Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Anson Huang <Anson.Huang@nxp.com>
To:     linux@armlinux.org.uk, shawnguo@kernel.org, s.hauer@pengutronix.de,
        kernel@pengutronix.de, festevam@gmail.com, mturquette@baylibre.com,
        sboyd@kernel.org, oleksandr.suvorov@toradex.com,
        stefan.agner@toradex.com, arnd@arndb.de, peng.fan@nxp.com,
        abel.vesa@nxp.com, aisheng.dong@nxp.com, fugang.duan@nxp.com,
        daniel.baluta@nxp.com, yuehaibing@huawei.com, sfr@canb.auug.org.au,
        viro@zeniv.linux.org.uk, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Cc:     Linux-imx@nxp.com
Subject: [PATCH V3 03/10] ARM: imx: Select MXC_CLK for each SoC
Date:   Mon, 29 Jun 2020 13:53:55 +0800
Message-Id: <1593410042-10598-4-git-send-email-Anson.Huang@nxp.com>
In-Reply-To: <1593410042-10598-1-git-send-email-Anson.Huang@nxp.com>
References: <1593410042-10598-1-git-send-email-Anson.Huang@nxp.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

i.MX common clock drivers may support module build, so it is NOT
selected by default, for ARCH_MXC ARMv7 platforms, need to select
it manually in each SoC to make build pass.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V2:
	- manually select the MXC_CLK in each SoC instead of selecting it
	  for ARCH_MXC.
---
 arch/arm/mach-imx/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e7d7b90..a465c0f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -58,6 +58,7 @@ config SOC_IMX21
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
+	select MXC_CLK
 
 config SOC_IMX27
 	bool
@@ -65,17 +66,20 @@ config SOC_IMX27
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 	select PINCTRL_IMX27
+	select MXC_CLK
 
 config SOC_IMX31
 	bool
 	select CPU_V6
 	select MXC_AVIC
+	select MXC_CLK
 
 config SOC_IMX35
 	bool
 	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
 	select PINCTRL_IMX35
+	select MXC_CLK
 
 if ARCH_MULTI_V5
 
@@ -419,6 +423,7 @@ config SOC_IMX1
 	select CPU_ARM920T
 	select MXC_AVIC
 	select PINCTRL_IMX1
+	select MXC_CLK
 	help
 	  This enables support for Freescale i.MX1 processor
 
@@ -432,6 +437,7 @@ config SOC_IMX25
 	select CPU_ARM926T
 	select MXC_AVIC
 	select PINCTRL_IMX25
+	select MXC_CLK
 	help
 	  This enables support for Freescale i.MX25 processor
 endif
@@ -444,6 +450,7 @@ config SOC_IMX5
 	bool
 	select HAVE_IMX_SRC
 	select MXC_TZIC
+	select MXC_CLK
 
 config	SOC_IMX50
 	bool "i.MX50 support"
@@ -477,6 +484,7 @@ config SOC_IMX6
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select MFD_SYSCON
+	select MXC_CLK
 	select PL310_ERRATA_769419 if CACHE_L2X0
 
 config SOC_IMX6Q
@@ -561,6 +569,7 @@ config SOC_IMX7D_CM4
 config SOC_IMX7D
 	bool "i.MX7 Dual support"
 	select PINCTRL_IMX7D
+	select MXC_CLK
 	select SOC_IMX7D_CA7 if ARCH_MULTI_V7
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
 	select ARM_ERRATA_814220 if ARCH_MULTI_V7
@@ -571,6 +580,7 @@ config SOC_IMX7ULP
 	bool "i.MX7ULP support"
 	select CLKSRC_IMX_TPM
 	select PINCTRL_IMX7ULP
+	select MXC_CLK
 	select SOC_IMX7D_CA7 if ARCH_MULTI_V7
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
 	help
@@ -580,6 +590,7 @@ config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7
 	select PINCTRL_VF610
+	select MXC_CLK
 
 	help
 	  This enables support for Freescale Vybrid VF610 processor.
-- 
2.7.4