Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
In-Reply-To: <9d3afac3-c245-a746-b029-77aa66c93f9d@kali.org>
References: <cover.1586374414.git.asutoshd@codeaurora.org> <3c186284280c37c76cf77bf482dde725359b8a8a.1586382357.git.asutoshd@codeaurora.org>
 <CAF6AEGvgmfYoybv4XMVVH85fGMr-eDfpzxdzkFWCx-2N5PEw2w@mail.gmail.com>
 <SN6PR04MB46402FD7981F9FCA2111AB37FC960@SN6PR04MB4640.namprd04.prod.outlook.com>
 <20200621075539.GK128451@builder.lan> <CAF6AEGuG3XAqN_sedxk9GRm_9yK+a4OH56CZPmbHx+SW-FNVPQ@mail.gmail.com>
 <CAP2JTQJ735yQYSeHgDPqnT0mRUTt1uKVAHacOHmSj3WK48PUog@mail.gmail.com>
 <SN6PR04MB4640DCE37D9D7F4CD99F2195FC940@SN6PR04MB4640.namprd04.prod.outlook.com>
 <CAP2JTQKu77risdNFBy5zwHoRU3qZw2dMi5Hxfi5Tyf6b9GB3XQ@mail.gmail.com> <9d3afac3-c245-a746-b029-77aa66c93f9d@kali.org>
From:   Kyuho Choi <chlrbgh0@gmail.com>
Date:   Wed, 24 Jun 2020 10:54:20 +0900
Message-ID: <CAP2JTQLdhmEfqEHU_kWWq=-jbjU=hyXe=G1_NwXUzJ9hs3N-dQ@mail.gmail.com>
Subject: Re: [PATCH v1 1/3] scsi: ufs: add write booster feature support
To:     Steev Klimaszewski <steev@kali.org>
Cc:     Avri Altman <Avri.Altman@wdc.com>, Rob Clark <robdclark@gmail.com>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Asutosh Das <asutoshd@codeaurora.org>,
        "cang@codeaurora.org" <cang@codeaurora.org>,
        "martin.petersen@oracle.com" <martin.petersen@oracle.com>,
        "linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
        linux-arm-msm <linux-arm-msm@vger.kernel.org>,
        Subhash Jadavani <subhashj@codeaurora.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        "James E.J. Bottomley" <jejb@linux.ibm.com>,
        Bean Huo <beanhuo@micron.com>,
        Stanley Chu <stanley.chu@mediatek.com>,
        Tomas Winkler <tomas.winkler@intel.com>,
        Colin Ian King <colin.king@canonical.com>,
        Bart Van Assche <bvanassche@acm.org>,
        open list <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Steev,

Thanks for share log!.

On 6/24/20, Steev Klimaszewski <steev@kali.org> wrote:
>
> On 6/23/20 1:51 AM, Kyuho Choi wrote:
>> Hi Avri,
>>
>> On 6/23/20, Avri Altman <Avri.Altman@wdc.com> wrote:
>>>> AFAIK, this device are ufs 2.1. It's not support writebooster.
>>>>
>>>> I'd check latest linux scsi branch and ufshcd_wb_config function's
>>>> called without device capability check.
>>> Please grep ufshcd_wb_probe.
>>>
>> I got your point, but as I mentioned, this device not support wb, this
>> is old products.
>>
>> I'm not sure ufshcd_wb_probe are called or not in Rob and Steev's
>> platform.
>> If it's called, hba->caps are setted with wb diable and this error not
>> occured.
>> But (it looks) not called, same query error will be occured in
>> ufshcd_wb_config/ctrl.
>>
>> BR,
>> Kyuho Choi
>
> I do show ufshcd_wb_probe in my sources - I'm based on 5.8-rc2 with a
> few extra patches for the c630, and the inline encryption patches.
>
> I this is the output that I see -
>
>  1.
>     [    0.702501] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
>     Unable to find vdd-hba-supply regulator, assuming enabled
>  2.
>     [    0.702506] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
>     Unable to find vccq-supply regulator, assuming enabled
>  3.
>     [    0.702508] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
>     Unable to find vccq2-supply regulator, assuming enabled
>  4.
>     [    0.703296] ufshcd-qcom 1d84000.ufshc: Found QC Inline Crypto
>     Engine (ICE) v3.1.75
>  5.
>     [    0.705121] scsi host0: ufshcd
>  6.
>     [    0.720163] ALSA device list:
>  7.
>     [    0.720171]   No soundcards found.
>  8.
>     [    0.731393] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
>     TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE],
>     rate = 0
>  9.
>     [    0.893738] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
>     TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
> 10.
>     [    0.894703] ufshcd-qcom 1d84000.ufshc:
>     ufshcd_find_max_sup_active_icc_level: Regulator capability was not
>     set, actvIccLevel=0
> 11.
>     [    0.896032] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 14 failed, err = 253
> 12.
>     [    0.896919] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 14 failed, err = 253
> 13.
>     [    0.897798] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 14 failed, err = 253
> 14.
>     [    0.898227] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag_retry:
>     query attribute, opcode 6, idn 14, failed with error 253 after 3
> retires
> 15.
>     [    0.898798] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_ctrl write
>     booster enable failed 253
> 16.
>     [    0.899150] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_config: Enable
>     WB failed: 253

Like here, as I mentioned in last. Some of UFS 2.1 device maybe got a
query fail like this.

> 17.
>     [    0.899918] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 16 failed, err = 253
> 18.
>     [    0.900448] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 16 failed, err = 253
> 19.
>     [    0.901290] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 16 failed, err = 253
> 20.
>     [    0.901749] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag_retry:
>     query attribute, opcode 6, idn 16, failed with error 253 after 3
> retires
> 21.
>     [    0.902285] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_config: En WB
>     flush during H8: failed: 253
> 22.
>     [    0.903105] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 15 failed, err = 253
> 23.
>     [    0.903988] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 15 failed, err = 253
> 24.
>     [    0.904866] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag: Sending
>     flag query for idn 15 failed, err = 253
> 25.
>     [    0.905294] ufshcd-qcom 1d84000.ufshc: ufshcd_query_flag_retry:
>     query attribute, opcode 6, idn 15, failed with error 253 after 3
> retires
> 26.
>     [    0.905859] ufshcd-qcom 1d84000.ufshc: ufshcd_wb_buf_flush_enable
>     WB - buf flush enable failed 253
> 27.
>     [    0.907659] scsi 0:0:0:49488: Well-known LUN    SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6

I'd searching this ufs device part no and it's ufs 2.1 too.

> 28.
>     [    0.911082] scsi 0:0:0:49476: Well-known LUN    SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 29.
>     [    0.913268] scsi 0:0:0:49456: Well-known LUN    SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 30.
>     [    0.914580] scsi 0:0:0:0: Direct-Access     SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 31.
>     [    0.915156] sd 0:0:0:0: Power-on or device reset occurred
> 32.
>     [    0.915311] scsi 0:0:0:1: Direct-Access     SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 33.
>     [    0.916104] scsi 0:0:0:2: Direct-Access     SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 34.
>     [    0.916318] sd 0:0:0:0: [sda] 29765632 4096-byte logical blocks:
>     (122 GB/114 GiB)
> 35.
>     [    0.916417] sd 0:0:0:0: [sda] Write Protect is off
> 36.
>     [    0.916424] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
> 37.
>     [    0.916589] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>     enabled, supports DPO and FUA
> 38.
>     [    0.916667] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
> 39.
>     [    0.916897] sd 0:0:0:1: Power-on or device reset occurred
> 40.
>     [    0.917131] scsi 0:0:0:3: Direct-Access     SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 41.
>     [    0.917498] sd 0:0:0:2: Power-on or device reset occurred
> 42.
>     [    0.917994] sd 0:0:0:3: Power-on or device reset occurred
> 43.
>     [    0.919301] scsi 0:0:0:4: Direct-Access     SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 44.
>     [    0.920207] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks:
>     (4.19 MB/4.00 MiB)
> 45.
>     [    0.920310] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks:
>     (134 MB/128 MiB)
> 46.
>     [    0.920312] sd 0:0:0:2: [sdc] Write Protect is off
> 47.
>     [    0.920317] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
> 48.
>     [    0.920405] sd 0:0:0:3: [sdd] Write Protect is off
> 49.
>     [    0.920410] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
> 50.
>     [    0.920642] sd 0:0:0:2: [sdc] Write cache: enabled, read cache:
>     enabled, supports DPO and FUA
> 51.
>     [    0.921151] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
> 52.
>     [    0.921212] sd 0:0:0:3: [sdd] Write cache: enabled, read cache:
>     enabled, supports DPO and FUA
> 53.
>     [    0.921526] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
> 54.
>     [    0.922585] sd 0:0:0:4: Power-on or device reset occurred
> 55.
>     [    0.922983] scsi 0:0:0:5: Direct-Access     SAMSUNG
>      KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
> 56.
>     [    0.923490] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks:
>     (4.19 MB/4.00 MiB)
> 57.
>     [    0.928867] sd 0:0:0:1: [sdb] Write Protect is off
> 58.
>     [    0.928870] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
> 59.
>     [    0.930887] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks:
>     (4.29 GB/4.00 GiB)
> 60.
>     [    0.931179] sd 0:0:0:1: [sdb] Write cache: enabled, read cache:
>     enabled, supports DPO and FUA
> 61.
>     [    0.932015] random: fast init done
> 62.
>     [    0.932022] sd 0:0:0:5: Power-on or device reset occurred
> 63.
>     [    0.935289] sd 0:0:0:4: [sde] Write Protect is off
> 64.
>     [    0.935293] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
> 65.
>     [    0.935396]  sda: sda1 sda2 sda3 sda4 sda5
> 66.
>     [    0.936047] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
> 67.
>     [    0.936358] sd 0:0:0:4: [sde] Write cache: enabled, read cache:
>     enabled, supports DPO and FUA
> 68.
>     [    0.936865] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
> 69.
>     [    0.938448]  sdc: sdc1 sdc2
> 70.
>     [    0.939470] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks:
>     (1.61 GB/1.50 GiB)
> 71.
>     [    0.939743] sd 0:0:0:5: [sdf] Write Protect is off
> 72.
>     [    0.939747] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
> 73.
>     [    0.940609] sd 0:0:0:5: [sdf] Write cache: enabled, read cache:
>     enabled, supports DPO and FUA
> 74.
>     [    0.940837] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
> 75.
>     [    0.940984] sd 0:0:0:0: [sda] Attached SCSI disk
> 76.
>     [    0.941150] sd 0:0:0:2: [sdc] Attached SCSI disk
> 77.
>     [    0.945814]  sdd: sdd2 sdd3
> 78.
>     [    0.945983]  sdf: sdf2 sdf3 sdf4 sdf5
> 79.
>     [    0.946701]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9
>     sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20
>     sde21 sde22 sde23 sde24 sde25 sde26 sde27
> 80.
>     [    0.953610]  sdb: sdb1 sdb2
> 81.
>     [    0.954035] sd 0:0:0:5: [sdf] Attached SCSI disk
> 82.
>     [    0.954131] sd 0:0:0:4: [sde] Attached SCSI disk
> 83.
>     [    0.954177] sd 0:0:0:3: [sdd] Attached SCSI disk
> 84.
>     [    0.955316] sd 0:0:0:1: [sdb] Attached SCSI disk
>
> Full dmesg output at https://pastebin.com/azWahunu
>
>
> -- Steev
>
>

BR,
Kyuho Choi