From: Matt Heler <lkml@lpbproductions.com>
Reply-To: lkml@lpbproductions.com
To: "Bill Rugolsky Jr." <bill@rugolsky.com>, Jeff Garzik <jeff@garzik.org>,
       linux-kernel@vger.kernel.org,
       "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>
Subject: Re: [PATCH][INCOMPLETE] sata_nv: merge ADMA support
Date: Mon, 27 Mar 2006 16:46:54 -0500
User-Agent: KMail/1.9.1
References: <20060317232339.GA5674@ti64.telemetry-investments.com> <200603262014.35466.lkml@lpbproductions.com> <20060327160845.GG9411@ti64.telemetry-investments.com>
In-Reply-To: <20060327160845.GG9411@ti64.telemetry-investments.com>
MIME-Version: 1.0
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Message-Id: <200603271646.55317.lkml@lpbproductions.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2706
Lines: 76

Hey Bill,

I spoke abit to soon though regarding that stability.. After booting up X and 
running Azerues and kde, my system stalled and locked. However it lasted much 
longer then Jeff's version. 

I'm running the DFI Lanparty with an Athlon 4400. I also have the following 
setup

2x300gb seagate drives 7200.8 in a raid0 format with ext3
2x400gb seagate drives 7200.9 again in a raid0 format with ext3

and lspci gives me the following :: 

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a3)


On Monday 27 March 2006 11:08 am, Bill Rugolsky Jr. wrote:
> On Sun, Mar 26, 2006 at 08:14:35PM -0500, Matt Heler wrote:
> > Using Bill's original patch I was able to boot up perfectly with adma
> > support enabled on my workstation. Even after several stress tests (
> > tar -cf /dev/null . , and dd if=/dev/sda of=/dev/null ), everything seems
> > to be a-ok. However when I tried the sata_nv.c file that you sent to
> > Bill, I kept on getting hardlocks, and thus was unable to stress test
> > your version.
> >
> > Also for note, I heve not received any of the timeout problems reported
> > by Bill. Nor have I had any latency problems with adma enabled.
>
> Matt,
>
> Nice to see some value falling out of this sata_nv thread.  Did you see
> latency problems before enabling ADMA?
>
> Would you provide some specifics on your setup?
>
> Which motherboard, #CPUs, BIOS revision, kernel, MD/LVM2/fs?
>
> On two of my Tyan S2895 machines, including the one that I'm using for
> testing, lspci says:
>
> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev
> f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
> (rev f3)
>
> and dmidecode says:
>
> BIOS Information
>         Vendor: Phoenix Technologies Ltd.
>         Version: 2004Q3
>         Release Date: 10/12/2005
>
> The other, where I first had lost tick problems, says:
>
> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
> 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev
> a3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
> (rev a3)
>
> BIOS Information
> 	Vendor: Phoenix Technologies Ltd.
> 	Version: 2004Q3
> 	Release Date: 06/07/2005
>
>
> Thanks,
>
> 	Bill
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/