Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: vbJ+wb12l2XX+Uk8XxHQwhDRmdRW3cC81sEATNtnI0WauT3+X980ap4F/7sp5YmcYEVVqPwN6p
 zB7FD8f2ubLw==
IronPort-SDR: IK2B93vrGxkOX3auaaON3OXDiOil8mKogsFsuQ/9caFcYPW5aDAI8cfqTDzf6d5lchEqEI53Ly
 joke4krAoRFw==
Date:   Mon, 29 Jun 2020 10:22:02 +0300
From:   Heikki Krogerus <heikki.krogerus@linux.intel.com>
To:     Wesley Cheng <wcheng@codeaurora.org>
Cc:     agross@kernel.org, mark.rutland@arm.com,
        bjorn.andersson@linaro.org, gregkh@linuxfoundation.org,
        broonie@kernel.org, lgirdwood@gmail.com, robh+dt@kernel.org,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
        jackp@codeaurora.org, rdunlap@infradead.org
Subject: Re: [PATCH v4 1/6] usb: typec: Add QCOM PMIC typec detection driver
Message-ID: <20200629072202.GA856968@kuha.fi.intel.com>
References: <20200626185516.18018-1-wcheng@codeaurora.org>
 <20200626185516.18018-2-wcheng@codeaurora.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20200626185516.18018-2-wcheng@codeaurora.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Jun 26, 2020 at 11:55:11AM -0700, Wesley Cheng wrote:
> The QCOM SPMI typec driver handles the role and orientation detection, and
> notifies client drivers using the USB role switch framework.   It registers
> as a typec port, so orientation can be communicated using the typec switch
> APIs.  The driver also attains a handle to the VBUS output regulator, so it
> can enable/disable the VBUS source when acting as a host/device.
> 
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/Kconfig           |  12 ++
>  drivers/usb/typec/Makefile          |   1 +
>  drivers/usb/typec/qcom-pmic-typec.c | 275 ++++++++++++++++++++++++++++
>  3 files changed, 288 insertions(+)
>  create mode 100644 drivers/usb/typec/qcom-pmic-typec.c
> 
> diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> index b4f2aac7ae8a..595c14766e99 100644
> --- a/drivers/usb/typec/Kconfig
> +++ b/drivers/usb/typec/Kconfig
> @@ -72,6 +72,18 @@ config TYPEC_TPS6598X
>  	  If you choose to build this driver as a dynamically linked module, the
>  	  module will be called tps6598x.ko.
>  
> +config TYPEC_QCOM_PMIC
> +	tristate "Qualcomm PMIC USB Type-C driver"
> +	depends on ARCH_QCOM
> +	help
> +	  Driver for supporting role switch over the Qualcomm PMIC.  This will
> +	  handle the USB Type-C role and orientation detection reported by the
> +	  QCOM PMIC if the PMIC has the capability to handle USB Type-C
> +	  detection.
> +
> +	  It will also enable the VBUS output to connected devices when a
> +	  DFP connection is made.
> +
>  source "drivers/usb/typec/mux/Kconfig"
>  
>  source "drivers/usb/typec/altmodes/Kconfig"
> diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> index 7753a5c3cd46..cceffd987643 100644
> --- a/drivers/usb/typec/Makefile
> +++ b/drivers/usb/typec/Makefile
> @@ -6,4 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM)	+= tcpm/
>  obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
>  obj-$(CONFIG_TYPEC_HD3SS3220)	+= hd3ss3220.o
>  obj-$(CONFIG_TYPEC_TPS6598X)	+= tps6598x.o
> +obj-$(CONFIG_TYPEC_QCOM_PMIC)	+= qcom-pmic-typec.o
>  obj-$(CONFIG_TYPEC)		+= mux/
> diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
> new file mode 100644
> index 000000000000..5ae3af03c638
> --- /dev/null
> +++ b/drivers/usb/typec/qcom-pmic-typec.c
> @@ -0,0 +1,275 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/regmap.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_device.h>
> +#include <linux/usb/role.h>
> +#include <linux/usb/typec_mux.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define TYPEC_MISC_STATUS		0xb
> +#define CC_ATTACHED			BIT(0)
> +#define CC_ORIENTATION			BIT(1)
> +#define SNK_SRC_MODE			BIT(6)
> +#define TYPEC_MODE_CFG			0x44
> +#define TYPEC_DISABLE_CMD		BIT(0)
> +#define EN_SNK_ONLY			BIT(1)
> +#define EN_SRC_ONLY			BIT(2)
> +#define TYPEC_VCONN_CONTROL		0x46
> +#define VCONN_EN_SRC			BIT(0)
> +#define VCONN_EN_VAL			BIT(1)
> +#define TYPEC_EXIT_STATE_CFG		0x50
> +#define SEL_SRC_UPPER_REF		BIT(2)
> +#define TYPEC_INTR_EN_CFG_1		0x5e
> +#define TYPEC_INTR_EN_CFG_1_MASK	GENMASK(7, 0)
> +
> +struct qcom_pmic_typec {
> +	struct device		*dev;
> +	struct fwnode_handle	*fwnode;
> +	struct regmap		*regmap;
> +	u32			base;
> +
> +	struct typec_capability *cap;
> +	struct typec_port	*port;
> +	struct usb_role_switch *role_sw;
> +
> +	struct regulator	*vbus_reg;
> +	bool			vbus_enabled;
> +};
> +
> +static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec
> +							*qcom_usb, bool enable)
> +{
> +	int ret = 0;
> +
> +	if (enable == qcom_usb->vbus_enabled)
> +		return;
> +
> +	if (!qcom_usb->vbus_reg) {
> +		qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev,
> +							"usb_vbus");
> +		if (IS_ERR(qcom_usb->vbus_reg)) {
> +			qcom_usb->vbus_reg = NULL;
> +			return;
> +		}
> +	}
> +
> +	if (enable) {
> +		ret = regulator_enable(qcom_usb->vbus_reg);
> +		if (ret)
> +			return;
> +	} else {
> +		ret = regulator_disable(qcom_usb->vbus_reg);
> +		if (ret)
> +			return;
> +	}
> +	qcom_usb->vbus_enabled = enable;
> +}
> +
> +static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb)
> +{
> +	enum typec_orientation orientation;
> +	enum usb_role role;
> +	unsigned int stat;
> +	bool enable_vbus;
> +
> +	regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS,
> +		    &stat);
> +
> +	if (stat & CC_ATTACHED) {
> +		orientation = ((stat & CC_ORIENTATION) >> 1) ?
> +				TYPEC_ORIENTATION_REVERSE :
> +				TYPEC_ORIENTATION_NORMAL;
> +		typec_set_orientation(qcom_usb->port, orientation);
> +
> +		role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
> +		if (role == USB_ROLE_HOST)
> +			enable_vbus = true;
> +		else
> +			enable_vbus = false;
> +	} else {
> +		role = USB_ROLE_NONE;
> +		enable_vbus = false;
> +	}
> +
> +	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus);
> +	usb_role_switch_set_role(qcom_usb->role_sw, role);
> +}
> +
> +static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
> +{
> +	struct qcom_pmic_typec *qcom_usb = _qcom_usb;
> +
> +	qcom_pmic_typec_check_connection(qcom_usb);
> +	return IRQ_HANDLED;
> +}
> +
> +static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb)
> +{
> +	u8 mode = 0;
> +
> +	regmap_update_bits(qcom_usb->regmap,
> +			   qcom_usb->base + TYPEC_INTR_EN_CFG_1,
> +			   TYPEC_INTR_EN_CFG_1_MASK, 0);
> +
> +	if (qcom_usb->cap->type != TYPEC_PORT_DRP)
> +		mode = (qcom_usb->cap->type == TYPEC_PORT_SNK) ?
> +					EN_SNK_ONLY : EN_SRC_ONLY;
> +	regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG,
> +			   EN_SNK_ONLY | EN_SRC_ONLY, mode);
> +
> +	regmap_update_bits(qcom_usb->regmap,
> +			   qcom_usb->base + TYPEC_VCONN_CONTROL,
> +			   VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
> +	regmap_update_bits(qcom_usb->regmap,
> +			   qcom_usb->base + TYPEC_EXIT_STATE_CFG,
> +			   SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
> +}
> +
> +static int qcom_pmic_typec_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct qcom_pmic_typec *qcom_usb;
> +	struct typec_capability *cap;
> +	const char *buf;
> +	int ret, irq, role;
> +	u32 reg;
> +
> +	ret = of_property_read_u32(dev->of_node, "reg", &reg);
> +	if (ret < 0) {
> +		dev_err(dev, "missing base address");
> +		return ret;
> +	}
> +
> +	qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL);
> +	if (!qcom_usb)
> +		return -ENOMEM;
> +
> +	qcom_usb->dev = dev;
> +	qcom_usb->base = reg;
> +
> +	qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
> +	if (!qcom_usb->regmap) {
> +		dev_err(dev, "Failed to get regmap\n");
> +		return -EINVAL;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(dev, "Failed to get CC irq\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL,
> +					qcom_pmic_typec_interrupt, IRQF_ONESHOT,
> +					"qcom-pmic-typec", qcom_usb);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Could not request IRQ\n");
> +		return ret;
> +	}
> +
> +	qcom_usb->fwnode = device_get_named_child_node(dev, "connector");
> +	if (!qcom_usb->fwnode)
> +		return -EINVAL;
> +
> +	cap = devm_kzalloc(dev, sizeof(*cap), GFP_KERNEL);
> +	if (!cap) {
> +		ret = -ENOMEM;
> +		goto err_put_node;
> +	}
> +
> +	ret = fwnode_property_read_string(qcom_usb->fwnode, "power-role", &buf);
> +	if (!ret) {
> +		role = typec_find_port_power_role(buf);
> +		if (role < 0)
> +			role = TYPEC_PORT_SNK;
> +	} else {
> +		role = TYPEC_PORT_SNK;
> +	}
> +	cap->type = role;
> +
> +	ret = fwnode_property_read_string(qcom_usb->fwnode, "data-role", &buf);
> +	if (!ret) {
> +		role = typec_find_port_data_role(buf);
> +		if (role < 0)
> +			role = TYPEC_PORT_UFP;
> +	} else {
> +		role = TYPEC_PORT_UFP;
> +	}
> +	cap->data = role;
> +
> +	cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
> +	cap->fwnode = qcom_usb->fwnode;
> +	qcom_usb->port = typec_register_port(dev, cap);
> +	if (IS_ERR(qcom_usb->port)) {
> +		ret = PTR_ERR(qcom_usb->port);
> +		dev_err(dev, "Failed to register type c port %d\n", ret);
> +		goto err_put_node;
> +	}
> +
> +	qcom_usb->cap = cap;
> +
> +	qcom_usb->role_sw = fwnode_usb_role_switch_get(qcom_usb->fwnode);
> +	if (IS_ERR(qcom_usb->role_sw)) {
> +		if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
> +			dev_err(dev, "failed to get role switch\n");
> +		ret = PTR_ERR(qcom_usb->role_sw);
> +		goto err_typec_port;
> +	}
> +
> +	platform_set_drvdata(pdev, qcom_usb);
> +	qcom_pmic_typec_typec_hw_init(qcom_usb);
> +	qcom_pmic_typec_check_connection(qcom_usb);
> +
> +	return 0;
> +
> +err_typec_port:
> +	typec_unregister_port(qcom_usb->port);
> +err_put_node:
> +	fwnode_handle_put(qcom_usb->fwnode);
> +
> +	return ret;
> +}
> +
> +static int qcom_pmic_typec_remove(struct platform_device *pdev)
> +{
> +	struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
> +
> +	usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
> +	qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0);
> +
> +	typec_unregister_port(qcom_usb->port);
> +	usb_role_switch_put(qcom_usb->role_sw);
> +	fwnode_handle_put(qcom_usb->fwnode);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id qcom_pmic_typec_table[] = {
> +	{ .compatible = "qcom,pm8150b-usb-typec" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
> +
> +static struct platform_driver qcom_pmic_typec = {
> +	.driver = {
> +		.name = "qcom,pmic-typec",
> +		.of_match_table = qcom_pmic_typec_table,
> +	},
> +	.probe = qcom_pmic_typec_probe,
> +	.remove = qcom_pmic_typec_remove,
> +};
> +
> +module_platform_driver(qcom_pmic_typec);
> +
> +MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

thanks,

-- 
heikki