Received: by 2002:a05:6902:102b:0:0:0:0 with SMTP id x11csp103207ybt; Tue, 23 Jun 2020 16:30:20 -0700 (PDT) X-Google-Smtp-Source: ABdhPJzBFeTrbCuGEuXm/hqXmLhILf+RHiL+cZCqIk0sgoYfPYdHdtO+q2IKae/f1bx/MFtR+Z18 X-Received: by 2002:a17:907:1002:: with SMTP id ox2mr8800499ejb.358.1592955019855; Tue, 23 Jun 2020 16:30:19 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592955019; cv=none; d=google.com; s=arc-20160816; b=mIPPtDd5qN7emZlI4LDmSetUdXhDYAmtbgQWXHaoe5xn1AEZ2NQn3q05ukPesPC6M1 hpixD6EanAAlESU+uy/D+x5p+yqzByVVodpOBDfaRXdY0hgm3cp1KwmgEml4LTUc933q LNeFq6ZB5Ek8bbOtCTPLpZySezXrN3ljR3Bp0ZHYknU3gzZIl1v9cCTWGb9kw91kMx/N ahvUk7zEEAvhargAsTk2cLdqge1iLvflMYAPM7wCZ1UhtWL5b9+mg4E4Iuzt7ZBSh9+m w2JyEPvimJJ1T6hzcvfol0lMk0trS0UfZemcopC+r95LziP2nIjU+xX+DJGDGdMYTaK5 shwg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:in-reply-to:content-disposition :mime-version:references:message-id:subject:cc:to:from:date :dkim-signature; bh=UD5nWf4U2HadZT0WiGU1zPUMGNoYvHVSdWTqdhPcX6w=; b=bI9zXjn2LZnhrsbNFtzO9OqZ8m/jWgJ6vg3ZAYgd0RgIhzD+2UQgiNw0eosDDMKggl Jawt2P4GwRxy2LYa7Di5BcJCR6IoehfDpgFn6jH1QUfJ3h0/W1V09vRGcBeDX5275eEa mHHUyhV3cKkQBY9xkDUEhkouzXkCsjvsBLjOouz5DfGHyyw9SNDW1/VaaBZ65VN6GqwO f09L8XK7REPx7aerEfUYUgZfvIFgzMpOGv+o2tAFGahI4UONwho/CMl82RZGrS19LZwa CveYxjxiiA5qltgnQ7CEq9QbEIxMzUV8wvev9NMof7rEgFx9P8t9HX0m2BWYnEUWxYoM TDjQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=OJESno1K; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id m3si2022567edv.382.2020.06.23.16.29.50; Tue, 23 Jun 2020 16:30:19 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=OJESno1K; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2387854AbgFWX13 (ORCPT + 99 others); Tue, 23 Jun 2020 19:27:29 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53048 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2387725AbgFWX12 (ORCPT ); Tue, 23 Jun 2020 19:27:28 -0400 Received: from mail-pj1-x1042.google.com (mail-pj1-x1042.google.com [IPv6:2607:f8b0:4864:20::1042]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4BAAEC061795 for ; Tue, 23 Jun 2020 16:27:28 -0700 (PDT) Received: by mail-pj1-x1042.google.com with SMTP id jz3so191204pjb.0 for ; Tue, 23 Jun 2020 16:27:28 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=UD5nWf4U2HadZT0WiGU1zPUMGNoYvHVSdWTqdhPcX6w=; b=OJESno1K0RFUZUAD0iwV603z8DFB/Gb+RiDpbJ9MHE1z1MPIsvHTuwh6IDNAlszMo/ Fee0TYbX65z6jr5kbSjvTkdDX9TfeiUzrdltw2M1scIfQWYe6we/cvgM3fnZFUBV6g43 E48dE0XXjZnWqkjoulFRUHU5OH2M4rQYhep+hYsfni34PcDMwI1Q//xgiH4oXTz1ILMg Tmt1xGnipKEKQ16COgCyZmCC29nN67mJi/xgumoxFWXs/JLF2LAoUEmeUFP2KrI867IK Lkq+8plsB07U6cELDpoOV9ejTTU2nnNw9S+caLqy2AZ/1HNBQSb0hXa1JR4LuqzureHa Cn0w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=UD5nWf4U2HadZT0WiGU1zPUMGNoYvHVSdWTqdhPcX6w=; b=YN5eB49cd7oh4JCXR4e5b5ZKQf/A0WMukfbwItQxqrfVuJ/f4XFtG15W3ammYa5b42 5rPPvp1WOGx5CTIVe6Xw6eduIAfrEOGuy+Ge8YIYD3UGufEya3Bfx+bUafysMmLFzRjS TtSqArHIRErGnZIvP6jIJ2cRytHEn3EVQIR26v9X/NMzUITncKelD7XIDQ2UBzUO/oMd 0DzGaU+/09RyFqegu2wINqqxSZSmXFVYaFiZ3RvvKMU+F2hR/HWjbOW2T4ZRZeJoR2gX ixoB2cfmxPKd3njFO2GfrLWorC4ExIfyy/pLY2wKRAWZRA6vKMcrlHxdHpmhp4EfbxlR ONFg== X-Gm-Message-State: AOAM533ID+HUgB8k0V0zJPVe256lF8W0fZfw/JkfQkiujK4cjuyMfvuT WfGJ1QwPe60qFGj+oRJ4x6eEEQ== X-Received: by 2002:a17:90a:2a04:: with SMTP id i4mr25473901pjd.91.1592954847618; Tue, 23 Jun 2020 16:27:27 -0700 (PDT) Received: from builder.lan (104-188-17-28.lightspeed.sndgca.sbcglobal.net. [104.188.17.28]) by smtp.gmail.com with ESMTPSA id d18sm1617294pjz.11.2020.06.23.16.27.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 23 Jun 2020 16:27:27 -0700 (PDT) Date: Tue, 23 Jun 2020 16:24:44 -0700 From: Bjorn Andersson To: Konrad Dybcio Cc: skrzynka@konradybcio.pl, Andy Gross , Rob Herring , Kees Cook , Anton Vorontsov , Colin Cross , Tony Luck , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v2 11/12] arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead. Message-ID: <20200623232444.GQ128451@builder.lan> References: <20200623224813.297077-1-konradybcio@gmail.com> <20200623224813.297077-12-konradybcio@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20200623224813.297077-12-konradybcio@gmail.com> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue 23 Jun 15:48 PDT 2020, Konrad Dybcio wrote: > This was the only device using that dtsi, so no point > keeping it separate AND with a confusing name (bullhead > is based on msm8992 and the file contains regulator > values for that specific board). > > Signed-off-by: Konrad Dybcio > --- > .../dts/qcom/msm8992-bullhead-rev-101.dts | 264 ++++++++++++++++- > arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------ > 2 files changed, 263 insertions(+), 269 deletions(-) > delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts > index 32670d5afdd6..893fc5b8fc34 100644 > --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts > +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts > @@ -47,4 +47,266 @@ ramoops@1ff00000 { > }; > }; > > -#include "msm8994-smd-rpm.dtsi" > +&smd_rpm { > + rpm { > + rpm_requests { Per my request on the earlier regulator patch, please leave msm8992/msm8994.dtsi without any regulators defined (clocks and rpmpd is fine) and then add them here to &rpm_requests.o I.e. pretty much what you're doing here, but remove two indentation levels and add compatible and labels to these regulators. Regards, Bjorn > + pm8994-regulators { > + > + vdd_l1-supply = <&pm8994_s1>; > + vdd_l2_26_28-supply = <&pm8994_s3>; > + vdd_l3_11-supply = <&pm8994_s3>; > + vdd_l4_27_31-supply = <&pm8994_s3>; > + vdd_l5_7-supply = <&pm8994_s3>; > + vdd_l6_12_32-supply = <&pm8994_s5>; > + vdd_l8_16_30-supply = <&vreg_vph_pwr>; > + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; > + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; > + vdd_l14_15-supply = <&pm8994_s5>; > + vdd_l17_29-supply = <&vreg_vph_pwr>; > + vdd_l20_21-supply = <&vreg_vph_pwr>; > + vdd_l25-supply = <&pm8994_s5>; > + vdd_lvs1_2 = <&pm8994_s4>; > + > + s1 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <800000>; > + }; > + > + s2 { > + /* TODO */ > + }; > + > + s3 { > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1300000>; > + }; > + > + s4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-allow-set-load; > + regulator-system-load = <325000>; > + }; > + > + s5 { > + regulator-min-microvolt = <2150000>; > + regulator-max-microvolt = <2150000>; > + }; > + > + s7 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + l1 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + l2 { > + regulator-min-microvolt = <1250000>; > + regulator-max-microvolt = <1250000>; > + }; > + > + l3 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + l4 { > + regulator-min-microvolt = <1225000>; > + regulator-max-microvolt = <1225000>; > + }; > + > + l5 { > + /* TODO */ > + }; > + > + l6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l7 { > + /* TODO */ > + }; > + > + l8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + }; > + > + l11 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + qcom,init-voltage = <1200000>; > + }; > + > + l12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + proxy-supply = <&pm8994_l12>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + status = "okay"; > + }; > + > + l13 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + qcom,init-voltage = <2950000>; > + status = "okay"; > + }; > + > + l14 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + qcom,init-voltage = <1200000>; > + proxy-supply = <&pm8994_l14>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + status = "okay"; > + }; > + > + l15 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + status = "okay"; > + }; > + > + l16 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > + qcom,init-voltage = <2700000>; > + status = "okay"; > + }; > + > + l17 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > + qcom,init-voltage = <2700000>; > + status = "okay"; > + }; > + > + l18 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + qcom,init-voltage = <3000000>; > + qcom,init-ldo-mode = <1>; > + }; > + > + l19 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + status = "okay"; > + }; > + > + l20 { > + regulator-min-microvolt = <2950000>; > + regulator-max-microvolt = <2950000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-allow-set-load; > + regulator-system-load = <570000>; > + }; > + > + l21 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + qcom,init-voltage = <1800000>; > + }; > + > + l22 { > + regulator-min-microvolt = <3100000>; > + regulator-max-microvolt = <3100000>; > + qcom,init-voltage = <3100000>; > + }; > + > + l23 { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + qcom,init-voltage = <2800000>; > + }; > + > + l24 { > + regulator-min-microvolt = <3075000>; > + regulator-max-microvolt = <3150000>; > + qcom,init-voltage = <3075000>; > + }; > + > + l25 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + }; > + > + l26 { > + /* TODO: value from downstream > + regulator-min-microvolt = <987500>; > + fails to apply */ > + }; > + > + l27 { > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1050000>; > + qcom,init-voltage = <1050000>; > + }; > + > + l28 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + qcom,init-voltage = <1000000>; > + proxy-supply = <&pm8994_l28>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + }; > + > + l29 { > + /* TODO: Unsupported voltage range. > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + qcom,init-voltage = <2800000>; > + */ > + }; > + > + l30 { > + /* TODO: get this verified > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + */ > + }; > + > + l31 { > + regulator-min-microvolt = <1262500>; > + regulator-max-microvolt = <1262500>; > + qcom,init-voltage = <1262500>; > + }; > + > + l32 { > + /* TODO: get this verified > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + */ > + }; > + }; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi > deleted file mode 100644 > index 31e3eb6ab515..000000000000 > --- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi > +++ /dev/null > @@ -1,268 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/* Copyright (c) 2015, LGE Inc. All rights reserved. > - * Copyright (c) 2016, The Linux Foundation. All rights reserved. > - */ > - > -&smd_rpm { > - rpm { > - rpm_requests { > - pm8994-regulators { > - > - vdd_l1-supply = <&pm8994_s1>; > - vdd_l2_26_28-supply = <&pm8994_s3>; > - vdd_l3_11-supply = <&pm8994_s3>; > - vdd_l4_27_31-supply = <&pm8994_s3>; > - vdd_l5_7-supply = <&pm8994_s3>; > - vdd_l6_12_32-supply = <&pm8994_s5>; > - vdd_l8_16_30-supply = <&vreg_vph_pwr>; > - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; > - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; > - vdd_l14_15-supply = <&pm8994_s5>; > - vdd_l17_29-supply = <&vreg_vph_pwr>; > - vdd_l20_21-supply = <&vreg_vph_pwr>; > - vdd_l25-supply = <&pm8994_s5>; > - vdd_lvs1_2 = <&pm8994_s4>; > - > - s1 { > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <800000>; > - }; > - > - s2 { > - /* TODO */ > - }; > - > - s3 { > - regulator-min-microvolt = <1300000>; > - regulator-max-microvolt = <1300000>; > - }; > - > - s4 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-allow-set-load; > - regulator-system-load = <325000>; > - }; > - > - s5 { > - regulator-min-microvolt = <2150000>; > - regulator-max-microvolt = <2150000>; > - }; > - > - s7 { > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - }; > - > - l1 { > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - }; > - > - l2 { > - regulator-min-microvolt = <1250000>; > - regulator-max-microvolt = <1250000>; > - }; > - > - l3 { > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - }; > - > - l4 { > - regulator-min-microvolt = <1225000>; > - regulator-max-microvolt = <1225000>; > - }; > - > - l5 { > - /* TODO */ > - }; > - > - l6 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - l7 { > - /* TODO */ > - }; > - > - l8 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - l9 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - }; > - > - l10 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - qcom,init-voltage = <1800000>; > - }; > - > - l11 { > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - qcom,init-voltage = <1200000>; > - }; > - > - l12 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - qcom,init-voltage = <1800000>; > - proxy-supply = <&pm8994_l12>; > - qcom,proxy-consumer-enable; > - qcom,proxy-consumer-current = <10000>; > - status = "okay"; > - }; > - > - l13 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <2950000>; > - qcom,init-voltage = <2950000>; > - status = "okay"; > - }; > - > - l14 { > - regulator-min-microvolt = <1200000>; > - regulator-max-microvolt = <1200000>; > - qcom,init-voltage = <1200000>; > - proxy-supply = <&pm8994_l14>; > - qcom,proxy-consumer-enable; > - qcom,proxy-consumer-current = <10000>; > - status = "okay"; > - }; > - > - l15 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - qcom,init-voltage = <1800000>; > - status = "okay"; > - }; > - > - l16 { > - regulator-min-microvolt = <2700000>; > - regulator-max-microvolt = <2700000>; > - qcom,init-voltage = <2700000>; > - status = "okay"; > - }; > - > - l17 { > - regulator-min-microvolt = <2700000>; > - regulator-max-microvolt = <2700000>; > - qcom,init-voltage = <2700000>; > - status = "okay"; > - }; > - > - l18 { > - regulator-min-microvolt = <3000000>; > - regulator-max-microvolt = <3000000>; > - regulator-always-on; > - qcom,init-voltage = <3000000>; > - qcom,init-ldo-mode = <1>; > - }; > - > - l19 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - qcom,init-voltage = <1800000>; > - status = "okay"; > - }; > - > - l20 { > - regulator-min-microvolt = <2950000>; > - regulator-max-microvolt = <2950000>; > - regulator-always-on; > - regulator-boot-on; > - regulator-allow-set-load; > - regulator-system-load = <570000>; > - }; > - > - l21 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - regulator-always-on; > - qcom,init-voltage = <1800000>; > - }; > - > - l22 { > - regulator-min-microvolt = <3100000>; > - regulator-max-microvolt = <3100000>; > - qcom,init-voltage = <3100000>; > - }; > - > - l23 { > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - qcom,init-voltage = <2800000>; > - }; > - > - l24 { > - regulator-min-microvolt = <3075000>; > - regulator-max-microvolt = <3150000>; > - qcom,init-voltage = <3075000>; > - }; > - > - l25 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - qcom,init-voltage = <1800000>; > - }; > - > - l26 { > - /* TODO: value from downstream > - regulator-min-microvolt = <987500>; > - fails to apply */ > - }; > - > - l27 { > - regulator-min-microvolt = <1050000>; > - regulator-max-microvolt = <1050000>; > - qcom,init-voltage = <1050000>; > - }; > - > - l28 { > - regulator-min-microvolt = <1000000>; > - regulator-max-microvolt = <1000000>; > - qcom,init-voltage = <1000000>; > - proxy-supply = <&pm8994_l28>; > - qcom,proxy-consumer-enable; > - qcom,proxy-consumer-current = <10000>; > - }; > - > - l29 { > - /* TODO: Unsupported voltage range. > - regulator-min-microvolt = <2800000>; > - regulator-max-microvolt = <2800000>; > - qcom,init-voltage = <2800000>; > - */ > - }; > - > - l30 { > - /* TODO: get this verified > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - qcom,init-voltage = <1800000>; > - */ > - }; > - > - l31 { > - regulator-min-microvolt = <1262500>; > - regulator-max-microvolt = <1262500>; > - qcom,init-voltage = <1262500>; > - }; > - > - l32 { > - /* TODO: get this verified > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - qcom,init-voltage = <1800000>; > - */ > - }; > - }; > - }; > - }; > -}; > -- > 2.27.0 >