Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Tue, 16 Jun 2020 09:02:54 +0200
From:   Krzysztof Kozlowski <krzk@kernel.org>
To:     Marek Szyprowski <m.szyprowski@samsung.com>
Cc:     linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
        Mark Brown <broonie@kernel.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Dmitry Osipenko <digetx@gmail.com>,
        Lucas Stach <l.stach@pengutronix.de>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Viresh Kumar <viresh.kumar@linaro.org>, peron.clem@gmail.com,
        Nishanth Menon <nm@ti.com>, Stephen Boyd <sboyd@kernel.org>,
        Vincent Guittot <vincent.guittot@linaro.org>,
        Rafael Wysocki <rjw@rjwysocki.net>,
        linux-samsung-soc@vger.kernel.org,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Saravana Kannan <saravanak@google.com>
Subject: Re: [PATCH RESEND v4] soc: samsung: Add simple voltage coupler for
 Exynos5800
Message-ID: <20200616070254.GA20282@kozik-lap>
References: <CGME20200616065834eucas1p268ef16744422664c783b17f0a18c53e2@eucas1p2.samsung.com>
 <20200616065821.29616-1-m.szyprowski@samsung.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20200616065821.29616-1-m.szyprowski@samsung.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, Jun 16, 2020 at 08:58:21AM +0200, Marek Szyprowski wrote:
> Add a simple custom voltage regulator coupler for Exynos5800 SoCs, which
> require coupling between "vdd_arm" and "vdd_int" regulators. This coupler
> ensures that the voltage values don't go below the bootloader-selected
> operation point during the boot process until a the clients sets their
> constraints. It is achieved by assuming minimal voltage value equal to
> the current value if no constraints are set. This also ensures proper
> voltage balancing if any of the client driver is missing.
> 
> The balancing code comes from the regulator/core.c with the additional
> logic for handling regulators without client constraints applied added.
> 
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>

Thanks, applied.

Best regards,
Krzysztof