Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc:     linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        narmstrong@baylibre.com,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH] arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings
Date:   Sat, 20 Jun 2020 18:12:11 +0200
Message-Id: <20200620161211.23685-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The "amlogic,meson-gx-pwrc-vpu" binding only supports the VPU power
domain, while actually there are more power domains behind that set of
registers. Switch to the new bindings so we can add more power domains
as needed.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi   | 18 ++++++++++--------
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi |  7 +++++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  |  7 +++++--
 3 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index ba63c36b22e0..0edd137151f8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -60,7 +61,7 @@ simplefb_cvbs: framebuffer-cvbs {
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-cvbs";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 
@@ -68,7 +69,7 @@ simplefb_hdmi: framebuffer-hdmi {
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-hdmi";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 	};
@@ -438,12 +439,6 @@ sysctrl_AO: sys-ctrl@0 {
 				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 				reg =  <0x0 0x0 0x0 0x100>;
 
-				pwrc_vpu: power-controller-vpu {
-					compatible = "amlogic,meson-gx-pwrc-vpu";
-					#power-domain-cells = <0>;
-					amlogic,hhi-sysctrl = <&sysctrl>;
-				};
-
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-gx-aoclkc";
 					#clock-cells = <1>;
@@ -552,6 +547,12 @@ hiubus: bus@c883c000 {
 			sysctrl: system-controller@0 {
 				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
 			};
 
 			mailbox: mailbox@404 {
@@ -574,6 +575,7 @@ ethmac: ethernet@c9410000 {
 			interrupt-names = "macirq";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 03c25b9facff..ea50dd434887 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -748,7 +748,7 @@ mux {
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -761,6 +761,9 @@ &pwrc_vpu {
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -867,7 +870,7 @@ &uart_C {
 
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 60484bbc7272..beb5fc79d186 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -783,7 +783,7 @@ external_mdio: mdio@2009087f {
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -796,6 +796,9 @@ &pwrc_vpu {
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -902,7 +905,7 @@ &uart_C {
 
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
-- 
2.27.0