Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Tue, 16 Jun 2020 13:38:49 -0700
From:   Matthias Kaehlcke <mka@chromium.org>
To:     "Sandeep Maheswaram (Temp)" <sanm@codeaurora.org>
Cc:     Stephen Boyd <swboyd@chromium.org>, Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Doug Anderson <dianders@chromium.org>,
        Felipe Balbi <balbi@kernel.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Manu Gautam <mgautam@codeaurora.org>,
        Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Subject: Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3
 driver
Message-ID: <20200616203849.GY4525@google.com>
References: <1585718145-29537-1-git-send-email-sanm@codeaurora.org>
 <1585718145-29537-3-git-send-email-sanm@codeaurora.org>
 <159120577830.69627.13288547914742515702@swboyd.mtv.corp.google.com>
 <d9ccf188-4f00-d3ac-ba0f-73f06c087553@codeaurora.org>
 <159126939154.69627.13027312816468830595@swboyd.mtv.corp.google.com>
 <20200615194239.GW4525@google.com>
 <3f8fcb0e-387d-e902-9f6b-1fde9d6ae404@codeaurora.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <3f8fcb0e-387d-e902-9f6b-1fde9d6ae404@codeaurora.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, Jun 16, 2020 at 10:22:47AM +0530, Sandeep Maheswaram (Temp) wrote:
> 
> On 6/16/2020 1:12 AM, Matthias Kaehlcke wrote:
> > On Thu, Jun 04, 2020 at 04:16:31AM -0700, Stephen Boyd wrote:
> > > Quoting Sandeep Maheswaram (Temp) (2020-06-04 02:43:09)
> > > > On 6/3/2020 11:06 PM, Stephen Boyd wrote:
> > > > > Quoting Sandeep Maheswaram (2020-03-31 22:15:43)
> > > > > > diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> > > > > > index 1dfd024..d33ae86 100644
> > > > > > --- a/drivers/usb/dwc3/dwc3-qcom.c
> > > > > > +++ b/drivers/usb/dwc3/dwc3-qcom.c
> > > > > > @@ -285,6 +307,101 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
> > > > > >           return 0;
> > > > > >    }
> > > > > > +
> > > > > > +/**
> > > > > > + * dwc3_qcom_interconnect_init() - Get interconnect path handles
> > > > > > + * @qcom:                      Pointer to the concerned usb core.
> > > > > > + *
> > > > > > + */
> > > > > > +static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
> > > > > > +{
> > > > > > +       struct device *dev = qcom->dev;
> > > > > > +       int ret;
> > > > > > +
> > > > > > +       if (!device_is_bound(&qcom->dwc3->dev))
> > > > > > +               return -EPROBE_DEFER;
> > > > > How is this supposed to work? I see that this was added in an earlier
> > > > > revision of this patch series but there isn't any mention of why
> > > > > device_is_bound() is used here. It would be great if there was a comment
> > > > > detailing why this is necessary. It sounds like maximum_speed is
> > > > > important?
> > > > > 
> > > > > Furthermore, dwc3_qcom_interconnect_init() is called by
> > > > > dwc3_qcom_probe() which is the function that registers the device for
> > > > > qcom->dwc3->dev. If that device doesn't probe between the time it is
> > > > > registered by dwc3_qcom_probe() and this function is called then we'll
> > > > > fail dwc3_qcom_probe() with -EPROBE_DEFER. And that will remove the
> > > > > qcom->dwc3->dev device from the platform bus because we call
> > > > > of_platform_depopulate() on the error path of dwc3_qcom_probe().
> > > > > 
> > > > > So isn't this whole thing racy and can potentially lead us to a driver
> > > > > probe loop where the wrapper (dwc3_qcom) and the core (dwc3) are probing
> > > > > and we're trying to time it just right so that driver for dwc3 binds
> > > > > before we setup interconnects? I don't know if dwc3 can communicate to
> > > > > the wrapper but that would be more of a direct way to do this. Or maybe
> > > > > the wrapper should try to read the DT property for maximum speed and
> > > > > fallback to a worst case high bandwidth value if it can't figure it out
> > > > > itself without help from dwc3 core.
> > > > > 
> > > > This was added in V4 to address comments from Matthias in V3
> > > > 
> > > > https://patchwork.kernel.org/patch/11148587/
> > > > 
> > > Yes, that why I said:
> > > 
> > > "I see that this was added in an earlier
> > >   revision of this patch series but there isn't any mention of why
> > >   device_is_bound() is used here. It would be great if there was a comment
> > >   detailing why this is necessary. It sounds like maximum_speed is
> > >   important?"
> > > 
> > > Can you please respond to the rest of my email?
> > I agree with Stephen that using device_is_bound() isn't a good option
> > in this case, when I suggested it I wasn't looking at the big picture
> > of how probing the core driver is triggered, sorry about that.
> > 
> > Reading the speed from the DT with usb_get_maximum_speed() as Stephen
> > suggests would be an option, the inconvenient is that we then
> > essentially require the property to be defined, while the core driver
> > gets a suitable value from hardware registers. Not sure if the wrapper
> > driver could read from the same registers.
> > 
> > One option could be to poll device_is_bound() for 100 ms (or so), with
> > sleeps between polls. It's not elegant but would probably work if we
> > don't find a better solution.
> if (np)
>         ret = dwc3_qcom_of_register_core(pdev);
>     else
>         ret = dwc3_qcom_acpi_register_core(pdev);
> 
>     if (ret) {
>         dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
>         goto depopulate;
>     }
> 
>     ret = dwc3_qcom_interconnect_init(qcom);
>     if (ret)
>         goto depopulate;
> 
>     qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
> 
> Before calling dwc3_qcom_interconnect_init we are checking
> 
>     if (ret) {
>         dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
>         goto depopulate;
>     }
> 
> Doesn't  this condition confirm the core driver is probed?

Not really:

// called under the hood by of_platform_populate()
static int really_probe(struct device *dev, struct device_driver *drv)
{
	...

	if (dev->bus->probe) {
		ret = dev->bus->probe(dev);
		if (ret)
			goto probe_failed;
	} else if (drv->probe) {
		ret = drv->probe(dev);
	        if (ret)
	       		goto probe_failed;
        }

	...

probe_failed:
	...

	/*
         * Ignore errors returned by ->probe so that the next driver can try
         * its luck.
         */
        ret = 0;

	...

	return ret;
}

As a result of_platform_populate() in dwc3_qcom_of_register_core()
returns 0 even when probing the device failed:

[    0.244339] dwc3-qcom a6f8800.usb: DBG: populate
[    0.244772] dwc3 a600000.dwc3: DBG: dwc3_probe
[    0.245237] dwc3 a600000.dwc3: DBG: dwc3_probe err: -517
[    0.245264] dwc3-qcom a6f8800.usb: DBG: populate (done)
[    0.245317] dwc3-qcom a6f8800.usb: DBG: dwc3_qcom_interconnect_init() failed: -517

Probe fails because the interconnect stuff isn't ready yet, otherwise
it could access invalid data.

A later _populate() is successful and the probing of the core is done
synchronously, i.e. after _populate() the core driver is fully
initialized:

[    3.898106] dwc3-qcom a6f8800.usb: DBG: populate
[    3.908356] dwc3 a600000.dwc3: DBG: dwc3_probe
[    4.205104] dwc3 a600000.dwc3: DBG: dwc3_probe (done)
[    4.210305] dwc3-qcom a6f8800.usb: DBG: populate (done)

The synchronous probing in _populate() suggests that using device_is_bound()
would actually be a valid option, either the core device was successfully
probed or not, there should be no race.

I sent a patch that adds this check to dwc3_qcom_of_register_core(), which
is less confusing and makes clear that the core device is valid unless
this function returns an error:

  https://lore.kernel.org/patchwork/patch/1257279/

It might make sense to add your "driver core:Export the symbol
device_is_bound" patch, mine and this one to a single series.

Thanks

Matthias