Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: QYsxM9WkPp3YQof9RyZjPIbLqtqTlwgtVZgBVZDqO1EEj5H5pu2MtbDvbqstmM0EBs6H4koDfV
 pFSd71/Hgkbw==
IronPort-SDR: P7JJITls+VcK+ReROrNmm5B8xeFakBdTNJba/+p5kSYiQ8bhLUnumWMWQPn7PtjJqWlQSCJ9vS
 8SNXjQn/doww==
From:   "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
To:     linux-kernel@vger.kernel.org, balbi@kernel.org, robh@kernel.org,
        p.zabel@pengutronix.de
Cc:     gregkh@linuxfoundation.org, devicetree@vger.kernel.org,
        linux-usb@vger.kernel.org, cheol.yong.kim@intel.com,
        qi-ming.wu@intel.com, yin1.li@intel.com,
        andriy.shevchenko@intel.com,
        "Ramuthevar,Vadivel MuruganX" 
        <vadivel.muruganx.ramuthevar@linux.intel.com>
Subject: [PATCH v4 0/2]usb : phy: Add USB PHY support on Intel LGM SoC
Date:   Wed, 17 Jun 2020 11:58:16 +0800
Message-Id: <20200617035818.54110-1-vadivel.muruganx.ramuthevar@linux.intel.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The USB PHY provides the optimized for low power dissipation while active, idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
---
v4:
  - Andy's review comments addressed
  - drop the excess error debug prints
  - error check optimized
  - merge the split line to one line
v3:
  - Andy's review comments update
  - hardcode return value changed to actual return value from the callee
  - add error check is fixed according to the above
  - correct the assignment in redundant
  - combine the split line into one line
v2:
  - Address Phillip's review comments
  - replace devm_reset_control_get() by devm_reset_control_get_exclusive()
  - re-design the assert and deassert fucntion calls as per review comments
  - address kbuild bot warnings
  - add the comments
v1:
  - initial version

---
dt-bindings: usb: Add USB PHY support for Intel LGM SoC
v4:
  - No Change
v3:
  - No Change
v2:
  - No Change
v1:
  - initial version
 

Ramuthevar Vadivel Murugan (2):
  dt-bindings: usb: Add USB PHY support for Intel LGM SoC
  usb: phy: Add USB3 PHY support for Intel LGM SoC

 .../devicetree/bindings/usb/intel,lgm-usb-phy.yaml |  53 ++++
 drivers/usb/phy/Kconfig                            |  11 +
 drivers/usb/phy/Makefile                           |   1 +
 drivers/usb/phy/phy-lgm-usb.c                      | 275 +++++++++++++++++++++
 4 files changed, 340 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/intel,lgm-usb-phy.yaml
 create mode 100644 drivers/usb/phy/phy-lgm-usb.c

-- 
2.11.0