Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [RFC v2] hwmon: add Corsair Commander Pro driver
To:     Marius Zachmann <mail@mariuszachmann.de>
Cc:     jdelvare@suse.com, linux-hwmon@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
References: <4064217.uIqdvtiHzK@marius>
 <1bdfa5cb-ad9c-ab4c-351f-5b86d38c3eb8@roeck-us.net>
 <2951227.8AuJ4AEgc1@marius>
From:   Guenter Roeck <linux@roeck-us.net>
Autocrypt: addr=linux@roeck-us.net; keydata=
 xsFNBE6H1WcBEACu6jIcw5kZ5dGeJ7E7B2uweQR/4FGxH10/H1O1+ApmcQ9i87XdZQiB9cpN
 RYHA7RCEK2dh6dDccykQk3bC90xXMPg+O3R+C/SkwcnUak1UZaeK/SwQbq/t0tkMzYDRxfJ7
 nyFiKxUehbNF3r9qlJgPqONwX5vJy4/GvDHdddSCxV41P/ejsZ8PykxyJs98UWhF54tGRWFl
 7i1xvaDB9lN5WTLRKSO7wICuLiSz5WZHXMkyF4d+/O5ll7yz/o/JxK5vO/sduYDIlFTvBZDh
 gzaEtNf5tQjsjG4io8E0Yq0ViobLkS2RTNZT8ICq/Jmvl0SpbHRvYwa2DhNsK0YjHFQBB0FX
 IdhdUEzNefcNcYvqigJpdICoP2e4yJSyflHFO4dr0OrdnGLe1Zi/8Xo/2+M1dSSEt196rXaC
 kwu2KgIgmkRBb3cp2vIBBIIowU8W3qC1+w+RdMUrZxKGWJ3juwcgveJlzMpMZNyM1jobSXZ0
 VHGMNJ3MwXlrEFPXaYJgibcg6brM6wGfX/LBvc/haWw4yO24lT5eitm4UBdIy9pKkKmHHh7s
 jfZJkB5fWKVdoCv/omy6UyH6ykLOPFugl+hVL2Prf8xrXuZe1CMS7ID9Lc8FaL1ROIN/W8Vk
 BIsJMaWOhks//7d92Uf3EArDlDShwR2+D+AMon8NULuLBHiEUQARAQABzTJHdWVudGVyIFJv
 ZWNrIChMaW51eCBhY2NvdW50KSA8bGludXhAcm9lY2stdXMubmV0PsLBgQQTAQIAKwIbAwYL
 CQgHAwIGFQgCCQoLBBYCAwECHgECF4ACGQEFAlVcphcFCRmg06EACgkQyx8mb86fmYFg0RAA
 nzXJzuPkLJaOmSIzPAqqnutACchT/meCOgMEpS5oLf6xn5ySZkl23OxuhpMZTVX+49c9pvBx
 hpvl5bCWFu5qC1jC2eWRYU+aZZE4sxMaAGeWenQJsiG9lP8wkfCJP3ockNu0ZXXAXwIbY1O1
 c+l11zQkZw89zNgWgKobKzrDMBFOYtAh0pAInZ9TSn7oA4Ctejouo5wUugmk8MrDtUVXmEA9
 7f9fgKYSwl/H7dfKKsS1bDOpyJlqhEAH94BHJdK/b1tzwJCFAXFhMlmlbYEk8kWjcxQgDWMu
 GAthQzSuAyhqyZwFcOlMCNbAcTSQawSo3B9yM9mHJne5RrAbVz4TWLnEaX8gA5xK3uCNCeyI
 sqYuzA4OzcMwnnTASvzsGZoYHTFP3DQwf2nzxD6yBGCfwNGIYfS0i8YN8XcBgEcDFMWpOQhT
 Pu3HeztMnF3HXrc0t7e5rDW9zCh3k2PA6D2NV4fews9KDFhLlTfCVzf0PS1dRVVWM+4jVl6l
 HRIAgWp+2/f8dx5vPc4Ycp4IsZN0l1h9uT7qm1KTwz+sSl1zOqKD/BpfGNZfLRRxrXthvvY8
 BltcuZ4+PGFTcRkMytUbMDFMF9Cjd2W9dXD35PEtvj8wnEyzIos8bbgtLrGTv/SYhmPpahJA
 l8hPhYvmAvpOmusUUyB30StsHIU2LLccUPPOwU0ETofVZwEQALlLbQeBDTDbwQYrj0gbx3bq
 7kpKABxN2MqeuqGr02DpS9883d/t7ontxasXoEz2GTioevvRmllJlPQERVxM8gQoNg22twF7
 pB/zsrIjxkE9heE4wYfN1AyzT+AxgYN6f8hVQ7Nrc9XgZZe+8IkuW/Nf64KzNJXnSH4u6nJM
 J2+Dt274YoFcXR1nG76Q259mKwzbCukKbd6piL+VsT/qBrLhZe9Ivbjq5WMdkQKnP7gYKCAi
 pNVJC4enWfivZsYupMd9qn7Uv/oCZDYoBTdMSBUblaLMwlcjnPpOYK5rfHvC4opxl+P/Vzyz
 6WC2TLkPtKvYvXmdsI6rnEI4Uucg0Au/Ulg7aqqKhzGPIbVaL+U0Wk82nz6hz+WP2ggTrY1w
 ZlPlRt8WM9w6WfLf2j+PuGklj37m+KvaOEfLsF1v464dSpy1tQVHhhp8LFTxh/6RWkRIR2uF
 I4v3Xu/k5D0LhaZHpQ4C+xKsQxpTGuYh2tnRaRL14YMW1dlI3HfeB2gj7Yc8XdHh9vkpPyuT
 nY/ZsFbnvBtiw7GchKKri2gDhRb2QNNDyBnQn5mRFw7CyuFclAksOdV/sdpQnYlYcRQWOUGY
 HhQ5eqTRZjm9z+qQe/T0HQpmiPTqQcIaG/edgKVTUjITfA7AJMKLQHgp04Vylb+G6jocnQQX
 JqvvP09whbqrABEBAAHCwWUEGAECAA8CGwwFAlVcpi8FCRmg08MACgkQyx8mb86fmYHNRQ/+
 J0OZsBYP4leJvQF8lx9zif+v4ZY/6C9tTcUv/KNAE5leyrD4IKbnV4PnbrVhjq861it/zRQW
 cFpWQszZyWRwNPWUUz7ejmm9lAwPbr8xWT4qMSA43VKQ7ZCeTQJ4TC8kjqtcbw41SjkjrcTG
 wF52zFO4bOWyovVAPncvV9eGA/vtnd3xEZXQiSt91kBSqK28yjxAqK/c3G6i7IX2rg6pzgqh
 hiH3/1qM2M/LSuqAv0Rwrt/k+pZXE+B4Ud42hwmMr0TfhNxG+X7YKvjKC+SjPjqp0CaztQ0H
 nsDLSLElVROxCd9m8CAUuHplgmR3seYCOrT4jriMFBtKNPtj2EE4DNV4s7k0Zy+6iRQ8G8ng
 QjsSqYJx8iAR8JRB7Gm2rQOMv8lSRdjva++GT0VLXtHULdlzg8VjDnFZ3lfz5PWEOeIMk7Rj
 trjv82EZtrhLuLjHRCaG50OOm0hwPSk1J64R8O3HjSLdertmw7eyAYOo4RuWJguYMg5DRnBk
 WkRwrSuCn7UG+qVWZeKEsFKFOkynOs3pVbcbq1pxbhk3TRWCGRU5JolI4ohy/7JV1TVbjiDI
 HP/aVnm6NC8of26P40Pg8EdAhajZnHHjA7FrJXsy3cyIGqvg9os4rNkUWmrCfLLsZDHD8FnU
 mDW4+i+XlNFUPUYMrIKi9joBhu18ssf5i5Q=
Message-ID: <f078c0de-f66a-235a-b575-414a6b756786@roeck-us.net>
Date:   Mon, 15 Jun 2020 11:05:12 -0700
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.7.0
MIME-Version: 1.0
In-Reply-To: <2951227.8AuJ4AEgc1@marius>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 6/15/20 7:54 AM, Marius Zachmann wrote:
[ ... ]
>>> +	memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE);
>>> +	ccp->buffer[0] = CTL_SET_FAN_FPWM;
>>> +	ccp->buffer[1] = channel;
>>> +	ccp->buffer[2] = val;
>>
>> As it turns out (unless I am missing something), all commands have
>> one, two, or three parameters. Also, the full buffer is always
>> written. With that, it would be easier to add command, channel,
>> and value as parameters to send_usb_cmd() and handle both
>> memset() and assignments there.
>>
> 
> There is at least one command for setting a fan curve (0x25),
> which I intend to implement at a later point. It needs 27 bytes.
> There seem to be more long commands related to the RGB output.
> Also there is CTL_GET_FAN_CNCT which needs read 6 bytes of the
> response.
> 
In that case it might make sense to add a helper function to handle
_most_ of the commands. CTL_GET_FAN_CNCT can still be handled
with that helper function since the response is 6 bytes, not the
command itself.

>>> +	ret = send_usb_cmd(ccp);
>>> +
>>
>> This makes me wonder if reading a response is always necessary.
>> If not, it might make sense to add a flag to the function indicating
>> that no response is needed, and skip the read part there. If it is
>> needed, it might make sense to add a comment into the send function,
>> explaining that a read command must be executed even if no data is
>> returned.
>>
> 
> Actually yes. After a bit of further testing it seems, there is an
> error code in the first byte of the response, when sending invalid
> commands. I will check for it, return -EIO and log it, since I
> do not know, what all the error codes are.

Makes sense.

Thanks,
Guenter