Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1423025AbWCXEm0 (ORCPT ); Thu, 23 Mar 2006 23:42:26 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1423007AbWCXEmO (ORCPT ); Thu, 23 Mar 2006 23:42:14 -0500 Received: from mx.pathscale.com ([64.160.42.68]:25579 "EHLO mx.pathscale.com") by vger.kernel.org with ESMTP id S1423010AbWCXElx (ORCPT ); Thu, 23 Mar 2006 23:41:53 -0500 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [PATCH 6 of 18] ipath - chip initialisation code X-Mercurial-Node: 4a34e16a8d87c0f234c465c8b270fe78e6a20b5e Message-Id: <4a34e16a8d87c0f234c4.1143175298@eng-12.pathscale.com> In-Reply-To: Date: Thu, 23 Mar 2006 20:41:38 -0800 From: "Bryan O'Sullivan" To: akpm@osdl.org, greg@kroah.com, rdreier@cisco.com, linux-kernel@vger.kernel.org, openib-general@openib.org Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31917 Lines: 976 ipath_init_chip.c sets up an InfiniPath device for use. Signed-off-by: Bryan O'Sullivan diff -r 057022f0645a -r 4a34e16a8d87 drivers/infiniband/hw/ipath/ipath_init_chip.c --- /dev/null Thu Jan 1 00:00:00 1970 +0000 +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c Thu Mar 23 20:27:45 2006 -0800 @@ -0,0 +1,963 @@ +/* + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include + +#include "ipath_kernel.h" +#include "ips_common.h" + +/* + * min buffers we want to have per port, after driver + */ +#define IPATH_MIN_USER_PORT_BUFCNT 8 + +/* + * Number of ports we are configured to use (to allow for more pio + * buffers per port, etc.) Zero means use chip value. + */ +static ushort ipath_cfgports; + +module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO); +MODULE_PARM_DESC(cfgports, "Set max number of ports to use"); + +/* + * Number of buffers reserved for driver (layered drivers and SMA + * send). Reserved at end of buffer list. + */ +static ushort ipath_kpiobufs = 32; + +static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp); + +module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint, + &ipath_kpiobufs, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver"); + +/** + * create_port0_egr - allocate the eager TID buffers + * @dd: the infinipath device + * + * This code is now quite different for user and kernel, because + * the kernel uses skb's, for the accelerated network performance. + * This is the kernel (port0) version. + * + * Allocate the eager TID buffers and program them into infinipath. + * We use the network layer alloc_skb() allocator to allocate the + * memory, and either use the buffers as is for things like SMA + * packets, or pass the buffers up to the ipath layered driver and + * thence the network layer, replacing them as we do so (see + * ipath_rcv_layer()). + */ +static int create_port0_egr(struct ipath_devdata *dd) +{ + unsigned e, egrcnt; + struct sk_buff **skbs; + int ret; + + egrcnt = dd->ipath_rcvegrcnt; + + skbs = vmalloc(sizeof(*dd->ipath_port0_skbs) * egrcnt); + if (skbs == NULL) { + ipath_dev_err(dd, "allocation error for eager TID " + "skb array\n"); + ret = -ENOMEM; + goto bail; + } + for (e = 0; e < egrcnt; e++) { + /* + * This is a bit tricky in that we allocate extra + * space for 2 bytes of the 14 byte ethernet header. + * These two bytes are passed in the ipath header so + * the rest of the data is word aligned. We allocate + * 4 bytes so that the data buffer stays word aligned. + * See ipath_kreceive() for more details. + */ + skbs[e] = ipath_alloc_skb(dd, GFP_KERNEL); + if (!skbs[e]) { + ipath_dev_err(dd, "SKB allocation error for " + "eager TID %u\n", e); + while (e != 0) + dev_kfree_skb(skbs[--e]); + ret = -ENOMEM; + goto bail; + } + } + /* + * After loop above, so we can test non-NULL to see if ready + * to use at receive, etc. + */ + dd->ipath_port0_skbs = skbs; + + for (e = 0; e < egrcnt; e++) { + unsigned long phys = + virt_to_phys(dd->ipath_port0_skbs[e]->data); + dd->ipath_f_put_tid(dd, e + (u64 __iomem *) + ((char __iomem *) dd->ipath_kregbase + + dd->ipath_rcvegrbase), 0, phys); + } + + ret = 0; + +bail: + return ret; +} + +static int bringup_link(struct ipath_devdata *dd) +{ + u64 val, ibc; + int ret = 0; + + /* hold IBC in reset */ + dd->ipath_control &= ~INFINIPATH_C_LINKENABLE; + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control); + + /* + * Note that prior to try 14 or 15 of IB, the credit scaling + * wasn't working, because it was swapped for writes with the + * 1 bit default linkstate field + */ + + /* ignore pbc and align word */ + val = dd->ipath_piosize2k - 2 * sizeof(u32); + /* + * for ICRC, which we only send in diag test pkt mode, and we + * don't need to worry about that for mtu + */ + val += 1; + /* + * Set the IBC maxpktlength to the size of our pio buffers the + * maxpktlength is in words. This is *not* the IB data MTU. + */ + ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT; + /* in KB */ + ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT; + /* + * How often flowctrl sent. More or less in usecs; balance against + * watermark value, so that in theory senders always get a flow + * control update in time to not let the IB link go idle. + */ + ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT; + /* max error tolerance */ + ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT; + /* use "real" buffer space for */ + ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT; + /* IB credit flow control. */ + ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT; + /* initially come up waiting for TS1, without sending anything. */ + dd->ipath_ibcctrl = ibc; + /* + * Want to start out with both LINKCMD and LINKINITCMD in NOP + * (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that + * to stay a NOP + */ + ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE << + INFINIPATH_IBCC_LINKINITCMD_SHIFT; + ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n", + (unsigned long long) ibc); + ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc); + + // be sure chip saw it + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + + ret = dd->ipath_f_bringup_serdes(dd); + + if (ret) + dev_info(&dd->pcidev->dev, "Could not initialize SerDes, " + "not usable\n"); + else { + /* enable IBC */ + dd->ipath_control |= INFINIPATH_C_LINKENABLE; + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control); + } + + return ret; +} + +static int init_chip_first(struct ipath_devdata *dd, + struct ipath_portdata **pdp) +{ + struct ipath_portdata *pd = NULL; + int ret = 0; + u64 val; + + /* + * skip cfgports stuff because we are not allocating memory, + * and we don't want problems if the portcnt changed due to + * cfgports. We do still check and report a difference, if + * not same (should be impossible). + */ + dd->ipath_portcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); + if (!ipath_cfgports) + dd->ipath_cfgports = dd->ipath_portcnt; + else if (ipath_cfgports <= dd->ipath_portcnt) { + dd->ipath_cfgports = ipath_cfgports; + ipath_dbg("Configured to use %u ports out of %u in chip\n", + dd->ipath_cfgports, dd->ipath_portcnt); + } else { + dd->ipath_cfgports = dd->ipath_portcnt; + ipath_dbg("Tried to configured to use %u ports; chip " + "only supports %u\n", ipath_cfgports, + dd->ipath_portcnt); + } + dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_cfgports, + GFP_KERNEL); + + if (!dd->ipath_pd) { + ipath_dev_err(dd, "Unable to allocate portdata array, " + "failing\n"); + ret = -ENOMEM; + goto done; + } + + dd->ipath_lastegrheads = kzalloc(sizeof(*dd->ipath_lastegrheads) + * dd->ipath_cfgports, + GFP_KERNEL); + dd->ipath_lastrcvhdrqtails = + kzalloc(sizeof(*dd->ipath_lastrcvhdrqtails) + * dd->ipath_cfgports, GFP_KERNEL); + + if (!dd->ipath_lastegrheads || !dd->ipath_lastrcvhdrqtails) { + ipath_dev_err(dd, "Unable to allocate head arrays, " + "failing\n"); + ret = -ENOMEM; + goto done; + } + + dd->ipath_pd[0] = kzalloc(sizeof(*pd), GFP_KERNEL); + + if (!dd->ipath_pd[0]) { + ipath_dev_err(dd, "Unable to allocate portdata for port " + "0, failing\n"); + ret = -ENOMEM; + goto done; + } + pd = dd->ipath_pd[0]; + pd->port_dd = dd; + pd->port_port = 0; + pd->port_cnt = 1; + /* The port 0 pkey table is used by the layer interface. */ + pd->port_pkeys[0] = IPS_DEFAULT_P_KEY; + dd->ipath_rcvtidcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt); + dd->ipath_rcvtidbase = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase); + dd->ipath_rcvegrcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt); + dd->ipath_rcvegrbase = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase); + dd->ipath_palign = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign); + dd->ipath_piobufbase = + ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase); + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize); + dd->ipath_piosize2k = val & ~0U; + dd->ipath_piosize4k = val >> 32; + dd->ipath_ibmtu = 4096; /* default to largest legal MTU */ + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt); + dd->ipath_piobcnt2k = val & ~0U; + dd->ipath_piobcnt4k = val >> 32; + dd->ipath_pio2kbase = + (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) + + (dd->ipath_piobufbase & 0xffffffff)); + if (dd->ipath_piobcnt4k) { + dd->ipath_pio4kbase = (u32 __iomem *) + (((char __iomem *) dd->ipath_kregbase) + + (dd->ipath_piobufbase >> 32)); + /* + * 4K buffers take 2 pages; we use roundup just to be + * paranoid; we calculate it once here, rather than on + * ever buf allocate + */ + dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k, + dd->ipath_palign); + ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p " + "(%x aligned)\n", + dd->ipath_piobcnt2k, dd->ipath_piosize2k, + dd->ipath_pio2kbase, dd->ipath_piobcnt4k, + dd->ipath_piosize4k, dd->ipath_pio4kbase, + dd->ipath_4kalign); + } + else ipath_dbg("%u 2k piobufs @ %p\n", + dd->ipath_piobcnt2k, dd->ipath_pio2kbase); + + spin_lock_init(&dd->ipath_tid_lock); + +done: + *pdp = pd; + return ret; +} + +/** + * init_chip_reset - re-initialize after a reset, or enable + * @dd: the infinipath device + * @pdp: output for port data + * + * sanity check at least some of the values after reset, and + * ensure no receive or transmit (explictly, in case reset + * failed + */ +static int init_chip_reset(struct ipath_devdata *dd, + struct ipath_portdata **pdp) +{ + struct ipath_portdata *pd; + u32 rtmp; + + *pdp = pd = dd->ipath_pd[0]; + /* ensure chip does no sends or receives while we re-initialize */ + dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U; + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, 0); + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0); + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0); + + rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); + if (dd->ipath_portcnt != rtmp) + dev_info(&dd->pcidev->dev, "portcnt was %u before " + "reset, now %u, using original\n", + dd->ipath_portcnt, rtmp); + rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt); + if (rtmp != dd->ipath_rcvtidcnt) + dev_info(&dd->pcidev->dev, "tidcnt was %u before " + "reset, now %u, using original\n", + dd->ipath_rcvtidcnt, rtmp); + rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase); + if (rtmp != dd->ipath_rcvtidbase) + dev_info(&dd->pcidev->dev, "tidbase was %u before " + "reset, now %u, using original\n", + dd->ipath_rcvtidbase, rtmp); + rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt); + if (rtmp != dd->ipath_rcvegrcnt) + dev_info(&dd->pcidev->dev, "egrcnt was %u before " + "reset, now %u, using original\n", + dd->ipath_rcvegrcnt, rtmp); + rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase); + if (rtmp != dd->ipath_rcvegrbase) + dev_info(&dd->pcidev->dev, "egrbase was %u before " + "reset, now %u, using original\n", + dd->ipath_rcvegrbase, rtmp); + + return 0; +} + +static int init_pioavailregs(struct ipath_devdata *dd) +{ + int ret; + + dd->ipath_pioavailregs_dma = dma_alloc_coherent( + &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys, + GFP_KERNEL); + if (!dd->ipath_pioavailregs_dma) { + ipath_dev_err(dd, "failed to allocate PIOavail reg area " + "in memory\n"); + ret = -ENOMEM; + goto done; + } + + /* + * we really want L2 cache aligned, but for current CPUs of + * interest, they are the same. + */ + dd->ipath_statusp = (u64 *) + ((char *)dd->ipath_pioavailregs_dma + + ((2 * L1_CACHE_BYTES + + dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES)); + /* copy the current value now that it's really allocated */ + *dd->ipath_statusp = dd->_ipath_status; + /* + * setup buffer to hold freeze msg, accessible to apps, + * following statusp + */ + dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1]; + /* and its length */ + dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]); + + if (dd->ipath_unit * 64 > (IPATH_PORT0_RCVHDRTAIL_SIZE - 64)) { + ipath_dev_err(dd, "unit %u too large for port 0 " + "rcvhdrtail buffer size\n", dd->ipath_unit); + ret = -ENODEV; + } + else + ret = 0; + + /* so we can get current tail in ipath_kreceive(), per chip */ + dd->ipath_hdrqtailptr = &ipath_port0_rcvhdrtail[ + dd->ipath_unit * (64 / sizeof(*ipath_port0_rcvhdrtail))]; +done: + return ret; +} + +/** + * init_shadow_tids - allocate the shadow TID array + * @dd: the infinipath device + * + * allocate the shadow TID array, so we can ipath_munlock previous + * entries. It may make more sense to move the pageshadow to the + * port data structure, so we only allocate memory for ports actually + * in use, since we at 8k per port, now. + */ +static void init_shadow_tids(struct ipath_devdata *dd) +{ + dd->ipath_pageshadow = (struct page **) + vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt * + sizeof(struct page *)); + if (!dd->ipath_pageshadow) + ipath_dev_err(dd, "failed to allocate shadow page * " + "array, no expected sends!\n"); + else + memset(dd->ipath_pageshadow, 0, + dd->ipath_cfgports * dd->ipath_rcvtidcnt * + sizeof(struct page *)); +} + +static void enable_chip(struct ipath_devdata *dd, + struct ipath_portdata *pd, int reinit) +{ + u32 val; + int i; + + if (!reinit) { + init_waitqueue_head(&ipath_sma_wait); + init_waitqueue_head(&ipath_sma_state_wait); + } + + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + + /* Enable PIO send, and update of PIOavail regs to memory. */ + dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE | + INFINIPATH_S_PIOBUFAVAILUPD; + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + dd->ipath_sendctrl); + + /* + * enable port 0 receive, and receive interrupt. other ports + * done as user opens and inits them. + */ + dd->ipath_rcvctrl = INFINIPATH_R_TAILUPD | + (1ULL << INFINIPATH_R_PORTENABLE_SHIFT) | + (1ULL << INFINIPATH_R_INTRAVAIL_SHIFT); + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, + dd->ipath_rcvctrl); + + /* + * now ready for use. this should be cleared whenever we + * detect a reset, or initiate one. + */ + dd->ipath_flags |= IPATH_INITTED; + + /* + * init our shadow copies of head from tail values, and write + * head values to match. + */ + val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0); + (void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0); + dd->ipath_port0head = ipath_read_ureg32(dd, ur_rcvhdrtail, 0); + + /* Initialize so we interrupt on next packet received */ + (void)ipath_write_ureg(dd, ur_rcvhdrhead, + dd->ipath_rhdrhead_intr_off | + dd->ipath_port0head, 0); + + /* + * by now pioavail updates to memory should have occurred, so + * copy them into our working/shadow registers; this is in + * case something went wrong with abort, but mostly to get the + * initial values of the generation bit correct. + */ + for (i = 0; i < dd->ipath_pioavregs; i++) { + __le64 val; + + /* + * Chip Errata bug 6641; even and odd qwords>3 are swapped. + */ + if (i > 3) { + if (i & 1) + val = dd->ipath_pioavailregs_dma[i - 1]; + else + val = dd->ipath_pioavailregs_dma[i + 1]; + } + else + val = dd->ipath_pioavailregs_dma[i]; + dd->ipath_pioavailshadow[i] = __le64_to_cpu(val); + } + /* can get counters, stats, etc. */ + dd->ipath_flags |= IPATH_PRESENT; +} + +static int init_housekeeping(struct ipath_devdata *dd, + struct ipath_portdata **pdp, int reinit) +{ + char boardn[32]; + int ret = 0; + + /* + * have to clear shadow copies of registers at init that are + * not otherwise set here, or all kinds of bizarre things + * happen with driver on chip reset + */ + dd->ipath_rcvhdrsize = 0; + + /* + * Don't clear ipath_flags as 8bit mode was set before + * entering this func. However, we do set the linkstate to + * unknown, so we can watch for a transition. + */ + dd->ipath_flags |= IPATH_LINKUNK; + dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED | + IPATH_LINKDOWN | IPATH_LINKINIT); + + ipath_cdbg(VERBOSE, "Try to read spc chip revision\n"); + dd->ipath_revision = + ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision); + + /* + * set up fundamental info we need to use the chip; we assume + * if the revision reg and these regs are OK, we don't need to + * special case the rest + */ + dd->ipath_sregbase = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase); + dd->ipath_cregbase = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase); + dd->ipath_uregbase = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase); + ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, " + "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase, + dd->ipath_uregbase, dd->ipath_cregbase); + if ((dd->ipath_revision & 0xffffffff) == 0xffffffff + || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff + || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff + || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) { + ipath_dev_err(dd, "Register read failures from chip, " + "giving up initialization\n"); + ret = -ENODEV; + goto done; + } + + /* clear the initial reset flag, in case first driver load */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, + INFINIPATH_E_RESET); + + if (reinit) + ret = init_chip_reset(dd, pdp); + else + ret = init_chip_first(dd, pdp); + + if (ret) + goto done; + + ipath_cdbg(VERBOSE, "Revision %llx (PCI %x), %u ports, %u tids, " + "%u egrtids\n", (unsigned long long) dd->ipath_revision, + dd->ipath_pcirev, dd->ipath_portcnt, dd->ipath_rcvtidcnt, + dd->ipath_rcvegrcnt); + + if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) & + INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) { + ipath_dev_err(dd, "Driver only handles version %d, " + "chip swversion is %d (%llx), failng\n", + IPATH_CHIP_SWVERSION, + (int)(dd->ipath_revision >> + INFINIPATH_R_SOFTWARE_SHIFT) & + INFINIPATH_R_SOFTWARE_MASK, + (unsigned long long) dd->ipath_revision); + ret = -ENOSYS; + goto done; + } + dd->ipath_majrev = (u8) ((dd->ipath_revision >> + INFINIPATH_R_CHIPREVMAJOR_SHIFT) & + INFINIPATH_R_CHIPREVMAJOR_MASK); + dd->ipath_minrev = (u8) ((dd->ipath_revision >> + INFINIPATH_R_CHIPREVMINOR_SHIFT) & + INFINIPATH_R_CHIPREVMINOR_MASK); + dd->ipath_boardrev = (u8) ((dd->ipath_revision >> + INFINIPATH_R_BOARDID_SHIFT) & + INFINIPATH_R_BOARDID_MASK); + + ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn); + + snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion), + "Driver %u.%u, %s, InfiniPath%u %u.%u, PCI %u, " + "SW Compat %u\n", + IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn, + (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) & + INFINIPATH_R_ARCH_MASK, + dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev, + (unsigned)(dd->ipath_revision >> + INFINIPATH_R_SOFTWARE_SHIFT) & + INFINIPATH_R_SOFTWARE_MASK); + + ipath_dbg("%s", dd->ipath_boardversion); + +done: + return ret; +} + + +/** + * ipath_init_chip - do the actual initialization sequence on the chip + * @dd: the infinipath device + * @reinit: reinitializing, so don't allocate new memory + * + * Do the actual initialization sequence on the chip. This is done + * both from the init routine called from the PCI infrastructure, and + * when we reset the chip, or detect that it was reset internally, + * or it's administratively re-enabled. + * + * Memory allocation here and in called routines is only done in + * the first case (reinit == 0). We have to be careful, because even + * without memory allocation, we need to re-write all the chip registers + * TIDs, etc. after the reset or enable has completed. + */ +int ipath_init_chip(struct ipath_devdata *dd, int reinit) +{ + int ret = 0, i; + u32 val32, kpiobufs; + u64 val, atmp; + struct ipath_portdata *pd = NULL; /* keep gcc4 happy */ + + ret = init_housekeeping(dd, &pd, reinit); + if (ret) + goto done; + + /* + * we ignore most issues after reporting them, but have to specially + * handle hardware-disabled chips. + */ + if (ret == 2) { + /* unique error, known to ipath_init_one */ + ret = -EPERM; + goto done; + } + + /* + * We could bump this to allow for full rcvegrcnt + rcvtidcnt, + * but then it no longer nicely fits power of two, and since + * we now use routines that backend onto __get_free_pages, the + * rest would be wasted. + */ + dd->ipath_rcvhdrcnt = dd->ipath_rcvegrcnt; + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt, + dd->ipath_rcvhdrcnt); + + /* + * Set up the shadow copies of the piobufavail registers, + * which we compare against the chip registers for now, and + * the in memory DMA'ed copies of the registers. This has to + * be done early, before we calculate lastport, etc. + */ + val = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k; + /* + * calc number of pioavail registers, and save it; we have 2 + * bits per buffer. + */ + dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2) + / (sizeof(u64) * BITS_PER_BYTE / 2); + if (!ipath_kpiobufs) /* have to have at least 1, for SMA */ + kpiobufs = ipath_kpiobufs = 1; + else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) < + (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) { + dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) " + "for %u ports to have %u each!\n", + dd->ipath_piobcnt2k + dd->ipath_piobcnt4k, + dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT); + kpiobufs = 1; /* reserve just the minimum for SMA/ether */ + } else + kpiobufs = ipath_kpiobufs; + + if (kpiobufs > + (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - + (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT))) { + i = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - + (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT); + if (i < 0) + i = 0; + dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs for " + "kernel leaves too few for %d user ports " + "(%d each); using %u\n", kpiobufs, + dd->ipath_cfgports - 1, + IPATH_MIN_USER_PORT_BUFCNT, i); + /* + * shouldn't change ipath_kpiobufs, because could be + * different for different devices... + */ + kpiobufs = i; + } + dd->ipath_lastport_piobuf = + dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - kpiobufs; + dd->ipath_pbufsport = dd->ipath_cfgports > 1 + ? dd->ipath_lastport_piobuf / (dd->ipath_cfgports - 1) + : 0; + val32 = dd->ipath_lastport_piobuf - + (dd->ipath_pbufsport * (dd->ipath_cfgports - 1)); + if (val32 > 0) { + ipath_dbg("allocating %u pbufs/port leaves %u unused, " + "add to kernel\n", dd->ipath_pbufsport, val32); + dd->ipath_lastport_piobuf -= val32; + ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n", + dd->ipath_pbufsport, val32); + } + dd->ipath_lastpioindex = dd->ipath_lastport_piobuf; + ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u " + "each for %u user ports\n", kpiobufs, + dd->ipath_piobcnt2k + dd->ipath_piobcnt4k, + dd->ipath_pbufsport, dd->ipath_cfgports - 1); + + dd->ipath_f_early_init(dd); + + /* early_init sets rcvhdrentsize and rcvhdrsize, so this must be + * done after early_init */ + dd->ipath_hdrqlast = + dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1); + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize, + dd->ipath_rcvhdrentsize); + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize, + dd->ipath_rcvhdrsize); + + if (!reinit) { + ret = init_pioavailregs(dd); + init_shadow_tids(dd); + if (ret) + goto done; + } + + (void)ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr, + dd->ipath_pioavailregs_phys); + /* + * this is to detect s/w errors, which the h/w works around by + * ignoring the low 6 bits of address, if it wasn't aligned. + */ + val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr); + if (val != dd->ipath_pioavailregs_phys) { + ipath_dev_err(dd, "Catastrophic software error, " + "SendPIOAvailAddr written as %lx, " + "read back as %llx\n", + (unsigned long) dd->ipath_pioavailregs_phys, + (unsigned long long) val); + ret = -EINVAL; + goto done; + } + + val = ipath_port0_rcvhdrtail_dma + dd->ipath_unit * 64; + + /* verify that the alignment requirement was met */ + ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr, + 0, val); + atmp = ipath_read_kreg64_port( + dd, dd->ipath_kregs->kr_rcvhdrtailaddr, 0); + if (val != atmp) { + ipath_dev_err(dd, "Catastrophic software error, " + "RcvHdrTailAddr0 written as %llx, " + "read back as %llx from %x\n", + (unsigned long long) val, + (unsigned long long) atmp, + dd->ipath_kregs->kr_rcvhdrtailaddr); + ret = -EINVAL; + goto done; + } + + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP); + + /* + * make sure we are not in freeze, and PIO send enabled, so + * writes to pbc happen + */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL); + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, + ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED); + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL); + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + INFINIPATH_S_PIOENABLE); + + /* + * before error clears, since we expect serdes pll errors during + * this, the first time after reset + */ + if (bringup_link(dd)) { + dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n"); + ret = -ENETDOWN; + goto done; + } + + /* + * clear any "expected" hwerrs from reset and/or initialization + * clear any that aren't enabled (at least this once), and then + * set the enable mask + */ + dd->ipath_f_init_hwerrors(dd); + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, + ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED); + ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, + dd->ipath_hwerrmask); + + dd->ipath_maskederrs = dd->ipath_ignorederrs; + /* clear all */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL); + /* enable errors that are masked, at least this first time. */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, + ~dd->ipath_maskederrs); + /* clear any interrups up to this point (ints still not enabled) */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL); + + ipath_stats.sps_lid[dd->ipath_unit] = dd->ipath_lid; + + /* + * Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing + * re-init, the simplest way to handle this is to free + * existing, and re-allocate. + */ + if (reinit) + ipath_free_pddata(dd, 0, 0); + dd->ipath_f_tidtemplate(dd); + ret = ipath_create_rcvhdrq(dd, pd); + if (!ret) + ret = create_port0_egr(dd); + if (ret) + ipath_dev_err(dd, "failed to allocate port 0 (kernel) " + "rcvhdrq and/or egr bufs\n"); + else + enable_chip(dd, pd, reinit); + + /* + * cause retrigger of pending interrupts ignored during init, + * even if we had errors + */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL); + + if(!dd->ipath_stats_timer_active) { + /* + * first init, or after an admin disable/enable + * set up stats retrieval timer, even if we had errors + * in last portion of setup + */ + init_timer(&dd->ipath_stats_timer); + dd->ipath_stats_timer.function = ipath_get_faststats; + dd->ipath_stats_timer.data = (unsigned long) dd; + /* every 5 seconds; */ + dd->ipath_stats_timer.expires = jiffies + 5 * HZ; + /* takes ~16 seconds to overflow at full IB 4x bandwdith */ + add_timer(&dd->ipath_stats_timer); + dd->ipath_stats_timer_active = 1; + } + +done: + if (!ret) { + ipath_get_guid(dd); + *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT; + if (!ipath_sma_data_spare) { + /* + * first init, setup SMA data structs + */ + ipath_sma_data_spare = + ipath_sma_data_bufs[IPATH_NUM_SMA_PKTS]; + for (i = 0; i < IPATH_NUM_SMA_PKTS; i++) + ipath_sma_data[i].buf = + ipath_sma_data_bufs[i]; + } + if (!dd->ipath_f_intrsetup(dd)) { + /* now we can enable all interrupts from the chip */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, + -1LL); + /* force re-interrupt of any pending interrupts. */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, + 0ULL); + /* chip is usable; mark it as initialized */ + *dd->ipath_statusp |= IPATH_STATUS_INITTED; + } else + ipath_dev_err(dd, "No interrupts enabled, couldn't " + "setup interrupt address\n"); + + if (dd->ipath_cfgports > ipath_stats.sps_nports) + /* + * sps_nports is a global, so, we set it to + * the highest number of ports of any of the + * chips we find; we never decrement it, at + * least for now. Since this might have changed + * over disable/enable or prior to reset, always + * do the check and potentially adjust. + */ + ipath_stats.sps_nports = dd->ipath_cfgports; + } else + ipath_dbg("Failed (%d) to initialize chip\n", ret); + + /* if ret is non-zero, we probably should do some cleanup + here... */ + return ret; +} + +static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp) +{ + struct ipath_devdata *dd; + unsigned long flags; + unsigned short val; + int ret; + + ret = ipath_parse_ushort(str, &val); + + spin_lock_irqsave(&ipath_devs_lock, flags); + + if (ret < 0) + goto bail; + + if (val == 0) { + ret = -EINVAL; + goto bail; + } + + list_for_each_entry(dd, &ipath_dev_list, ipath_list) { + if (dd->ipath_kregbase) + continue; + if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - + (dd->ipath_cfgports * + IPATH_MIN_USER_PORT_BUFCNT))) + { + ipath_dev_err( + dd, + "Allocating %d PIO bufs for kernel leaves " + "too few for %d user ports (%d each)\n", + val, dd->ipath_cfgports - 1, + IPATH_MIN_USER_PORT_BUFCNT); + ret = -EINVAL; + goto bail; + } + dd->ipath_lastport_piobuf = + dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val; + } + + ret = 0; +bail: + spin_unlock_irqrestore(&ipath_devs_lock, flags); + + return ret; +} - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/