Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932270AbWC0AdY (ORCPT ); Sun, 26 Mar 2006 19:33:24 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932273AbWC0AdY (ORCPT ); Sun, 26 Mar 2006 19:33:24 -0500 Received: from smtp1.Stanford.EDU ([171.67.16.123]:52427 "EHLO smtp1.Stanford.EDU") by vger.kernel.org with ESMTP id S932270AbWC0AdX (ORCPT ); Sun, 26 Mar 2006 19:33:23 -0500 Subject: Re: 2.6.15-rt21, BUG at net/ipv4/netfilter/ip_conntrack_core.c:124 From: Fernando Lopez-Lezcano To: Ingo Molnar Cc: nando@ccrma.Stanford.EDU, linux-kernel@vger.kernel.org In-Reply-To: <20060326231913.GA18750@elte.hu> References: <1143339628.5527.3.camel@cmn2.stanford.edu> <20060326163056.GC15667@elte.hu> <20060326163450.GA22411@elte.hu> <1143404146.7768.18.camel@cmn3.stanford.edu> <20060326231913.GA18750@elte.hu> Content-Type: multipart/mixed; boundary="=-XPiqtSGJLhncObNTba8R" Date: Sun, 26 Mar 2006 16:33:15 -0800 Message-Id: <1143419595.5404.5.camel@cmn2.stanford.edu> Mime-Version: 1.0 X-Mailer: Evolution 2.2.3 (2.2.3-2.fc4) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24425 Lines: 502 --=-XPiqtSGJLhncObNTba8R Content-Type: text/plain Content-Transfer-Encoding: 7bit On Mon, 2006-03-27 at 01:19 +0200, Ingo Molnar wrote: > * Fernando Lopez-Lezcano wrote: > > > On Sun, 2006-03-26 at 18:34 +0200, Ingo Molnar wrote: > > > * Ingo Molnar wrote: > > > > > > > > Mar 23 15:22:48 host kernel: BUG at > > > > > net/ipv4/netfilter/ip_conntrack_core.c:124! > > > > > > > > does the patch below help? > > > > > > updated patch below. > > > > Thanks! I'll test later today. It may take a while to be reasonably > > sure whether it makes a difference. The hangs have not been frequent. > > > > If I try a 2.6.16 based kernel, should I also use this patch? > > not needed - it's included in -rt10. (-rt9 had it too but was buggy) Oh well, I just experienced another complete hang, no traces left behind, reset button was the only option :-( So most probably this problem is unrelated to your fix. I'm including a dmesg of the successful reboot just in case there is something there of use (I only had to apply one chunk of your fix to arp_tables.c, the other raw_* was already there, maybe included in 2.6.15.6?). Maybe I'll have to try 2.6.16... -- Fernando --=-XPiqtSGJLhncObNTba8R Content-Disposition: attachment; filename=dmesg Content-Type: text/plain; name=dmesg; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Linux version 2.6.15-1.1833.5.rrt.rhfc4.ccrmasmp (machbuild@planetforge.stanford.edu) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP PREEMPT Sun Mar 26 16:10:21 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4ee0 NX (Execute Disable) protection: active On node 0 totalpages: 524272 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294896 pages, LIFO batch:31 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 Nvidia ) @ 0x000f6a20 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff78c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC enabled (0). ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs LAPIC enabled (0), calling get_smp_config Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) Detected 2210.745 MHz processor. Real-Time Preemption Support (C) 2004-2005 Ingo Molnar Built 1 zonelists Kernel command line: ro root=LABEL=/1 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 WARNING: experimental RCU implementation. CPU 0 irqstacks, hard=c0475000 soft=c0455000 PID hash table entries: 4096 (order: 12, 65536 bytes) Event source pit installed with caps set: 01 Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2057696k/2097088k available (2271k kernel code, 39004k reserved, 875k data, 232k init, 1179584k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4422.77 BogoMIPS (lpj=2211387) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0476000 soft=c0456000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4420.89 BogoMIPS (lpj=2210446) CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02 Total of 2 processors activated (8843.66 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Event source lapic installed with caps set: 06 checking TSC synchronization across 2 CPUs: failed. starting TSC synchronization TSC synchronization complete max_delta=0 cycles TSC sync round-trip time 0.225 microseconds Event source lapic installed with caps set: 06 Brought up 2 CPUs checking if image is initramfs... it is Freeing initrd memory: 1175k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:00: ioport range 0x1000-0x107f could not be reserved pnp: 00:00: ioport range 0x1080-0x10ff has been reserved pnp: 00:00: ioport range 0x1400-0x147f has been reserved pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved pnp: 00:00: ioport range 0x1800-0x187f has been reserved pnp: 00:00: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:0b.0 IO window: 8000-8fff MEM window: f2000000-f3ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:0e.0 IO window: 9000-afff MEM window: f4000000-f5ffffff PREFETCH window: 88000000-880fffff PCI: Setting latency timer of device 0000:00:0e.0 to 64 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1143390143.028:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 3FD05D7BD6CB3BE4 - key was been created 15969 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: AGP aperture is 32M @ 0xf0000000 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SONY DVD RW DW-Q28A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 65536 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 232k freed Write protecting the kernel read-only data: 354k Time: tsc clocksource has been installed. hrtimers: Switched to high resolution mode CPU 1 hrtimers: Switched to high resolution mode CPU 0 SCSI subsystem initialized libata version 1.20 loaded. sata_sil 0000:02:0d.0: version 0.9 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 177 ata1: SATA max UDMA/100 cmd 0xF881C080 ctl 0xF881C08A bmdma 0xF881C000 irq 177 ata2: SATA max UDMA/100 cmd 0xF881C0C0 ctl 0xF881C0CA bmdma 0xF881C008 irq 177 Time: acpi_pm clocksource has been installed. hrtimers: Switched to high resolution mode CPU 1 hrtimers: Switched to high resolution mode CPU 0 ata1: SATA link down (SStatus 0) scsi0 : sata_sil ata2: SATA link down (SStatus 0) scsi1 : sata_sil sata_nv 0000:00:0a.0: version 0.8 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 185 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata3: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 185 ata4: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 185 ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:407f ata3: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48 nv_sata: Primary device added ata3: dev 0 configured for UDMA/133 scsi2 : sata_nv nv_sata: Primary device removed nv_sata: Secondary device removed ata4: SATA link down (SStatus 0) scsi3 : sata_nv Vendor: ATA Model: ST380817AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > sd 2:0:0:0: Attached scsi disk sda EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. EXT3-fs: recovery complete. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 889 types, 109 bools security: 55 classes, 244452 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193 ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 201 ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.10/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:4952: Hammerfall-DSP: Firmware already present, initializing card. ALSA /usr/src/rpm/BUILD/alsa-driver-1.0.10/acore/init.c:106: cannot find the slot for index 0 (range 0-0) Intel ICH: probe of 0000:00:06.0 failed with error -12 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 209 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: irq 209, io mem 0xf6005000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 217 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 217, io mem 0xf6003000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 185 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 185, io mem 0xf6004000 usb 2-3: new low speed USB device using ohci_hcd and address 2 input: Logitech USB-PS/2 Optical Mouse as /class/input/input0 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 201 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[f5018000-f50187ff] Max Packet=[4096] usb 3-3: new low speed USB device using ohci_hcd and address 2 input: Logitech Logitech USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3 input: Logitech Logitech USB Keyboard as /class/input/input2 input: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:02.1-3 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea560057330b] eth0: network connection up using port A speed: 1000 autonegotiation: yes duplex mode: full flowctrl: symmetric role: slave irq moderation: disabled scatter-gather: enabled NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. cdrom: open failed. EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda5, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.6 SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts eth0: no IPv6 routers present ip_tables: (C) 2000-2002 Netfilter core team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ ipt_owner: pid, sid and command matching not supported anymore SELinux: initialized (dev autofs, type autofs), uses genfs_contexts parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready SELinux: initialized (dev 0:18, type nfs), uses genfs_contexts SELinux: initialized (dev 0:19, type nfs), uses genfs_contexts [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 225 [drm] Initialized radeon 1.19.0 20050911 on minor 0: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode SELinux: initialized (dev 0:1a, type nfs), uses genfs_contexts SELinux: initialized (dev 0:12, type nfs), uses genfs_contexts SELinux: initialized (dev 0:1b, type nfs), uses genfs_contexts WARNING: sbcl/5362 changed soft IRQ-flags. [] local_irq_enable+0x16/0x29 (8) [] do_int3+0x7f/0x81 (8) [] int3+0x1e/0x24 (48) --=-XPiqtSGJLhncObNTba8R-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/