Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Lee Jones <lee.jones@linaro.org>
To:     arnd@arndb.de, gregkh@linuxfoundation.org
Cc:     linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Lee Jones <lee.jones@linaro.org>, Stefan Roese <sr@denx.de>
Subject: [PATCH 12/20] misc: lattice-ecp3-config: Remove set but clearly unused variable 'ret'
Date:   Mon, 29 Jun 2020 15:04:34 +0100
Message-Id: <20200629140442.1043957-13-lee.jones@linaro.org>
In-Reply-To: <20200629140442.1043957-1-lee.jones@linaro.org>
References: <20200629140442.1043957-1-lee.jones@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

It's odd for the return value to be assigned to a variable so many
times, but never actually checked, but this has been the case since
the driver's inception in 2012.  If it hasn't caused any issues by
now, it's probably unlikely to.  Let's take it out, at least until
someone finds a reason to start using it.

Fixes the following W=1 kernel build warning:

 drivers/misc/lattice-ecp3-config.c: In function ‘firmware_load’:
 drivers/misc/lattice-ecp3-config.c:70:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
 70 | int ret;
 | ^~~

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/misc/lattice-ecp3-config.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 884485c3f7232..5eaf74447ca1e 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -67,7 +67,6 @@ static void firmware_load(const struct firmware *fw, void *context)
 	struct spi_device *spi = (struct spi_device *)context;
 	struct fpga_data *data = spi_get_drvdata(spi);
 	u8 *buffer;
-	int ret;
 	u8 txbuf[8];
 	u8 rxbuf[8];
 	int rx_len = 8;
@@ -92,7 +91,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 
 	/* Trying to speak with the FPGA via SPI... */
 	txbuf[0] = FPGA_CMD_READ_ID;
-	ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+	spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 	jedec_id = get_unaligned_be32(&rxbuf[4]);
 	dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id);
 
@@ -110,7 +109,7 @@ static void firmware_load(const struct firmware *fw, void *context)
 	dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name);
 
 	txbuf[0] = FPGA_CMD_READ_STATUS;
-	ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+	spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 	status = get_unaligned_be32(&rxbuf[4]);
 	dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
 
@@ -130,20 +129,20 @@ static void firmware_load(const struct firmware *fw, void *context)
 	memcpy(buffer + 4, fw->data, fw->size);
 
 	txbuf[0] = FPGA_CMD_REFRESH;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	txbuf[0] = FPGA_CMD_WRITE_EN;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	txbuf[0] = FPGA_CMD_CLEAR;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	/*
 	 * Wait for FPGA memory to become cleared
 	 */
 	for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) {
 		txbuf[0] = FPGA_CMD_READ_STATUS;
-		ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+		spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 		status = get_unaligned_be32(&rxbuf[4]);
 		if (status == FPGA_STATUS_CLEARED)
 			break;
@@ -160,13 +159,13 @@ static void firmware_load(const struct firmware *fw, void *context)
 	}
 
 	dev_info(&spi->dev, "Configuring the FPGA...\n");
-	ret = spi_write(spi, buffer, fw->size + 8);
+	spi_write(spi, buffer, fw->size + 8);
 
 	txbuf[0] = FPGA_CMD_WRITE_DIS;
-	ret = spi_write(spi, txbuf, 4);
+	spi_write(spi, txbuf, 4);
 
 	txbuf[0] = FPGA_CMD_READ_STATUS;
-	ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+	spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
 	status = get_unaligned_be32(&rxbuf[4]);
 	dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
 
-- 
2.25.1