > > +
> > > > +       mmc_request_done(host->mmc, mrq); }
> > > > +
> > > >  static struct sdhci_ops sdhci_esdhc_ops =3D {
> > > >         .read_l =3D esdhc_readl_le,
> > > >         .read_w =3D esdhc_readw_le,
> > > > @@ -1237,6 +1247,7 @@ static struct sdhci_ops sdhci_esdhc_ops =3D {
> > > >         .set_uhs_signaling =3D esdhc_set_uhs_signaling,
> > > >         .reset =3D esdhc_reset,
> > > >         .irq =3D esdhc_cqhci_irq,
> > > > +       .request_done =3D esdhc_request_done,
> > > >  };
> > > >
> > > >  static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata =3D { @=
@
> > > > -1301,6 +1312,19 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci=
_host
> > > *host)
> > > >                         writel(tmp, host->ioaddr +
> > > ESDHC_VEND_SPEC2);
> > > >
> > > >                         host->quirks &=3D
> > > ~SDHCI_QUIRK_NO_BUSY_IRQ;
> > > > +
> > > > +                       /*
> > > > +                        * On i.MX8MM, we are running Dual Linux OS=
,
> > > with 1st Linux using SD Card
> > > > +                        * as rootfs storage, 2nd Linux using eMMC =
as
> > > rootfs storage. We let the
> > > > +                        * the 1st linux configure power/clock for =
the
> > > 2nd Linux.
> > > > +                        *
> > > > +                        * When the 2nd Linux is booting into rootf=
s
> > > stage, we let the 1st Linux
> > > > +                        * to destroy the 2nd linux, then restart t=
he
> > > 2nd linux, we met SDHCI dump.
> > > > +                        * After we clear the pending interrupt and=
 halt
> > > CQCTL, issue gone.
> > > > +                        */
> > > > +                       tmp =3D cqhci_readl(cq_host, CQHCI_IS);
> > > > +                       cqhci_writel(cq_host, tmp, CQHCI_IS);
> > > > +                       cqhci_writel(cq_host, CQHCI_HALT,
> > > CQHCI_CTL);
> > > >                 }
> > > >
> > > >                 if (imx_data->socdata->flags &
> > > ESDHC_FLAG_STD_TUNING)
> > > > { @@ -1351,9 +1375,6 @@ static void sdhci_esdhc_imx_hwinit(struct
> > > sdhci_host *host)
> > > >                  * After we clear the pending interrupt and halt CQ=
CTL,
> > > issue gone.
> > > >                  */
> > > >                 if (cq_host) {
> > > > -                       tmp =3D cqhci_readl(cq_host, CQHCI_IS);
> > > > -                       cqhci_writel(cq_host, tmp, CQHCI_IS);
> > > > -                       cqhci_writel(cq_host, CQHCI_HALT,
> > > CQHCI_CTL);
> > > >                 }
> > > >         }
> > > >  }
> > > > @@ -1555,6 +1576,7 @@ static int sdhci_esdhc_imx_probe(struct
> > > platform_device *pdev)
> > > >         struct sdhci_pltfm_host *pltfm_host;
> > > >         struct sdhci_host *host;
> > > >         struct cqhci_host *cq_host;
> > > > +       struct mmc_hsq *hsq;
> > > >         int err;
> > > >         struct pltfm_imx_data *imx_data;
> > > >
> > > > @@ -1664,6 +1686,16 @@ static int sdhci_esdhc_imx_probe(struct
> > > platform_device *pdev)
> > > >                 err =3D cqhci_init(cq_host, host->mmc, false);
> > > >                 if (err)
> > > >                         goto disable_ahb_clk;
> > > > +       } else if (esdhc_is_usdhc(imx_data)) {
> > > > +               hsq =3D devm_kzalloc(&pdev->dev, sizeof(*hsq),
> > > GFP_KERNEL);
> > > > +               if (!hsq) {
> > > > +                       err =3D -ENOMEM;
> > > > +                       goto disable_ahb_clk;
> > > > +               }
> > > > +
> > > > +               err =3D mmc_hsq_init(hsq, host->mmc);
> > > > +               if (err)
> > > > +                       goto disable_ahb_clk;
> > > >         }
> > > >
> > > >         if (of_id)
> > > > @@ -1673,6 +1705,11 @@ static int sdhci_esdhc_imx_probe(struct
> > > platform_device *pdev)
> > > >         if (err)
> > > >                 goto disable_ahb_clk;
> > > >
> > > > +       if (!mmc_card_is_removable(host->mmc))
> > > > +               host->mmc_host_ops.request_atomic =3D
> > > sdhci_request_atomic;
> > > > +       else
> > > > +               host->always_defer_done =3D true;
> > > > +
> > > >         sdhci_esdhc_imx_hwinit(host);
> > > >
> > > >         err =3D sdhci_add_host(host);
> > > > @@ -1737,6 +1774,8 @@ static int sdhci_esdhc_suspend(struct device
> > > *dev)
> > > >                 ret =3D cqhci_suspend(host->mmc);
> > > >                 if (ret)
> > > >                         return ret;
> > > > +       } else if (esdhc_is_usdhc(imx_data)) {
> > > > +               mmc_hsq_suspend(host->mmc);
> > > >         }
> > > >
> > > >         if ((imx_data->socdata->flags &
> > > > ESDHC_FLAG_STATE_LOST_IN_LPMODE) && @@ -1764,6 +1803,8 @@
> > > static int
> > > > sdhci_esdhc_suspend(struct device *dev)  static int
> > > > sdhci_esdhc_resume(struct device *dev)  {
> > > >         struct sdhci_host *host =3D dev_get_drvdata(dev);
> > > > +       struct sdhci_pltfm_host *pltfm_host =3D sdhci_priv(host);
> > > > +       struct pltfm_imx_data *imx_data =3D
> > > > + sdhci_pltfm_priv(pltfm_host);
> > > >         int ret;
> > > >
> > > >         ret =3D pinctrl_pm_select_default_state(dev);
> > > > @@ -1777,8 +1818,11 @@ static int sdhci_esdhc_resume(struct device
> > > *dev)
> > > >         if (ret)
> > > >                 return ret;
> > > >
> > > > -       if (host->mmc->caps2 & MMC_CAP2_CQE)
> > > > +       if (host->mmc->caps2 & MMC_CAP2_CQE) {
> > > >                 ret =3D cqhci_resume(host->mmc);
> > > > +       } else if (esdhc_is_usdhc(imx_data)) {
> > > > +               mmc_hsq_resume(host->mmc);
> > > > +       }
> > > >
> > > >         if (!ret)
> > > >                 ret =3D mmc_gpio_set_cd_wake(host->mmc, false); @@
> > > > -1799,6 +1843,8 @@ static int sdhci_esdhc_runtime_suspend(struct de=
vice
> > > *dev)
> > > >                 ret =3D cqhci_suspend(host->mmc);
> > > >                 if (ret)
> > > >                         return ret;
> > > > +       } else if (esdhc_is_usdhc(imx_data)) {
> > > > +               mmc_hsq_suspend(host->mmc);
> > > >         }
> > > >
> > > >         ret =3D sdhci_runtime_suspend_host(host); @@ -1851,8 +1897,=
11
> > > @@
> > > > static int sdhci_esdhc_runtime_resume(struct device *dev)
> > > >         if (err)
> > > >                 goto disable_ipg_clk;
> > > >
> > > > -       if (host->mmc->caps2 & MMC_CAP2_CQE)
> > > > +       if (host->mmc->caps2 & MMC_CAP2_CQE) {
> > > >                 err =3D cqhci_resume(host->mmc);
> > > > +       } else if (esdhc_is_usdhc(imx_data)) {
> > > > +               mmc_hsq_resume(host->mmc);
> > > > +       }
> > > >
> > > >         return err;
> > > >
> > > >
> > > >
> > > > > > > Changes from v8:
> > > > > > >  - Add more description in the commit message.
> > > > > > >  - Optimize the failure log when calling cqe_enable().
> > > > > > >
> > > > > > > Changes from v7:
> > > > > > >  - Add reviewed tag from Arnd.
> > > > > > >  - Use the 'hsq' acronym for varibles and functions in the co=
re layer.
> > > > > > >  - Check the 'card->ext_csd.cmdq_en' in cqhci.c to make sure =
the
> > > > > > > CQE can work normally.
> > > > > > >  - Add a new patch to enable the host software queue for the =
SD card.
> > > > > > >  - Use the default MMC queue depth for host software queue.
> > > > > > >
> > > > > > > Changes from v6:
> > > > > > >  - Change the patch order and set host->always_defer_done =3D=
 true
> > > > > > > for the  Spreadtrum host driver.
> > > > > > >
> > > > > > > Changes from v5:
> > > > > > >  - Modify the condition of defering to complete request
> > > > > > > suggested by
> > > > > Adrian.
> > > > > > >
> > > > > > > Changes from v4:
> > > > > > >  - Add a seperate patch to introduce a variable to defer to
> > > > > > > complete data requests for some host drivers, when using host
> > > software queue.
> > > > > > >
> > > > > > > Changes from v3:
> > > > > > >  - Use host software queue instead of sqhci.
> > > > > > >  - Fix random config building issue.
> > > > > > >  - Change queue depth to 32, but still only allow 2 requests =
in flight.
> > > > > > >  - Update the testing data.
> > > > > > >
> > > > > > > Changes from v2:
> > > > > > >  - Remove reference to 'struct cqhci_host' and 'struct
> > > > > > > cqhci_slot', instead adding 'struct sqhci_host', which is onl=
y used by
> > > software queue.
> > > > > > >
> > > > > > > Changes from v1:
> > > > > > >  - Add request_done ops for sdhci_ops.
> > > > > > >  - Replace virtual command queue with software queue for
> > > > > > > functions and  variables.
> > > > > > >  - Rename the software queue file and add sqhci.h header file=
.
> > > > > > >
> > > > > > > Baolin Wang (5):
> > > > > > >   mmc: Add MMC host software queue support
> > > > > > >   mmc: core: Enable the MMC host software queue for the SD ca=
rd
> > > > > > >   mmc: host: sdhci: Add request_done ops for struct sdhci_ops
> > > > > > >   mmc: host: sdhci: Add a variable to defer to complete reque=
sts if
> > > > > > >     needed
> > > > > > >   mmc: host: sdhci-sprd: Add software queue support
> > > > > > >
> > > > > > >  drivers/mmc/core/block.c      |   61 ++++++++
> > > > > > >  drivers/mmc/core/mmc.c        |   18 ++-
> > > > > > >  drivers/mmc/core/queue.c      |   22 ++-
> > > > > > >  drivers/mmc/core/sd.c         |   10 ++
> > > > > > >  drivers/mmc/host/Kconfig      |    8 +
> > > > > > >  drivers/mmc/host/Makefile     |    1 +
> > > > > > >  drivers/mmc/host/cqhci.c      |    8 +-
> > > > > > >  drivers/mmc/host/mmc_hsq.c    |  343
> > > > > +++++++++++++++++++++++++++++++++++++++++
> > > > > > >  drivers/mmc/host/mmc_hsq.h    |   30 ++++
> > > > > > >  drivers/mmc/host/sdhci-sprd.c |   28 ++++
> > > > > > >  drivers/mmc/host/sdhci.c      |   14 +-
> > > > > > >  drivers/mmc/host/sdhci.h      |    3 +
> > > > > > >  include/linux/mmc/host.h      |    3 +
> > > > > > >  13 files changed, 534 insertions(+), 15 deletions(-)  create
> > > > > > > mode
> > > > > > > 100644 drivers/mmc/host/mmc_hsq.c  create mode 100644
> > > > > > > drivers/mmc/host/mmc_hsq.h
> > > > > > >
> > > > > > > --
> > > > > > > 1.7.9.5
> > > > > > >
> > > > > >
> > > > > > Applied for next, thanks! Also, thanks for your patience while
> > > > > > moving forward during the reviews!
> > > > >
> > > > > I am very appreciated for you and Arnd's good sugestion when
> > > > > introducing the hsq.
> > > > >
> > > > > >
> > > > > > Note, I did some amending of patch1 to resolve some checkpatch
> > > > > > warnings. SPDX licence and Kconfig help texts, please have a lo=
ok
> > > > > > and tell if there are something that doesn't look good.
> > > > >
> > > > > Thanks for your help and looks good to me.
> > >
> > >
> > >
> > > --
> > > Baolin Wang
>
>
>
> --
> Baolin Wang


--=20
Baolin Wang