Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 29 Jun 2020 15:02:00 +0300
From:   Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To:     Vinod Koul <vkoul@kernel.org>
Cc:     linux-kernel@vger.kernel.org,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>,
        Michal Simek <michal.simek@xilinx.com>
Subject: Re: [PATCH v8 0/3] phy: zynqmp: Add PHY driver for the Xilinx ZynqMP
 Gigabit Transceiver
Message-ID: <20200629120200.GA10648@pendragon.ideasonboard.com>
References: <20200513172239.26444-1-laurent.pinchart@ideasonboard.com>
 <20200629093943.GB2599@vkoul-mobl>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20200629093943.GB2599@vkoul-mobl>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Vinod,

On Mon, Jun 29, 2020 at 03:09:43PM +0530, Vinod Koul wrote:
> On 13-05-20, 20:22, Laurent Pinchart wrote:
> > Hello,
> > 
> > The patch series adds a PHY driver for the Xilinx ZynqMP gigabit serial
> > transceivers (PS-GTR). The PS-GTR is a set of 4 PHYs that can be used by
> > the PCIe, USB 3.0, DisplayPort, SATA and Ethernet controllers that are
> > part of the Serial I/O Unit (SIOU).
> > 
> > The code is based on a previous version sent by Anurag Kumar Vulisha and
> > available at [1]. The DT bindings have been converted to YAML, and both
> > the bindings and the driver have been considerably reworked (and
> > simplified). The most notable changes is the removal of manual handling
> > of the reset lines of the PHY users (which belongs to the PHY users
> > themselves), and moving to the standard PHY .power_on() and .configure()
> > operations to replace functions that were previously exported by the
> > driver. Please see individual patches for a more detailed changelog.
> > 
> > Compared to v7, review comments on the PHY driver have been taken into
> > account, and the DT bindings have switched to the GPL-2.0-only OR
> > BSD-2-Clause license
> > 
> > The code is based on v5.6 and has been tested with DisplayPort on the
> > Xilinx ZC106 board.
> 
> This (dt patch and 8.1 update) fails to apply for me, can you please
> rebased on phy-next and resend. Also I saw this while trying to apply:
> 
> WARNING: Misordered MAINTAINERS entry - list 'S:' before 'T:'
> #403: FILE: MAINTAINERS:18605:
> +T:	git https://github.com/Xilinx/linux-xlnx.git
> +S:	Supported

Rebased, fixed and resent.

-- 
Regards,

Laurent Pinchart